2007

Alnaser, N. W. and Flanagan, R. (2007) The need of sustainable buildings construction in the Kingdom of Bahrain. Building and Environment, 42 (1). pp. 495-506. ISSN 0360-1323 doi: 10.1016/j.buildenv.2005.08.032

Alnaser, N. W., Flanagan, R., Al-Khalifa, S. E., Mumtaz, R., El-Masri, S. and Alnaser, W. E. (2007) Architectural, construction and environmental matters of Bahrain's international formula 1 circuit. Building and Environment, 42 (4). pp. 1783-1794. ISSN 0360-1323 doi: 10.1016/j.buildenv.2006.01.014

Awbi, H.B., ed. (2007) Ventilation systems- Design and performance. Taylor & Francis, pp464. ISBN 9780419217008

Bonser, R. H. C. and Vincent, J. F. V. (2007) Technology trajectories, innovation, and the growth of biomimetics. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 221 (10). pp. 1177-1180. ISSN 0954-4062 doi: 10.1243/09544062jmes522

Bradon, J. E., Chaplin, C. R. and Ermolaeva, N. S. (2007) Modelling the cabling of rope systems. Engineering Failure Analysis, 14 (5). pp. 920-934. ISSN 1350-6307 doi: 10.1016/j.engfailanal.2006.11.032

Cardellino, P. and Clements-Croome, D. (2007) Design quality in schools: Identifying suitable procurement and briefing processes. In: Proceedings of Clima 2007 Well-Being Indoors, Helsinki.

Chaplin, C.R., Bradon, J.E. and Ridge, I.M.L. (2007) Modelling fatigue damage distribution to inform slip and cut policy for riser tensioner ropes. In: OIPEEC Conference: ‘How to get the most out of your ropes’, Johannesburg, pp. 15-26.

Chen, Z. and Clements-Croome, D. (2007) An intelligent decision support system for the design and construction of building envelopes. In: Clima 2007 WellBeing Indoors, Helsinki.

Chen, Z., Clements-Croome, D. J., Hong, J., Li, H. and Xu, Q. (2007) The closure of "A multicriteria lifespan energy efficiency approach to intelligent building assessment". Energy and Buildings, 39 (4). pp. 506-507. ISSN 0378-7788 doi: 10.1016/j.enbuild.2007.01.002

Cho, Y. and Awbi, H. B. (2007) A study of the effect of heat source location in a ventilated room using multiple regression analysis. Building and Environment, 42 (5). pp. 2072-2082. ISSN 0360-1323 doi: 10.1016/j.buildenv.2006.03.008

Clements-Croome, D., Wu, S. and John, G. (2007) High-quality building services based on whole-life value. University of Reading, pp55. ISBN 9780704998865

Clements-Croome, D.J. (2007) Challenges and opportunities for intelligent buildings in the 21st Century. Magyar Epületgépészet, 3 (11). doi: 10.1049/ic.2009.0222

Clifford, C., Elmualim, A. A. and Child, F. (2007) Current challenges and novel solutions in workspace management at Nationwide Building Society. In: BIFM Annual Conference, Keble College, Oxford.

Clifford, C., Elmualim, A. A. and Child, F. (2007) Pervasive technologies for workspace management at Nationwide Building Society. In: CIB World Building Congress: Construction for Development, Cape Town, South Africa, pp. 755-767.

Dainty, A., Green, S. and Bagilhole, B., eds. (2007) People and culture in construction: A Reader. Spon, London. ISBN 9780415348706

Dainty, A., Green, S. and Bagilhole, B. (2007) People and culture in construction: Contexts and challenges. In: Dainty, A., Green, S. and Bagilhole, B. (eds.) People and Culture in Construction: a Reader. Spon, London, pp. 3-25. ISBN 9780415348706

Dunn, P.D., Burton, J.D., Xu, X. and Atkins, A. G. (2007) Paths swept out by initially slack flexible wires when cutting soft soliods; when passing through a very viscous medium; and during regelation. Proceedings of the Royal Society A, 463. pp. 1-20. ISSN 01364-502

Elmualim, A. A. (2007) Building performance measurements and the new paradigm of FM integration. In: International Networking for Young Scientists: Policy Issues of Sustainable Built Environment Research, The British Council Hong Kong and Hong Kong Polytechnic University, Hong Kong.

Elmualim, A. A. (2007) Psycho-social approach for discerning the dichotomy of competition and collaboration to advance mutualistic relationships in construction. In: CME25: Construction Management and Economics: past, present and the future, University of Reading, Reading, UK.

Elmualim, A. A. (2007) The sustainability debate within the UK and beyond. In: International Networking for Young Scientists: Policy Issues of Sustainable Built Environment Research, The British Council Hong Kong and Hong Kong Polytechnic University, Hong Kong.

Ewenstein, B. and Whyte, J. (2007) Beyond words: Aesthetic knowledge and knowing in design. Organization Studies, 28 (5). pp. 689-708. ISSN 0170-8406 doi: 10.1177/0170840607078080

Ewenstein, B. and Whyte, J. K. (2007) Visual representations as 'artifacts of knowing'. Building Research and Information, 35 (1 (Special Issue: Visual Practices: Images of Knowledge Work)). pp. 81-89. ISSN 0961-3218 doi: 10.1080/09613210600950377

Flanagan, R. (2007) An African perspective on changes influencing the construction sector. In: CIDB Annual Conference, University of Stellenbosch and CIDB South Africa..

Flanagan, R. (2007) Competitiveness of Nordic construction enterprises. In: Nordic Conference in construction economics and organisation, University of Technology, Lulea, p. 10.

Flanagan, R. (2007) Creating competitive advantage for the engineering sector. In: Proceedings of Annual Conference of the New Zealand Association of Consulting Engineers, Napier.

Flanagan, R. (2007) Drivers and issues for the Hong Kong construction sector. In: UNSPECIFIED, Hong Kong.

Flanagan, R. (2007) Internationalisation of the Chinese construction sector. In: UNSPECIFIED, Chongqing University.

Flanagan, R. (2007) Trends shaping the construction sector. In: Innovations in Structural Engineering and Construction, The Netherlands, p. 1588.

Flanagan, R. (2007) Vision 2020 for procurement in the construction sector. CIDB Malaysia, Malaysian Association of Engineers, Kuala Lumpur, Malaysia.

Flanagan, R. (2007) The drivers and issues shaping the construction sector. In: Innovations in structural engineering and construction, Melbourne, Australia, pp. 3-13.

Flanagan, R., Lu, W., Shen, L. and Jewell, C.A. (2007) Competitiveness in construction: a critical review of research. Construction Management and Economics, 25 (9). pp. 989-1000. ISSN 0144-6193 doi: 10.1080/01446190701258039

Goodacre, K., McCreadie, C., Flanagan, S. and Lansley, P. (2007) Enabling older people to stay at home: How adaptable are existing properties? British Journal of Occupational Therapy, 70 (1). pp. 5-15. ISSN 0308-0226

Goodier, C.I., Soetanto, R., Dainty, A. R.J., Larsen, G.D. and Quigley, M. (2007) Towards sustained competitiveness in UK construction: A multi-methodological approach. In: Proc of CIB World Building Congress: Construction for Development, Cape Town, pp. 915-927.

Gray, C. (2007) The I-WASP Generation. Building (8).

Gray, C. and Al Bizri, S. (2007) Modelling trade contractor information production. Architectural Engineering and Design Management, 3 (1). pp. 39-48. ISSN 1745-2007

Gray, C. and Al-Bizri, S. (2007) Modelling trade contractor information production. Architectural Engineering and Design Management, 3 (1). pp. 39-48. ISSN 1745-2007

Gray, C. and Davies, R.J. (2007) Perspectives on experiences of innovation: the development of an assessment methodology appropriate to construction project organizations. Construction Management and Economics, 25 (12). pp. 1251-1268. ISSN 0144-6193 doi: 10.1080/01446190701573692

Gray, C., Al-Bizri, S. and Atkin, B. L. (2007) Web supported process management to achieve consistent international project team integration and performance. In: CIB World Congress, Cape Town, South Africa, pp. 1062-1071.

Green, S. D. and Lui, A. M. M. (2007) Theory and practice in value management: a reply to Ellis et al (2005). Construction Management and Economics, 25 (6). pp. 649-659. ISSN 0144-6193 doi: 10.1080/01446190601161473

Gruneberg, S.L., Hughes, W.P. and Ancell, D.J. (2007) Risk under performance-based contracting in the UK construction sector. Construction Management and Economics , 25 (7). pp. 691-699. ISSN 0144-6193 doi: 10.1080/01446190601164097

Harty, C. (2007) Implementing innovation: Transforming practices and technologies in construction work. In: CIB World Congress, Cape Town, South Africa.

Harty, C. (2007) Objects and subjects: The role of technology in the production of construction practice. In: Managing the construction of buildings, Copenhagen Business School.

Harty, C. and Leiringer, R. (2007) Social science research and construction: Balancing rigour and relevance. In: Construction Management and Economics 25th Anniversary Conference, Reading.

Harty, C., Goodier, C., Soetanto, R., Austin, S., Dainty, A. and Price, A.D.F. (2007) The futures of construction: A critical review of construction future studies. Construction Management and Economics, 25 (5). pp. 477-493. ISSN 0144-6193 doi: 10.1080/01446190600879117

Hillig, J.-B. and Hughes, W.P. (2007) A look back to … 2007. RICS Construction Journal, June. pp. 22-23.

Hillig, J.B. (2007) The contractor's quality obligations: different concepts under English and German contract law. In: Proceedings CIB World Construction Congress: Construction for Development, Cape Town, South Africa, pp. 2169-2181.

Hou, J. P., Cherruault, J. Y., Nairne, I., Jeronimidis, G. and Mayer, R. M. (2007) Evolution of the eye-end design of a composite leaf spring for heavy axle loads. Composite Structures, 78 (3). pp. 351-358. ISSN 0263-8223 doi: 10.1016/j.compstruct.2005.10.008

Hughes, W. P., Yohannes, I. and Hillig, J.-B. (2007) Incentives in construction contracts: Should we pay for performance? In: Procs of CIB World Building Congress: Construction for development: Document Transformation Technologies, Cape Town, South Africa, pp. 2272-2283.

Hughes, W.P. (2007) The future for construction professionals in Australia. Take 5. pp. 143-160.

Humphries, S., Bonser, R. H. C., Witton, M. P. and Martill, D. M. (2007) Did pterosaurs feed by skimming? Physical modelling and anatomical evaluation of an unusual feeding method. PLoS Biology, 5 (8). pp. 1647-1655. ISSN 1544-9173 doi: 10.1371/journal.pbio.0050204

Jewell, C.A., Flanagan, R. and Lu, W. (2007) Measuring competitiveness in the construction sector: a new perspective. In: CME 25 Conference, Reading, UK.

Jiang, D., Bibas, A., Santuli, C., Donnelly, N., Jeronimidis, G. and O'Connor, A. F. (2007) Equivalent noise level generated by drilling onto the ossicular chain as measured by laser Doppler vibrometry: A temporal bone study. Laryngoscope, 117 (6). pp. 1040-1045. ISSN 0023-852X doi: 10.1097/MLG.0b013e3180459a10

Kao, C.C. and Larsen, G.D.. (2007) Competitiveness and procurement strategy: A client-contractor partnership. In: Proc of CIB W92 Symposium: Building Across Borders, Hunter Valley, Australia, pp. 335-343.

Karimipanah, T., Awbi, H.B., Sandberg, M. and Blomqvist, C. (2007) Investigation of air quality, comfort parameters and effectiveness for two floor-level air supply systems in classrooms. Building and Environment, 42 (2). pp. 647-655. ISSN 0360-1323 doi: 10.1016/j.buildenv.2005.10.016

Klemeš, J., Bulatov, I. and Cockerill, T. (2007) Techno-economic modelling and cost functions of CO2 capture processes. Computers & Chemical Engineering, 31 (5/6 (Special Issue: ESCAPE-15 - Selected Papers from the 15th European Symposium on Computer Aided Process Engineering held in Barcelona, Spain, May 29-June 1, 2005)). pp. 445-455. ISSN 0098-1354 doi: 10.1016/j.compchemeng.2006.06.002

Kwawu, W. and Hughes, W.P. (2007) Are relational and formal contracts implemented as substitutes in the UK construction industry? In: 23rd Annual ARCOM Conference, Belfast, UK, pp. 97-106.

Lansley, P. (2007) Ageing research on the move, realities of action: Research into action. In: BSG Annual Conference, Sheffield.

Lansley, P. (2007) Growing older but staying put. In: FICCDAT, Caregiving, Disability, Aging and Technology, Toronto.

Lansley, P. (2007) Making sense of research quality assessment. Engineering, Construction and Architectural Management, 14 (1). pp. 7-25. ISSN 0969-9988 doi: 10.1108/09699980710716954

Lansley, P. and Smith, V. (2007) Building capacity for ageing and disability-related research. In: Include 2007: designing with people- An international conference on inclusive design, Royal College of Art, London, p. 5.

Lansley, P. and Smith, V. (2007) Stimulating ageing research from the bottom up. In: FICCDAT, Caregiving, Disability, Aging and Technology, Toronto.

Larsen, G. D., Green, S. D. and Kao, C. C. (2007) Clients and contractors: Relationships in developing new procurement. In: Proc. CIB WO92 Conference on Procurement Systems, Newcastle, Australia.

Larsen, G. D., Green, S. D. and Kao, C. C. (2007) Constructing strategy: Practitioners, practices, and practice. In: CIB World Building Congress: Construction for Development, Cape Town, South Africa, pp. 524-535.

Laryea, S., Badu, E. and Hughes, W.P. (2007) The price of risk in construction projects: Choosing of an appropriate research methodology. In: CIB World Building Congress: Construction for Development, Cape Town, South Africa, pp. 51-62.

Leiringer, R. and Green, S.D. (2007) The substantive and symbolic management of legitimacy in PFI procurement. In: CIB W092: Interdisciplinarity in Built Environment Procurement conference, NSW, Australia, pp. 54-63.

Leiringer, R., Green, S.D. and Raja, J. (2007) Integrated solutions in construction: combining products and services in the PFI context. In: CIB World Construction Congress: Construction for Development, Cape Town, South Africa.

Leiringer, R., Green, S.D. and Raja, J. (2007) Context and contestation: the enactment of product-service business models across organisational arenas. In: KIM project conference, Loughborough University, Loughborough.

Li, Q., Ballal, T., Elhag, T. and Liyanage, C. (2007) Procurement for innovation: a theoretical proposition for enabling innovation diffusion in PFI projects. In: CIB W092: Interdisciplinarity in Built Environment Procurement conference, NSW, Australia.

Liang, J., Li, B. Z., Wu, Y. and Yao, R. M. (2007) An investigation of the existing situation and trends in building energy efficiency management in China. Energy and Buildings, 39 (10). pp. 1098-1106. ISSN 0378-7788 doi: 10.1016/j.enbuild.2006.12.002

Liu, M., Li, B. Z. and Yao, R. M. (2007) Building operational energy consumption of Chongqing and its exergy assessment. Journal of Central South University of Technology, 14. pp. 186-190. ISSN 1005-9784 doi: 10.1007/s11771-007-0391-7

Lu, W., Flanagan, R., Pekericli, M.K. and Jewell, C.A. (2007) From situation analysis to decision options: An improved SWOT approach. In: CME 25 Conference, Reading, UK.

Lu, W., Yohannes, I., Pekericli, M.K. and Hillig, J.-B. (2007) Incentives to overcome barriers to information/knowledge sharing in construction. In: KIM Conference, Loughborough.

Luck, R. (2007) Learning to talk to users in participatory design situations. Design Studies, 28 (3). pp. 217-242. ISSN 0142-694X doi: 10.1016/j.destud.2007.02.002 (special issue 'Participatory Design')

Luck, R. (2007) Using artefacts to mediate understanding in design conversations. Building Research and Information, 35 (Special Issue 1- Visual practices: images of knowledge work). pp. 28-41. ISSN 0961-3218 doi: 10.1080/09613210600879949

Ludlow, G. and Elmualim, A.A. (2007) Future tools for sustainable facilities management. In: BIFM Annual Conference: Shaping the future - the next five years, Keble College, Oxford.

Ludlow, G. and Elmualim, A.A. (2007) Sustainable facilities management round table workshop. In: BIFM Annual Conference: Shaping the future - the next five years, Keble College, Oxford.

Mahyuddin, N. and Awbi, H. B. (2007) Developing a method to characterize indoor environmental parameters in naturally ventilated classrooms. In: Braganca, L., Pinheiro, M., Jalali, S., Mateus, R., Amoeda, R. and Guedes, M. C. (eds.) Portugal Sb07 - Sustainable Construction, Materials and Practices: Challenge of the Industry for the New Millennium, Pts 1 and 2. I O S Press, Amsterdam, pp. 411-417. ISBN 9781586037857

Mao, W., Clements-Croome, D. and Mao, L. (2007) A sense diary system for intelligent buildings. In: Proc of Clima 2007 WellBeing Indoors, Helsinki.

Ndekugri, I., Smith, N. and Hughes, W.P. (2007) The engineer under FDIC's conditions of contract for construction. Construction Management and Economics, 25 (7). pp. 791-799. ISSN 0144-6193 doi: 10.1080/01446190701411216

Nielsen, P.V., Allard, F., Awbi, H.B., Davidson, L. and Schälin, A. (2007) Computational fluid dynamics in ventilation design. REHVA Guide Book 10. RHEVA (Federation of European Heating and Air-Conditioning Association), Brussels. ISBN 9782960046892

Noy, P., Liu, K. and Clements-Croome, D. (2007) Using semiotics to understand the interplay between people and buildings. In: Proc of Clima 2007 WellBeing Indoors, Helsinki.

Pekericli, M.K., Lu, W., Flanagan, R. and Jewell, C.A. (2007) A review of decision theory and decision support systems. In: KIM Conference, Loughborough.

Santulli, C. (2007) Impact properties of glass/plant fibre hybrid laminates. Journal of Materials Science, 42 (11). pp. 3699-3707. ISSN 0022-2461 doi: 10.1007/s10853-006-0662-y

Shen, L., Bao, H., Wu, Y. and Lu, W. (2007) Using bargaining-game theory for negotiating concession period for BOT-type contract. Journal of Construction and Engineering Management, 133 (5). pp. 385-392. ISSN 0733-9364 doi: 10.1061/(ASCE)0733-9364(2007)133:5(385)

Shipworth, D. (2007) Forum - The Stern review: implications for construction. Building Research and Information, 35 (4 (Special Issue: Climate Change: National Building Stocks)). pp. 478-484. ISSN 0961-3218 doi: 10.1080/09613210701330123

Shipworth, D. (2007) Truth in complex adaptive systems models should be based on truth by constructive verification. In: Aerts, D., Edmonds, B. and Gershenson, C. (eds.) Worldviews, Science and Us: Philosophy and Complexity. World Scientific, New York, pp. 141-155. ISBN 9789812705488 9789812707420 (ebook)

Shipworth, M. (2007) Changes in English home heating practices from 1984 to 2007: empirical data from a replication survey. In: The 7th biennial conference on Environmental Psychology, Bayreuth, Germany.

Tamás, G., Clements-Croome, D. and Wu, S. (2007) The use of wireless data communication and body sensing devices to evaluate occupants' comfort in buildings. In: Clima 2007 WellBeing Indoors, Helsinki.

Turner, W. and Awbi, H. (2007) Hybrid ventilation for cooling application. In: ROOMVENT 2007, Helsinki.

Täube, F.A. and Whyte, J.K. (2007) Technology sourcing, knowledge management and governance in international inter-organizational innovation networks. In: DRUID - Summer Conference 2007 on appropriability, proximity, routines and innovation.

Whyte, J. (2007) Evolutionary theories and design practices. Design Issues, 23 (2). pp. 46-54. ISSN 0747-9360 doi: 10.1162/desi.2007.23.2.46

Whyte, J. and Hargadon, A. (2007) Technological change as a process of inquiry: re-imagining glass as a structural material. In: Managing the Construction of Buildings, Copenhagen, Denmark.

Whyte, J., Ewenstein, B.E., Hales, M. and Tidd, J. (2007) Visual practices in two contrasting design settings. In: Managing the Construction of Buildings, Copenhagen, Denmark.

Whyte, J.K. (2007) Book review: The Oxford handbook of innovation management edited by Jan Fagerberg, David C. Mowery and Richard R. Nelson. Organization Studies, 28 (4). pp. 589-593.

Whyte, J.K., Ewenstein, B., Hales, M. and Tidd, J. (2007) Visual practices and the objects of design. Building Research and Information, 35 (1 Special Issue: Visual Practices: Images of Knowledge Work ). pp. 18-27. ISSN 0961-3218 doi: 10.1080/09613210601036697

Whyte, J.K., Ewenstein, B.E., Hales, M. and Tidd, J. (2007) Knowledge and innovation through visual practices. In: EGOS 2007: Dances of Individuals and Organization, Vienna, Austria.

Wu, S. M. and Li, H. Q. (2007) Warranty cost analysis for products with a dormant state. European Journal of Operational Research, 182 (3). pp. 1285-1293. ISSN 0377-2217 doi: 10.1016/j.ejor.2006.09.056

Wu, S. and Clements-Croome, D. (2007) Burn-in policies for products having dormant states. Reliability Engineering & System Safety, 92 (3). pp. 278-285. ISSN 0951-8320 doi: 10.1016/j.ress.2006.04.003

Wu, S. and Clements-Croome, D. (2007) Estimating the relationship among occupant behaviours and indoor environmental parameters using Bayesian networks. In: Clima 2007 Wellbeing Indoors, Helsinki.

Wu, S. and Clements-Croome, D. (2007) Understanding the indoor environment through mining sensory data - A case study. Energy and Buildings, 39 (11). pp. 1183-1191. ISSN 0378-7788 doi: 10.1016/j.enbuild.2006.07.011

Yong, C.Y., Qiao, B., Wilson, D.J., Wu, M., Clements-Croome, D.J., Liu, K., Egan, R. and Guy, C.G. (2007) Coordinated management of intelligent pervasive spaces. In: Proc of the 5th IEEE International Conference on Industrial Informatics (INDIN), Vienna, Austria. doi: 10.1109/INDIN.2007.4384813

2006

Alnaser, W. E., Probert, S. D., El-Masri, S., Al-Khalifa, S. E., Flanagan, R. and Alnaser, N. W. (2006) Bahrain's Formula-1 racing circuit: energy and environmental considerations. Applied Energy, 83 (4). pp. 352-370. ISSN 0306-2619 doi: 10.1016/j.apenergy.2005.04.006

Atkins, A.G. (2006) Toughness & oblique metalcutting. Trans Am Soc Mech Engrs (J Manuf Sci& Engr), 128 (3). pp. 775-786. ISSN 0097-6822 doi: 10.1115/1.2164506

Bahaj, A.S., James, P.A.B., Jentsch, M.F., Clements-Croome, D.J., Chen, Z., Wu, S., Liu, K., Noy, P., Jones, K., Cooper, J. and Kaluarachchi, Y. (2006) Sustainable refurbishment: quantifying the impact of façade changes in multi-storey, multi-occupancy buildings. In: World Renewable Energy Congress IX and Exhibition, University of Florence, Florence, Italy.

Ballal, T. M. A. and Elhag, T. M. S. (2006) Knowledge management systems: their benefits and obstacles from an industry's perspective. In: 2nd Specialty Conference in Leadership and Management in Construction, Grand Bahama Island, Bahamas, pp. 83-91.

Bonser, R.H.C. (2006) Patented biologically-inspired technological innovations: A twenty year view. Journal of Bionic Engineering, 3 (1). pp. 39-41. ISSN 1672-6529 doi: 10.1016/S1672-6529(06)60005-X

Cardellino, P. and Finch, E. (2006) Evidence of systematic approaches to innovation in facilities management. Journal of Facilities Management, 4 (3). ISSN 1472-5967 doi: 10.1108/14725960610673742

Cardellino, P. and Finch, E. (2006) Mapping IT innovation in Facilities Management. Electronic Journal of Information Technology in Construction, 11 (Special Issue: IT in Facility Management). pp. 673-684.

Chen, Z. and Li, H. (2006) Discussion of “Risks in Chinese construction market—contractors' perspective” by Dongping Fang, Mingen Li, Patrick Sik-wah Fong, and Liyin Shen. Journal of Construction and Engineering Management, 132 (3). pp. 327-328. ISSN 0733-9364 doi: 10.1061/(ASCE)0733-9364(2006)132:3(327)

Chen, Z. and Li, H. (2006) Environmental management in construction. Spon Press, London and New York, pp211. ISBN 9780415370554

Chen, Z., Clements-Croome, D., Hong, J., Li, H. and Xu, Q. (2006) A multicriteria lifespan energy efficiency approach to intelligent building assessment. Energy and Buildings, 38 (5). pp. 393-409. ISSN 0378-7788 doi: 10.1016/j.enbuild.2005.08.001

Chen, Z., Hong, J., Li, H. and Zu, Q. (2006) A case study of intelligent buildings: Manchester stadium. In: Proceedings of the Sixth International Conference for Enhanced Building Operations: Intelligent Stadia and Sports Buildings, Shenzhen, China.

Chen, Z., Li, H. and Baldwin, A. N. (2006) Discussion of "Waste-based management in residential construction" by Jing Zhang, Danelle L. Eastham, and Leonhard E. Bernold. Journal of Construction and Engineering Management, 132 (9). p. 1019. ISSN 0733-9364 doi: 10.1061/(asce)0733-9364(2005)131:4(423)

Chen, Z., Li, H., Fan, L.C.N. and Xu, Q. (2006) Environmental ethics and key performance management in China. The Construction Information Quarterly, 8 (1). pp. 77-84. ISSN 1469-4891

Chen, Z., Li, H., Kong, S. C. W., Hong, J. and Xu, Q. (2006) E-commerce system simulation for construction and demolition waste exchange. Automation in Construction, 15 (6). pp. 706-718. ISSN 0926-5805 doi: 10.1016/j.autcon.2005.09.003

Chen, Z., Li, H., Kong, S.C.W. and Xu, Q. (2006) An analytic knowledge network process for construction entrepreneurship education. Journal of Management Development, 25 (1). pp. 11-27. ISSN 0262-1711 doi: 10.1108/02621710610637936

Chen, Z., Li, H., Kong, S.C.W., Hong, J. and Xu, Q. (2006) Process simulation for e-commerce systems: a case study of a sustainable construction industry. In: Khosrow-Pour, M. (ed.) Encyclopedia of E-Commerce, E-Government and Mobile Commerce. Information Resources Management Association, USA, Hershey, pp. 933-940. ISBN 9781591407997

Chung, J.K.H., Shen, G., Kumaraswamy, M.M., Ekambaram, P. and Chen, Z. (2006) A value framework for contractor selection. In: 8th International Value Management Conference & Inaugural Asia Pacific Value Convention, Hong Kong, pp. 396-306.

Chung, J.K.H., Shen, G.Q.P. and Chen, Z. (2006) The use of information technology by the quantity surveying professionals in Hong Kong. International Journal of Project Management, 25 (2). pp. 134-142. ISSN 0263-7863 doi: 10.1016/j.ijproman.2006.09.005

Clements-Croome, D. (2006) Challenges and opportunities for intelligent buildings in the 21(st) century. In: Hao, J. P., He, J. J. and Fan, K. X. (eds.) 2006 Xi'an International Conference of Architecture and Technology, Proceedings - Architecture in Harmony. China Architecture & Building Press, Beijing, pp. 884-897. ISBN 978711200507-9

Clements-Croome, D. (2006) Creating the productive workplace. Taylor & Francis, pp424. ISBN 9780415351386

Clements-Croome, D. (2006) Green intelligent buildings: An energy focus. In: Second International Intelligent, Green and Energy Efficient Building and Technologies and Products Conference, Beijing, pp. 397-415.

Clements-Croome, D.J., Wu, M. and Li, S.R. (2006) A sensor based intelligent building assessment model. In: Chinese Research Institute of Construction Management 2006 Annual Conference, Beijing, China, pp. 91-99.

Cockerill, T.T., Klemes, J. and Bulatov, I. (2006) A model for the whole-system assessment of Carbon Dioxide Capture and Storage options for deployment in the UK. In: Eighth Greenhouse Gas Abatement Technologies Conference (GHGT-8), Trondheim, Norway.

Croome, D. C., Wu, M. and Li, S. R. (2006) A sensor based intelligent building assessment model. In: Zhao, Z. Y., Yu, M. X., Feng, C. C. and Duan, L. L. (eds.) Proceedings of CRIOCM 2006 International Research Symposium on Advancement of Construction Management and Real Estate, Vols 1 and 2. Hong Kong Polytechnic Univ, Kowloon, pp. 91-99. ISBN 9623675364

Czaban, L. and Li, Q. (2006) Why does home country influence disappear in international business research?- the evidence from distribution channel management in foreign companies in China. In: Asia Academy of Management 5th Conference, Tokyo.

Davies, R. (2006) Talking about construction innovation. In: 22nd Annual ARCOM Conference, Birmingham, UK, pp. 771-780.

Elmualim, A. A. (2006) Dynamic modelling of a wind catcher/tower turret for natural ventilation. Building Services Engineering Research & Technology, 27 (3). pp. 165-182. ISSN 0143-6244 doi: 10.1191/0143624406bse159oa

Elmualim, A. A. (2006) Effect of damper and heat source on wind catcher natural ventilation performance. Energy and Buildings, 38 (8). pp. 939-948. ISSN 0378-7788 doi: 10.1016/j.enbuild.2005.11.004

Elmualim, A. A. (2006) Verification of design calculations of a wind catcher/tower natural ventilation system with performance testing in real building. International Journal of Ventilation, 4 (4). pp. 393-404. ISSN 1473-3315

Elmualim, A.A. (2006) Failure of a control strategy for a hybrid air-conditioning and wind catchers/towers system at Bluewater shopping malls in Kent. Facilities, 24 (11/12 (Special Issue: Indoor Air Quality)). pp. 399-411. ISSN 0263-2772 doi: 10.1108/02632770610684882

Elmualim, A.A. and Govender, K. (2006) The application of Communities of Practice (CoP) in UK large contacting companies. In: ASCE and CIB 2nd Specialty Conference on Leadership and Management in Construction and Engineering "International Perspective", Grand Bahama Island, Bahamas, pp. 234-241.

Elmualim, A.A. and Zhang, Y. (2006) Editorial: Modelling, assessment and control of indoor air quality for FM professionals. Facilities, 24 (11/12 (Special Issue: Indoor Air Quality)). ISSN 0263-2772

Elmualim, A.A., Green, S.D., Larsen, G. and Kao, C.C. (2006) The discourse of construction competitiveness: Material consequences and localised resistance. In: Joint International Conference on Construction Culture, Innovation and Management (CCIM), Dubai.

Fernie, S., Leiringer, R. and Thorpe, T. (2006) Change in construction: a critical perspective. Building Research and Information, 34 (2). pp. 91-103. ISSN 0961-3218 doi: 10.1080/09613210500491639

Goodman, T., Gibbs, D. and Cook, G. (2006) Better lighting for improved human performance, health and well being and increased energy efficiency – A scoping study for CIE-UK. National Physical Laboratory, HMSO, London.

Gough, C., Shackley, S., Holloway, S., Cockerill, T.T., Bentham, M., Bulatov, I., McLachlan, C. and Klemes, J. (2006) An integrated assessment of carbon dioxide capture and storage in the UK. In: Eighth Greenhouse Gas Abatement Technologies Conference (GHGT-8), Trondheim.

Gray, C. (2006) Design Management – experiences and current practice. In: Seminario Internacional, NTUAU 2006, Inovacoes Technologicas e Sustentabilidade, IV Workshop Brasileiro de Gestao do Process de Projeto na Construcao de Edificios, University of Sao Paulo, Brazil.

Gray, C. and Al Bizri, S. (2006) Developments of QFD to support decision making during the briefing process. In: Joint International Conference on Computing and Decision Making in Civil and Building Engineering, Montreal, Canada, pp. 2771-2780.

Green, S. D. (2006) Discourse and fashion in supply chain management. In: Pryke, S. and Smyth, H. (eds.) The Management of Projects: A Relationship Approach. Wiley-Blackwell, Oxford, 289- 308. ISBN 9781405124317

Green, S. D. (2006) The management of projects in the construction industry: Context, discourse and self-identity. In: Hodgson, D. and Cicmil, S. (eds.) Making Projects Critical. Palgrave, pp. 232-251. ISBN 9781403940858

Green, S.D. and Leiringer, R. (2006) FM integration: knowledge management throughout the project life-cycle - A Grand Challenge project. British Institute of Facilities Management (BIFM).

Gruneberg, S. and Hughes, W.P. (2006) Understanding construction consortia: Theory, practice and opinions. RICS Research paper series, 6 (1).

Harty, C. (2006) The role of users and contexts in innovation. In: Construction in the XXI Century: Local and global challenges, Rome, Italy.

Harty, C., Goodier, C., Soetanto, R., Austin, S., Dainty, A., Price, A. and Thorpe, T. (2006) Scenario development: a methodology for aligning contemporary practices with the potential futures of UK construction. In: 22nd Annual ARCOM Conference, Birmingham, UK, pp. 601-610.

Hillebrandt, P.M. (2006) The construction industry and its resources: a research agenda. Journal of Construction in Developing Countries, 11 (1). pp. 37-51. ISSN 1823-6499

Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) Information visualization approach to intelligent buildings assessment. Journal of Harbin Institute of Technology. ISSN 1005-9113

Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) A data and knowledge management system for intelligent buildings. In: 6th International Conference for Enhanced Building Operations, Shenzhen, China.

Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) A decision-making model for the Asian Intelligent Building Index. Journal of Harbin Institute of Technology. ISSN 1005-9113

Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) A decision-making model for the Asian Intelligent Building Index. In: 6th International Conference for Enhanced Building Operations, Shenzhen, China.

Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) An integrative methodology of intelligent buildings assessment. In: 2nd International Conference on Intelligent Green and Energy Efficient Buildings, Beijing, China.

Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) A review of quantitative approaches to intelligent buildings assessment. In: 6th International Conference for Enhanced Building Operations, Shenzhen, China.

Hong, J., Chen, Z., Li, H., Clements-Croome, D.J. and Xu, Q. (2006) A knowledgebase for the study of intelligent buildings. In: Bear 2006: Construction Sustainability and Innovation, Shangri-la Hotel, Kowloon, Hong Kong.

Hughes, W. (2006) Contract management. In: Lowe, D. and Leiringer, R. (eds.) Comercial management of projects: defining the discipline. Wiley-Blackwell, London, pp. 344-355. ISBN 9781405124508

Hughes, W. (2006) Keynote paper: The impact of on-line manuscript management on the management of a peer-reviewed journal. In: Procs International CIB Symposium: Construction in the 21st Century - Local and Global Challenge, Rome, Italy.

Hughes, W., Hillebrandt, P.M., Greenwood, D. and Kwawu, W. (2006) Procurement in the construction industry. Taylor and Francis, pp224. ISBN 9780415395601

Jewell, C.A. (2006) Informal employment - a threat or an opportunity for the UK construction sector? In: 22nd Annual ARCOM Conference, Birmingham.

Jewell, C.A. (2006) Informal employment in the construction sector - a review of its effects. In: Construction in the XXI Century: Local and global challenges, Rome, Italy.

Kao, C.-C. , Green, S.D., Larsen, G.D. and Elmualim, A.A. (2006) Construction competitiveness: A dynamic capabilities perspective. In: Construction in the XXI Century: Local and global challenges, Rome, Italy.

Klemes, J., Bulatov, I. and Cockerill, T. T. (2006) The engineering feasibility of CCS in the UK. In: Shackley, S. (ed.) Carbon Capture and its Storage. Ashgate, pp. 43-87. ISBN 9780754644996

Langston, C. and Wu, M. (2006) A comparative study of construction industry size and structure between the UK and Australia and the significance of industry fragmentation. International Journal of Construction Management, 6 (1). pp. 45-61.

Lansley, P. (2006) Capitalising on the potential of assistive technology. British Journal of Occupational Technology, 69 (3). p. 97. ISSN 1477-6006

Lansley, P. (2006) EQUAL: New horizons for ageing research. Quality in Ageing and Older Adults, 7 (1). pp. 6-13. ISSN 1471-7794

Lansley, P. (2006) The benefits of adapting the homes of older people. In: Contemporary Ergonomics 2006. Cambridge, pp. 363-367. ISBN 9780415398183

Lansley, P. and McCreadie, C. (2006) Assistive technology: Benefits to and acceptance by older people. CME Geriatric Medicine, 8 (2). pp. 72-75. ISSN 1475-1453

Larsen, G. D. (2006) Innovation and regulation: A socio-technical perspective. In: BEAR International Conference on Building Education and Research, Hong Kong.

Larsen, G. D., Green, S.D., Kao, C. and Elmualim, A. A. (2006) Sustained competitiveness: Polarized perspectives and the search for the middle ground. In: Construction in the XXI Century: Local and global challenges, Rome, 194-195 (executive) paper on CD Rom.

Larsen, G. D., Kao, C.C., Soetanto, R. and Goodier, C. (2006) Understanding the past, present and future of procurement. In: W92 Conference on Procurement Systems, Salford, pp. 340-347.

Laryea, S. and Hughes, W. (2006) The price of risk in construction projects. In: 22nd Annual ARCOM Conference, Birmingham, UK, pp. 553-561.

Leiringer, R. (2006) Technological innovation in the context of PPPs: incentives, opportunities and actions. Construction Management and Economics, 24 (3). pp. 301-308. ISSN 0144-6193 doi: 10.1080/01446190500435028

Leiringer, R. and Green, S.D. (2006) Products and services: Is there a case for integrated solutions in construction? In: Construction in the XXI Century: Local and global challenges, Rome, Italy.

Liu, G.W., Luo, Q., Shen, Q.P. and Wu, M. (2006) The need for value management in the process of construction project developments in China: A systematic perspective. In: Chinese Research Institute of Construction Management 2006 Annual Conference, Beijing, China, pp. 275-284.

Liu, T. and Wu, M. (2006) Alliance in supply chain management. Journal of Supply Chain Science and Technology (8). pp. 6-9.

Lomas, K., Oreszczyn, T., Shipworth, D., Wright, A.J. and Summerfield, A.J. (2006) Carbon reduction in buildings (CaRB) - Understanding the social and technical factors that influence energy use in UK buildings. In: RICS Annual Conference Cobra 2006, University College, London, p. 14.

Lowe, D. and Leiringer, R., eds. (2006) Commercial management of projects: Defining the discipline. Wiley-Blackwell, London. ISBN 9781405124508

Lowe, D. and Leiringer, R. (2006) Commercial management – defining the discipline? In: Lowe, D. and Leiringer, R. (eds.) Commercial management of projects: Defining the discipline. Wiley-Blackwell, London, pp. 1-17. ISBN 9781405124508

Luck, R. and McDonnell, J. (2006) Architect and user interaction: The spoken representation of form and functional meaning. Design Studies, 27 (2). pp. 141-166. ISSN 0142-694X doi: 10.1016/j.destud.2005.09.001

Muller, U., Gindl, W. and Jeronimidis, G. (2006) Biomechanics of a branch-stem junction in softwood. Trees-Structure and Function, 20 (5). pp. 643-648. ISSN 0931-1890 doi: 10.1007/s00468-006-0079-x

Ndekugri, I., Hughes, W.P. and Smith, N.J. (2006) Dispute boards on international infrastructure projects: Implications for the construction industries in developing countries. In: Procs W107 Construction in developing countries: international symposium on construction in developing economies: new issues and challenges, Santiago, Chile.

Paxton, H., Bonser, R. H. C. and Winwood, K. (2006) Regional variation in the microhardness and mineralization of vertebrae from brown and rainbow trout. Journal of Fish Biology, 68 (2). pp. 481-487. ISSN 0022-1112 doi: 10.1111/j.1095-8649.2006.00926.x

Radosavljevic, M. (2006) The principles of ideactivity. In: Joint International Conference on Computing and Decision Making in Civil and Building Engineering 2006, Montreal, Canada.

Santulli, C. (2006) Post-impact flexural tests on jute/polyester laminates monitored by acoustic emission. Journal of Materials Science, 41 (4). pp. 1255-1259. ISSN 0022-2461 doi: 10.1007/s10853-005-4235-2

Santulli, C. and Jeronimidis, G. (2006) Development of a method fon non-destructive testing of fruits using scanning laser vibrometry (SLV). NDT.net - The e-Journal of Nondestructive Testing, 11 (10). ISSN 1435-4934

Santulli, C., Finn, T. J., Seidel, R. and Jeronimidis, G. (2006) Scanning LDV for vibration measurement of filiform hairs in crickets in response to induced airflow - art. no. 63450E. In: Tomasini, E. P. (ed.) Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications. Proceedings of the Society of Photo-Optical Instrumentation Engineers (Spie), 6345. Spie-Int Soc Optical Engineering, Bellingham, E3450-E3450. ISBN 081946421X doi: 10.1117/12.693153

Shen, L., Lu, W. and Yam, M. (2006) Contractor key competitiveness indicators: A China study. Journal of Construction and Engineering Management, 132 (4). pp. 416-424. ISSN 0733-9364 doi: 10.1061/(ASCE)0733-9364(2006)132:4(416)

Shipworth, D. (2006) Qualitative modelling of sustainable energy scenarios: An application and extension of the Bon Qualitative Input-Output model. Construction Management and Economics, 24 (7 (Special Issue: Festschrift for Ranko Bon )). pp. 695-703. ISSN 0144-6193 doi: 10.1080/01446190600658917

Shirsavar, S. A., Potter, B. A. and Ridge, I. A. L. (2006) Three-phase machines and drives - Equipment for a laboratory-based course. IEEE Transactions on Education, 49 (3). pp. 383-388. ISSN 0018-9359 doi: 10.1109/te.2006.879266

Sun, S., Zhen, Z. and Clements-Croome, D. J. (2006) Planning the sustainable eco-city in Taipei: The implementation of green design and green building schemes. In: Second International Intelligent, Green and Energy Efficient Building and Technologies and Products Conference, British Papers, Beijing, pp. 448-458.

Sun, S.L., Chen, Z. and Clements-Croome, D.J. (2006) Planning the sustainable eco-city in Taipei: the implementation of green design and green building schemes. In: British Papers for IGEBC: the 2nd International Conference on Intelligent Green and Energy Efficient Buildings, Beijing, China.

Sun, S.L., Chen, Z. and Clements-Croome, D.J. (2006) The green building scheme for a sustainable eco-city in Taipei. In: 6th International Conference for Enhanced Building Operations, Shenzhen, China.

Tehranchi, H. and Flanagan, R. (2006) The social and cultural construction of risk. Construction Information Quarterly, 8 (4). pp. 167-172. ISSN 1469-4891

Wargocki, P., Seppänen, O., Andersson, J., Boerstra, A. and Clements-Croome, D. (2006) Indoor climate and productivity in offices: How to integrate productivity in life cycle cost analysis of buildings services. In: REHVA Guide Book No 6. Federation of European Heating and Airconditioning Associations, pp. 1-76. ISBN 2960046854

Watts, B., Howard, S., Markham, L., Elmualim, A.A. and Hutchinson, K. (2006) A framework for UK self sufficiency for food and energy from renewable sources. In: World Renewable Energy Congress IX, Florence, Italy.

Wu, M. (2006) The EOQ-JIT cost indifference point. In: 5th Chinese Supply Chain Management Annual Conference, Wu Han, China, pp. 497-507.

Wu, M. and Dai, X.F. (2006) An investigation: JIT implementation status in the ready-mixed concrete industry. In: Modern Supply Chain Management, Qwenming, P.R. China, pp. 308-312.

Wu, M. and Du, C.L. (2006) Assessing material suppliers using a fuzzy analytical hierarchy process approach. In: Modern Supply Chain Management, Qwenming, P.R. China, pp. 254-259.

Wu, M. and Low, S. P. (2006) JIT purchasing versus EOQ with a price discount: An analytical comparison of inventory costs in the ready mixed-concrete industry. Journal of Building & Construction Management, 10 (1). pp. 28-37.

Wu, M. and Low, S.P. (2006) EOQ, JIT and fixed costs in the Ready-mixed concrete industry. International Journal of Production Economics, 102 (1). pp. 167-180. ISSN 0925-5273 doi: 10.1016/j.ijpe.2005.03.002

Wu, M. and Xu, M.Z. (2006) A model for comparative analysis of inventory costs of JIT and EOQ purchasing in the ready mixed concrete industry. Materials Science Forum, 532-533. pp. 1020-1023. ISSN 1662-9752 doi: 10.4028/www.scientific.net/MSF.532-533.1020

Wu, M. and Zhang, Y.L. (2006) EOQ-JIT cost indifference point in the ready-mixed concrete industry. In: Modern Supply Chain Management, Qwenming, P.R. China, pp. 249-253.

Wu, M., Liu, C.L. and Picken, D. (2006) Discussion of 'modelling a contractor's markup estimation' by Min Liu and Yean Yng Ling. Journal of Construction and Engineering Management, 132 (6). pp. 658-661. ISSN 0733-9364 doi: 10.1061/(ASCE)0733-9364(2005)131:4(391)

Wu, M., Xu, M.Z. and Liu, G.W. (2006) An integrated theory for construction project logistics management. In: Chinese Research Institute of Construction Management 2006 Annual Conference, Beijing, China, pp. 122-127.

Wu, M., Zhang, Y. and Xu, M.Z. (2006) EOQ-JIT cost indifference point under a price discount scheme. In: Logistics Research Network Annual Conference, Newcastle, UK, pp. 512-516.

Wu, M., Zhang, Y. and Xu, M.Z. (2006) The theoretical advantage of JIT purchasing is probably overstated. In: Chinese Research Institute of Construction Management 2006 Annual Conference, Beijing, China, pp. 117-121.

Wu, S. and Clements-Croome, D. J. (2006) Reliability design for building services. In: Second International Intelligent, Green and Energy Efficient Building and Technologies and Products Conference, Beijing, pp. 257-265.

Wu, S., Clements-Croome, D. J., Fairey, V., Neale, K., Albany, B., Sidhu, J. and Desmond, D. (2006) Reliability in the whole life cycle of building systems. Engineering, Construction and Architectural Management, 13 (2). pp. 136-153. ISSN 0969-9988 doi: 10.1108/09699980610659607

Xu, M.Z. and Wu, M. (2006) A cash flow state equation of construction project based on interim payment estimates and its application. In: Chinese Research Institute of Construction Management 2006 Annual Conference, Beijing, China, pp. 219-225.

Xu, M.Z. and Wu, M. (2006) The evaluation of Ro-Ro shipment in Yangtze River and its development policy. In: Logistics Research Network Annual Conference 2006, Newcastle, UK, pp. 517-521.

Xu, M.Z., Liang, Y.X., Wu, M. and Li, S.Y. (2006) The assessment of Ro-Ro shipments in Yangzhu River and the strategy. In: 5th Chinese Supply Chain Management Annual Conference, Wu Han, China.

Yao, R., Steemers, K. and Li, B. (2006) Asia-European sustainable urban development. In: International Conference on Asia-European Sustainable Urban Development.

2005

Ancell, D. (2005) Reducing costs: a practical application of performance-based specification and transaction cost theories. In: ARCOM, School of Oriental and African Studies, London.

Atkins, A.G. (2005) Toughness & cutting: A new way of determining ductile fracture toughness and strength. Engineering Fracture Mechanics, 72 (6). pp. 849-860. ISSN 0013-7944 doi: 10.1016/j.engfracmech.2004.07.014

Atkins, A.G. and Xu, X. (2005) Slicing of soft, flexible solids with industrial applications. International Journal of Mechanical Science, 47 (4-5). pp. 479-492. ISSN 0020-7403 doi: 10.1016/j.ijmecsci.2005.01.013

Avdelidis, N.P., Nelson, L.J. and Almond, D.P. (2005) Quantitative thermal imaging analysis of aircraft materials: through skin sensing (Invited Paper). Thermosense XXVII, 5782. pp. 324-333. doi: 10.1117/12.592437

Awbi, H.B. (2005) Ventilation and air movement in buildings. In: Renewable Energy Seminar, Brighton, UK.

Bakó-Biró, Z. and Olesen, B. W. (2005) Effects of indoor air quality on health, comfort and productivity. Velux Danmark A/S, International Centre for Indoor Environment and Energy (ICIEE), Technical University of Denmark.

Bakó-Biró, Z., Wargocki, P., Wyon, D.P. and Fanger, P.O. (2005) Poor indoor air quality slows down metabolic rate of office workers. In: Indoor Air 2005, Beijing, The 10th International Conference on Indoor Air Quality and Climate, Beijing, China.

Bakó-Biró, Z., Weschler, C.J., Wargocki, P. and Fanger, P.O. (2005) Effects of indoor pollution sources and ventilation rate on ozone's surface removal rate and the occurrence of oxygenated VOCs in an office space. In: Indoor Air 2005 The 10th International Conference on Indoor Air Quality and Climate, Beijing.

Barrett, J. (2005) Support and information needs of older and disabled older people in the UK. Applied Ergonomics, 36 (2). pp. 177-183. ISSN 0003-6870 doi: 10.1016/j.apergo.2004.10.006

Bonello, P., Brennan, M. J., Elliott, S. J., Vincent, J. F. V. and Jeronimidis, G. (2005) Designs for an adaptive tuned vibration absorber with variable shape stiffness element. Proceedings of the Royal Society a-Mathematical Physical and Engineering Sciences, 461 (2064). pp. 3955-3976. ISSN 1364-5021 doi: 10.1098/rspa.2005.1547

Bonser, R.H.C. (2005) Science to get one's teeth into. Journal of Experimental Biology, 208 (17). iv. ISSN 0022-0949 doi: 10.1242/jeb.01801

Bonser, R.H.C. (2005) What is biomimetics? Biological Sciences Review, 17 (4). pp. 21-23.

Bonser, R.H.C. (2005) A design for life. Materials World, 13 (4). p. 21. ISSN 0967-8638

Bradon, J.E. and Chaplin, C.R. (2005) Quantifying the residual creep life of polyester mooring ropes. International Journal of Offshore and Polar Engineering, 15 (3). pp. 223-228. ISSN 1053-5381

Bradon, J.E., Ridge, I.M.L. and Chaplin, C.R. (2005) Modelling the torsional interaction of wire and polyester fibre ropes used for offshore moorings. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment , 219 (4). pp. 163-172. ISSN 2041-3084 doi: 10.1243/14750902JEME35

Cardellino, P. and Finch, E. (2005) The nature of innovation cultures in facilities management. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki.

Carvajal, A. (2005) Quantitative comparison between the use of 3D vs 2D visualization tools to present building design proposals to non-spatial skilled end users. In: Banissi, E., Sarfraz, M., Roberts, J. C., Loften, B., Ursyn, A., Burkhard, R. A., Lee, A. and Andrienko, G. (eds.) Ninth International Conference on Information Visualisation, Proceedings. Ieee Computer Soc, Los Alamitos, pp. 291-294. ISBN 0769523978 doi: ieeecomputersociety.org/10.1109/IV.2005.103

Chaplin, C.R. (2005) Torsional interactions between mooring line components. In: Cordage Institute Annual Technical Meeting, San Antonio, TX, USA. doi: 10.4043/12173-MS

Chaplin, C.R. (2005) The fatigue and degradation mechanisms of hoisting ropes. In: Hoist and Haul, Perth.

Chaplin, R.C. (2005) Deep water mooring: Challenges, solutions and torsion. In: Proceedings Second Internationaler Stuttgarter Seiltag , University of Stuttgart, Germany.

Chen, Z. (2005) A knowledge-driven multicriteria decision support system for intelligent building assessment. In: International Conference on Construction and Real Estate Management, Penang, Malaysia.

Chen, Z. and Clements-Croome, D. J. (2005) A multicriteria approach to intelligent building assessment. Assessment case study session. In: The 2005 World Sustainable Building Conference, Tokyo, Japan.

Chen, Z. and Li, H. (2005) Discussion: ISO 14000 and the construction industry: survey in China. Journal of Management in Engineering, 21 (3). pp. 107-115. ISSN 0733-9364 doi: 10.1061/sASCEd0742-597Xs2003d19:3s107d

Chen, Z. and Li, H. (2005) EnvironalPlanning: an analytical network process model for environmentally conscious construction planning. Journal of Construction and Engineering Management, 131 (1). pp. 92-101. ISSN 0733-9364 doi: 10.1061/(ASCE)0733-9364(2005)131:1(92)

Chen, Z. and Li, H. (2005) A knowledge-driven management approach to environmental-conscious construction. Construction Innovation, 5 (1). pp. 27-39.

Chen, Z., Abdullah, A., Anumba, C., Li, H. and Xu, Q. (2005) Deconstruction plan assessment using multi-criteria decision-making methods. In: Wang, Y. (ed.) Proceedings of 2005 International Conference on Construction & Real Estate Management, Vols 1 and 2 - CHALLENGE OF INNOVATION IN CONSTRUCTION AND REAL ESTATE. China Architecture & Building Press, Beijing, pp. 465-469. ISBN 7112078717

Chen, Z., Abdullah, A., Chimay, A., Li, H. and Xu, Q. (2005) A decision support system for sustainable deconstruction and demolition projects. Computer-Aided Civil and Infrastructure Engineering.

Chen, Z., Bakker, H.C., Kong, S.C.W., Chung, J.K.H., Li, H., Shen, G.Q.P. and Xu, Q. (2005) A remote expert system model for concrete crack diagnosis. In: AEC2005: the 3rd International Conference on Innovation in Architecture, Engineering and Construction, Rotterdam, The Netherlands.

Chen, Z., Clements-Croome, D.J., Hong, J., Li, H., Kaluarachchi, Y., Jones, K.G., James, P.A., Jentsch, M. and Bahaj, A.S. (2005) A façade casebase for teaching and learning intelligent buildings. In: CISBAT 2005, Lausanne, Switzerland.

Chen, Z., Clements-Croome, D.J., Kaluarachchi, Y., Jones, K.G. and Hong, J. (2005) FacadeChoice: a decision-making model for innovation and environmental sustainability in the design and renovation of building envelopes. In: CISBAT 2005, Lausanne, Switzerland.

Chen, Z., Li, H., Khalfan, M. and Kong, S. (2005) GreenPartner: A decision-making model for sustainable partnerships in construction. In: 2nd International SCRI Research Symposium, University of Salford, UK.

Chen, Z., Li, H., Kong, S. and Xu, Q. (2005) A decision support model for partner selection in sustainable construction. In: Bear 2006: Construction Sustainability and Innovation, Hong Kong.

Cherruault, J., Hou, J.P., Jeronimidis, G., Chvojan, J. and Mayer, R.M. (2005) Design, manufacturing, testing and simulation of fibre composite leaf spring for heavy axle loads. In: 15th International Conference on Composite materials (ICCM15), Durban, South Africa.

Cho, Y., Awbi, H.B. and Karimipanah, T. (2005) Comparison between wall confluent jets and displacement ventilation in aspects of the spreading ration on the floor. In: 10th International Conference in Indoor Air Quality and Climate (Indoor Air 2005), Beijing, China.

Clements-Croome, D. J. (2005) Assessing performance of green intelligent buildings. In: 1st International Intelligent & Green Building Technologies and Products Conference and Expo, Beijing.

Clements-Croome, D. J., Awbi, H. B. and Williams, M. (2005) Ventilation rates in schools. In: Yang, X., Zhao, B. and Zhao, R. (eds.) Indoor Air 2005: Proceedings of the 10th International Conference on Indoor Air Quality and Climate, Vols 1-5. Tsinghua University Press, Beijing, pp. 3223-3227. ISBN 9787894948304

Clements-Croome, D.J. (2005) Designing the indoor environment for people. International Journal of Architectural Engineering and Design Management, 1 (1). pp. 45-55. ISSN 1745-2007

Clements-Croome, D.J. (2005) Natural ventilation in non-domestic buildings. In: Application Manual AM10 (Second Edition). Chartered Institution of Building Services Engineers. ISBN 9781903287569

Clements-Croome, D.J., John, G. and Wu, S. (2005) Improving the reliability and value of building services. In: CLIMA 2005, REVHA Workshop, Lausanne, Switzerland.

Cook, G. (2005) Lighting design methods for obstructed interiors. CIE Publication, 161.

Cook, G. (2005) Part 6: Managing inclusive design guide. In: Design Management Systems: Managing inclusive design Guide. BSI British Standards Agency -BS7000-6@2005. ISBN 0580449025

Cook, G. and Bright, K. (2005) Colour and luminance contrast - What, why, how and when? Access Journal 18.

Cook, G., Gillham, S.A. , Webber, G., Le Scouiller, S.A. and Moseley, E. (2005) The legibility and conspicuity of emergency escape route signage for visually impaired people. In: Vision 2005, London.

Cook, G., Yohannes, I., Booy, D., Le Scouiller, S. and O'Neill, L.A. (2005) Lighting the homes of people who are visually impaired. In: Vision 2005, London.

Cook, G., Yohannes, I., Dalke, H. and Camgoz, N. (2005) Lighting multi-modal transport intersections for visually impaired travellers. In: 10th European Lighting Conference on Lighting for Humans, LUX EUROPA 2005, Berlin, Germany.

Cook, G.K., Yohannes, I., Booy, D.A. and Le Scouiller, S.A. (2005) Lighting homes of people who are visually impaired. In: Include 2005, Royal College of Art, London.

Cotterell, B., Pardoen, T. and Atkins, A. G. (2005) Measuring toughness and the cohesive stress-displacement relationship by the essential work of fracture concept. Engineering Fracture Mechanics, 72 (6). pp. 827-848. ISSN 0013-7944 doi: 10.1016/j.engfracmech.2004.10.002

Cotton, J.R., Winwood, K., Zioupos, P. and Taylor, M. (2005) Damage rate is a predictor of fatigue life and creep strain rate in fatigue of tensile human cortical bone samples. Journal of Biomechanical Engineering, 127 (2). pp. 213-210. ISSN 0148-0731 doi: 10.1115/1.1865188

Dalke, H., Camgoz, N., Cook, G., Yohannes, I. and Bright, K. (2005) Inclusive transport environments: colour design and visual impairment. In: Include 2005, Royal College of Art, London.

Elhag, T.M.S., Boussabaine, A.H. and Ballal, T.M.A. (2005) Criticial determinants of construction tendering costs: Quantity surveyors' standpoint. International Journal of Project Management, 23 (7). pp. 538-545. ISSN 0263-7863 doi: 10.1016/j.ijproman.2005.04.002

Elmualim, A. (2005) Development of a hybrid wind catcher/tower and heat convector for heating naturally ventilated spaces. In: Sustainable Building South East Asia, Kuala Lumpur, Malaysia.

Elmualim, A. (2005) Towards integrative hybrid low energy and renewable energy systems in buildings. In: World Renewable Energy Congress 2005- Innovation in Europe, Aberdeen.

Elmualim, A., Fernie, S. and Green, S.D. (2005) Learning from use 1: Harnessing the role of FM in the design processes through post-occupancy evaluation studies. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki.

Ericsson, S., Henricsson, P. and Jewell, C. (2005) Understanding construction competitiveness: the initial results of a Delphi survey in Finland, Sweden and the UK. In: QUT Research Week 2005, Brisbane.

Ericsson, S., Henricsson, P. and Jewell, C. (2005) The construction competitiveness hexagon: A framework explaining construction industry competitiveness. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki.

Flanagan, R. (2005) Malaysia in the global construction market - a focus on sustaining competitiveness. In: International Conference of the Construction Industry Development Board, Malaysia, Kuala Lumpur, Malaysia.

Flanagan, R. (2005) The synergy between business and global drivers in futures planning for construction enterprises. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki.

Flanagan, R. and Jewell, C. (2005) Whole life appraisal for construction. Blackwell Publishing, Oxford, pp182. ISBN 9780632050468

Flanagan, R. and Jewell, C.A. (2005) International competitiveness of the Finnish construction sector. TEKES (Finnish Research Council)

Flanagan, S.C. (2005) Obtaining guidance. In: Bright, K. (ed.) Disability: Making Buildings Accessible Special Report, 2003. Workplace Law Network, pp. 147-151. ISBN 1900648482

Gough, C., Shackley, S., Holloway, S., Cockerill, T.T., Bentham, M., Bulatov, I., McLachlan, C. and Klemes, J. (2005) An integrated assessment of carbon dioxide capture and storage in the UK. Report. Tyndall Centre

Gray, C. (2005) Performance based specifications for the built environment (domain 4 report) - PeBBu project. CIB, Rotterdam. pp78.

Gray, C. and Al Bizri, S. (2005) Construction engineering design is an element-constraint-element network of information exchange. In: CIB W096 Architectural Management Special Meeting Designing Value: New Directions In Architectural Management, Technical University Of Denmark, Lyngby, Denmark.

Green, S. D. and May, S. C. (2005) Lean construction: Arenas of enactment, models of diffusion and the meaning of 'leanness'. Building Research and Information, 33 (6). pp. 498-511. ISSN 0961-3218 doi: 10.1080/09613210500285106

Green, S. and Leiringer, R. (2005) The changing procurement landscape requires thought leadership in value management. Value Magazine, 14 (3). pp. 12-15.

Green, S.D. (2005) Leadership is the way forward. Construction news. pp. 24-25.

Green, S.D., Fernie, S. and Weller, S. (2005) Making sense of supply chain management: acomparative study of aerospace and construction. Construction Management and Economics, 23 (6). pp. 579-593. ISSN 0144-6193 doi: 10.1080/01446190500126882

Gruneberg, S. (2005) Migrant construction workers before and after EU Expansion: Report on a seminar held at the University of Reading, 26th November 2004. Construction Labour Review, 4. pp. 52-4.

Gruneberg, S. (2005) Output differences of specialist firms in the UK building industry. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki.

Gruneberg, S. (2005) Review: Peter Reed, "Railtracks in the Sky: ‘New’ Labour, Air Transport Deregulation and the Competitive Market". Journal of Air Transport Management, 11 (4). pp. 297-298. ISSN 0969-6997 doi: 10.1016/j.jairtraman.2004.11.004

Gruneberg, S. (2005) The economics of construction labour - a discussion paper. In: CIB, Helsinki.

Gruneberg, S. (2005) The management of site management training: The national construction college site management course. CITB-Construction Skills, Bircham Newton.

Gruneberg, S. (2005) The performance of major firms in the heating and ventilating industry. In: ARCOM, School of Oriental and African Studies, London.

Gruneberg, S. (2005) The requirements and expectations of site management training courses in Britain: do courses meet the requirements? The case of the CITB site management course. In: EPSRC Seminar, University of Westminster.

Gruneberg, S. and Hughes, W.P. (2005) UK construction orders and output: A comparison of government and commercially available data 1995-2001. Journal of Financial Management of Property and Construction, 10 (2). pp. 83-94. ISSN 1366-4387 doi: 10.1108/13664380580001066

Henricsson, J.P.E. and Ericsson, S. (2005) Measuring construction industry competitiveness: A holistic approach. In: QUT Research Week 2005, Brisbane.

Hilburn, H. D. and Hughes, W. (2005) Regulating professions: Shifts in codes of conduct. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki.

Hobbs, R. E. and Ridge, I. M. L. (2005) Torque in mooring chain. Part 1: Background and theory. Journal of Strain Analysis for Engineering Design, 40 (7). pp. 703-713. ISSN 0309-3247 doi: 10.1243/030932405x30867

Hong, J., Chen, Z., Li, H., Clements-Croome, D.J. and Xu, Q. (2005) A casebase for teaching and learning intelligent buildings for sustainable built environment. In: Bear 2006: Construction Sustainability and Innovation, Hong Kong.

Hong, J., Chen, Z., Li, H., Shen, G.Q.P., Chung, J.K.H. and Xu, Q. (2005) A multicriteria lifespan energy efficiency approach to intelligent building assessment. In: The 5th China Urban Housing Conference, Hong Kong.

Hou, J. P., Cherruault, J. Y., Jeronimidis, G. and Mayer, R. (2005) Design, testing, and simulation of fibre composite leaf springs for heavy axle loads. Journal of Strain Analysis for Engineering Design, 40 (6). pp. 497-504. ISSN 0309-3247 doi: 10.1243/030932405x30704

Hou, J.P. and Jeronimidis, G. (2005) Finite element aided design evolution of composite leaf spring. Applied Mechanics and Materials, 3-4. pp. 429-434. doi: 10.4028/www.scientific.net/AMM.3-4.429

Huang, C. and Fisher, N. (2005) An alternative methodology for selecting enterprise resource planning systems. International Journal of Construction Management, 5 (1). pp. 39-57.

Hughes, W., Hillebrandt, P. and Greenwood, D. (2005) The impact of procurement method on costs of procurement. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki.

Ibarra-Castanedo, C., Avdelidis, N.P. and Maldague, X. (2005) Quantitative pulsed phase thermography applied to steel plates. Thermosense XXVII, 5782. pp. 342-351. doi: 10.1117/12.602360

Irving, S. and Clements-Croome, D.J. (2005) Natural ventilation in non-domestic buildings. In: Application Manual AM10. Chartered Institution of Building Services Engineers. ISBN 0900953772

Jewell, C.A., Flanagan, R. and Cattell, K. (2005) The effects of the informal sector on construction. In: Broadening Perspectives - Proceedings of the Construction Research Congress, San Diego, USA. doi: 10.1061/40754(183)78

John, G., Clements- Croome, D. and Jeronimidis, G. (2005) Sustainable building solutions: a review of lessons from the natural world. Building and Environment, 40 (3). pp. 319-328. ISSN 0360-1323 doi: 10.1016/j.buildenv.2004.05.011

John, G., Loy, H. and Clements-Croome, D. (2005) Innovative approach to building systems integration problems: Using systems theory, technological forecasting and scenario planning. In: 3rd Innovation in Architecture, Engineering and Construction (AEC) Conference, Amsterdam, Netherlands.

John, G., Loy, H., Clements-Croome, D., Fairey, V. and Neale, K. (2005) Contextual prerequisites for the application of ILS principles to the building services industry. Journal of Construction and Engineering Management, 12 (4). pp. 307-328. ISSN 0733-9364 doi: 10.1108/09699980510608794

Kaluarachchi, Y., Jones, K., James, P.A.B., Jentsch, M., Bahaj, A.S., Clements-Croome, D. and Gann, D. (2005) Building facades: Issues of sustainability, maintenance and refurbishment (SUE-IDCOP). Proceedings of Institution of Civil Engineering. ISSN 0020-3262 doi: 10.1680/ensu.158.2.89.67119

Kaluarachchi, Y., Jones, K., James, P.A.B., Jentsch, M., Bahaj, A.S., Clements-Croome, D. and Gann, D. (2005) Building facades: Issues of sustainability, maintenance and refurbishment (SUE-IDCOP). In: EPSRC SUE-IDCOP Research Fellow Conference SUE Vision into Action, University of Birmingham, 28 Feb-2 March.

Karimipanah, T., Awbi, H.B., Blomqvist, C. and Sandberg, M. (2005) Effectiveness of confluent jets ventilation system for classrooms. In: 10th International Conference in Indoor Air Quality and Climate (Indoor Air 2005), Beijing, China.

Khalfan, M., Kashyap, M. and Chen, Z. (2005) Readiness assessment for sustainable construction. In: 2nd International SCRI Research Symposium, University of Salford, UK.

Klemeš, J., Bulatova, I. and Cockerill, T. (2005) Economic modelling and cost functions of CO2 capture processes. In: European Symposium on Computer Aided Process Engineering.

Kong, S., Anumba, C., Li, H. and Chen, Z. (2005) Adopting standardized construction products information for interoperable catalogue. In: AEC2005: the 3rd International Conference on Innovation in Architecture, Engineering and Construction, Rotterdam, The Netherlands.

Kong, S.C.W., Li, H., Hung, Y.L.T., Anumba, C. and Chen, Z. (2005) Web services enhanced interoperable construction products catalogue. Automation in Construction, 14 (3). pp. 343-352. doi: 10.1016/j.autcon.2004.08.008

Kwawu, W. and Hughes, W. (2005) The impact of relational contracting on the construction industry. In: ARCOM, School of Oriental and African Studies, London.

Lansley, P. (2005) Ageing: Scientific aspects. House of Lords Science and Technology Committee

Lansley, P. (2005) Six years of the EQUAL research initiative. In: Include2005, Royal College of Art, London.

Lansley, P. and Smith, V. (2005) Dissolving boundaries: The EPSRC EQUAL research network. In: Include2005, Royal College of Art, London.

Lansley, P., Flanagan, S., Goodacre, K., Turner-Smith, A. and Cowan, D. (2005) Assessing the adaptability of the existing homes of older people. Building and Environment, 40 (7). pp. 949-963. ISSN 0360-1323 doi: 10.1016/j.buildenv.2004.09.011

Larsen, G.D. (2005) Horses for courses: Relating innovation diffusion concepts to the stage of the diffusion process. Construction Management and Economics, 23 (8). pp. 787-792. ISSN 0144-6193 doi: 10.1080/01446190500204770

Larsen, G.D. (2005) Innovation diffusion in the UK construction industry: The introduction of an awareness threshold level concept. In: Innovative Developments in Architecture, Engineering and Construction, Delft University of Technology, Amsterdam.

Larsen, G.D. and Ballal, T.M.A. (2005) The diffusion of innovations within a UKCI context: An explanatory framework. Construction Management and Economics, 23 (1). pp. 81-91. ISSN 0144-6193 doi: 10.1080/0144619042000287750

Leiringer, R., Fernie, S. and Sörensen, N. (2005) Adopting partnering in Sweden: A critical perspective. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki.

Li, H., Chen, Z. and Kong, S. (2005) Application of integrated GPS and GIS technology for reducing construction waste and improving construction efficiency. Automation in Construction, 14 (3). pp. 323-331. ISSN 0926-5805 doi: 10.1016/j.autcon.2004.08.007

Lowe, D.J. and Leiringer, R. (2005) Commercial management in project-based organisations. Journal of Financial Management of Property and Construction, 10 (1). pp. 4-18. ISSN 1366-4387

McCrindle, R., Cook, G., Booy, D., Barrett, D. and O'Neill, L. (2005) Accessible hospital bedside systems. In: Include 2005.

McCrindle, R., Cook, G., Booy, D., Barrett, J. and O'Neill, L. (2005) Designing hospital bedside systems for use by patients with a visual impairments. In: Vision 2005, London. doi: 10.1016/j.ics.2005.05.196

Moropoulou, A., Avdelidis, N.P. and Delegou, E.T. (2005) NDT and planning on historic buildings and complexes for the protection of cultural heritage. In: van Grieken, R. and Janssens, K. (eds.) Cultural Heritage Conservation and Environmental Impact Assessment by Non-Destructive Testing and Micro-Analysis. Taylor and Francis, pp. 67-76. ISBN 9780849307324

Moropoulou, A., Avdelidis, N.P., Labropoulos, K., Moundoulas, P., Polymenakou, D., Stavrakas, D. and Terezakis, P. (2005) Use of thermography and fibre optics microscopy for the evaluation of railway structures in the Athens Metro in Greece (Invited Paper). Thermosense XXVII, 5782. pp. 371-378. doi: 10.1117/12.601085

Nanayakkara, L. (2005) An empirically grounded framework for human resource management in the Sri Lankan construction industry. In: ARCOM, School of Oriental and African Studies.

Needham, A. J., Jiang, D., Bibas, A., Jeronimidis, G. and O'Connor, A. F. (2005) The effects of mass loading the ossicles with a floating mass transducer on middle ear transfer function. Otology & Neurotology, 26 (2). pp. 218-224. ISSN 1531-7129

Plummer, S.F., Garaiova, I., Sarvotham, T., Cotterel, L., Le Scouiller, S., Weaver, M.A., Tang, J., Dee, P. and Hunter, J. (2005) The effects of probiotics on the composition of the intestinal microbiota following antibiotic therapy. International Journal of Antimicrobial Agents, 26 (1). pp. 69-74. ISSN 0924-8579 doi: 10.1016/j.ijantimicag.2005.04.004

Ridge, I. M. L. and Hobbs, R. E. (2005) Torque in mooring chain. Part 2: Experimental investigation. Journal of Strain Analysis for Engineering Design, 40 (7). pp. 715-728. ISSN 0309-3247 doi: 10.1243/030932405x30876

Salama, H. and Flanagan, R. (2005) The challenges facing privatization of infrastructure projects in Libya. In: QUT Research week 2005, Brisbane.

Santulli, C., Janssen, M. and Jeronimidis, G. (2005) Partial replacement of E-glass fibres with flax fibres in composites and effect on falling weight impact performance. Journal of Materials Science, 40 (13). pp. 3581-3585. ISSN 0022-2461 doi: 10.1007/s10853-005-2882-y

Santulli, C., Patel, S. I., Jeronimidis, G., Davis, F. J. and Mitchell, G. R. (2005) Development of smart variable stiffness actuators using polymer hydrogels. Smart Materials & Structures, 14 (2). pp. 434-440. ISSN 0964-1726 doi: 10.1088/0964-1726/14/2/018

Shearman, J., Hughes, W., Gilchrist, R. and Elwazani, S. (2005) Strategies for reducing construction problems on archaeological sites. In: ARCOM, School of Oriental and African Studies, London.

Shipworth, D. (2005) Integrating sustainable consumption and production: Linking models of the sociology of consumption with the national environmental accounting of production. In: 37th World Congress of the International Institute of Sociology, Stockholm, Sweden.

Shipworth, D. (2005) Synergies and conflicts on the landscape of domestic energy consumption: beyond metaphor. In: 7th European Council for an Energy Efficient Economy Summer Study, Mandelieu, France.

Shipworth, D. (2005) Truth in complex adaptive systems models should be based on truth by constructive verification. In: Complexity, Science and Society Conference, Liverpool, UK. doi: 10.1142/9789812707420_0009

Shipworth, M. (2005) Transdisciplinarity in the sociology of energy use. In: 37th World Congress of the International Institute of Sociology, Stockholm, Sweden.

Shipworth, M. (2005) Translating research into practice: Lessons from a report to the Australian Greenhouse Office. In: EPUK4 - 4th Environmental Psychology in the UK Conference: Putting research into practice, Glasgow.

Tiburcio, T. (2005) Improving learning environment. In: ICL 2005 - Interactive Computer Aided Learning; School and IT, Austria.

Tiburcio, T. (2005) The future of the classroom: Changes and challenges. In: CIB W096 - Architectural Management, Lyngby, Denmark.

Tiburcio, T. and Finch, E. (2005) The impact of an intelligent classroom on pupils' interactive behaviour. Facilities, 23 (5/6). pp. 262-278. ISSN 0263-2772 doi: 10.1108/02632770510588664

Tiburcio, T. and Finch, E. (2005) The impact of high-tech learning environments on pupils' interactions. In: Combining Forces- Advancing Facilities Management & Construction through Innovation Series; Facilities Business and its Management, Helsinki.

Tinker, A. and Lansley, P. (2005) Introducing assistive technology into the existing homes of older people: Feasibility, acceptability, costs and outcomes. Journal of Telemedicine and Telecare, 11 (Supplement 1). pp. 1-3. ISSN 1357-633X doi: 10.1258/1357633054461787

Wu, S. M. (2005) Joint importance of multistate systems. Computers & Industrial Engineering, 49 (1). pp. 63-75. ISSN 0360-8352 doi: 10.1016/j.cie.2005.02.001

Wu, S. M. and Clements-Croome, D. (2005) Burn in policies for products having dormant states. In: Cui, L. and Tsang, A. H. C. (eds.) Proceedings of the 4th International Conference on Quality & Reliability. Beijing Inst Technology Pr, Beijing, pp. 567-573. ISBN 781045742X

Wu, S. M. and Clements-Croome, D. (2005) Critical reliability issues for building services systems. In: Cui, L. and Tsang, A. H. C. (eds.) Proceedings of the 4th International Conference on Quality & Reliability. Beijing Inst Technology Pr, Beijing, pp. 559-565. ISBN 781045742X

Wu, S. M. and Clements-Croome, D. (2005) Optimal maintenance policies under different operational schedules. IEEE Transactions on Reliability, 54 (2). pp. 338-346. ISSN 0018-9529 doi: 10.1109/tr.2005.847255

Wu, S. M. and Clements-Croome, D. (2005) Preventive maintenance models with random maintenance quality. Reliability Engineering & System Safety, 90 (1). pp. 99-105. ISSN 0951-8320 doi: 10.1016/j.ress.2005.03.012

Wu, S. and Clements-Croome, D.J. (2005) A novel repair model for imperfect maintenance. IMA Journal of Management Mathematics, 17 (3). pp. 235-243. ISSN 1471-678X doi: 10.1093/imaman/dpi036

2004

Al Bizri, S. and Gray, C. (2004) Modelling for planning building design - a critique of available approaches. In: Proceedings of Construction and Building Research (COBRA) Conference, Leeds.

Al Bizri, S. and Gray, C. (2004) The management of design. In: Clements-Croome, D.J. (ed.) Intelligent buildings: design, management and operation. Thomas Telford, London, pp. 245-272. ISBN 9780727732668

Al Bizri, S. and Gray, C. (2004) Managing a multi-layered briefing process using Quality Function Deployment. In: CIB World Building Congress 2004: Building for the future, Toronto.

Aragrag, N., Castiglione, D. C., Davies, P. R., Davis, F. J. and Patel, S.I. (2004) General procedures in chain-growth polymerization. In: Davis, F. J. (ed.) Polymer Chemistry: A Practical Approach. Oxford University Press, pp. 43-98. ISBN 9780198503095

Atkins, A. G., Xu, X. and Jeronimidis, G. (2004) Cutting, by 'pressing and slicing,' of thin floppy slices of materials illustrated by experiments on cheddar cheese and salami. Journal of Materials Science, 39 (8). pp. 2761-2766. ISSN 0022-2461 doi: 10.1023/B:JMSC.0000021451.17182.86

Atkins, A.G. (2004) Fracture toughness and cutting. Engineering fracture mechanics, 12 (2). pp. 263-274. ISSN 0013-7944 doi: 10.1080/00207547408919554

Atkins, A.G. (2004) Rosenheim and Sterney revisited: the 'tear' chip in cutting interpreted in terms of modern ductile fracture mechanics. Proceedings of the Institute of Mechanical Engineers - Part C Journal of Mechanical Engineering Science, 218. 1181 - 1194.

Atkins, A.G. (2004) Toughness, the shearing of self-mated junctions and friction. Wear, 257 (1-2). pp. 154-156. ISSN 0043-1648 doi: 10.1016/j.wear.2003.10.022

Baldock, A. and Fulford, D. (2004) Economic potential of large-scale biomass to electricity conversation technologies. In: 2nd World Conference and Technology Exhibition on Biomass for Energy, Industry and Climate Protection, Palazzo dei Congressi, Rome, Italy.

Barnett, J.R. and Bonham, V.A. (2004) Cellulose microfibril angle in the cell wall of wood fibres. Biological Reviews, 79 (2). pp. 461-472. ISSN 1464-7931 doi: 10.1017/S1464793103006377

Bonser, R. H. C., Deaton, K. E., Bishop, C. M. and Butler, P. J. (2004) The effect of impaired thyroid function during development on the mechanical properties of avian bone. Journal of Experimental Zoology Part a-Comparative Experimental Biology, 301A (8). pp. 636-641. ISSN 0022-104X doi: 10.1002/jez.a.112

Bonser, R. H. C., Saker, L. and Jeronimidis, G. (2004) Toughness anisotropy in feather keratin. Journal of Materials Science, 39 (8). pp. 2895-2896. ISSN 0022-2461 doi: 10.1023/B:JMSC.0000021474.75864.ff

Bonser, R.H.C. , Harwin, W.S. , Hayes, W. , Jeronimidis, G. , Mitchell, G.R. and Santulli, C. (2004) EAP-Based artificial muscles as an alternative to space mechanisms. University of Reading

Bonser, R.H.C., Jeronimidis, G. and Saker, L. (2004) Exploring the toughness of feather keratin. In: SEB annual meeting.

Bourbia, F. and Awbi, H. B. (2004) Building cluster and shading in urban canyon for hot dry climate - Part 1: Air and surface temperature measurements. Renewable Energy, 29 (2). pp. 249-262. ISSN 0960-1481 doi: 10.1016/s0960-1481(03)00170-8

Bourbia, F. and Awbi, H. B. (2004) Building cluster and shading in urban canyon for hot dry climate Part 2: Shading simulations. Renewable Energy, 29 (2). pp. 291-301. ISSN 0960-1481 doi: 10.1016/s0960-1481(03)00171-x

Bright, K., Cook, G. and Harris, J. (2004) Colour, contrast & perception: A design guidance for internal built environments. Research Group for Inclusive Environments . ISBN 9780704912083

Campbell, L. and Finch, E. (2004) Customer satisfaction and organisational justice. Facilities, 22 (7). pp. 178-189. ISSN 0263-2772 doi: 10.1108/02632770410547543

Campbell, L. and Finch, E. (2004) The development of service level agreements for relocation management - A preliminary framework. In: CIB W70 International Symposium on Facilities Management & Asset Maintenance, Hong Kong.

Cattell, K., Flanagan, R. and Jewell, C.A. (2004) Competitiveness and productivity in the construction industry: the importance of definitions. In: Proceedings of the Construction Industry Development Board (CIDB), 2nd Postgraduate Conference, Cape Town.

Chanliaud, E., De Silva, J. , Strongitharm, B. , Jeronimidis, G. and Gidley, M.J. (2004) Mechanical effects of plant cell wall enzymes on xyloglucan/cellulose composites. The Plant Journal, 38 (1). pp. 27-37. ISSN 0960-7412 doi: 10.1111/j.1365-313X.2004.02018.x

Cho, Y. and Awbi, H.B. (2004) Multiple regression analysis of the variation in room velocity with change in heat source location for mixing ventilation. In: 9th Int. Conference on Air Distribution in Rooms (Roomvent 2004), Coimbra, Portugal.

Cho, Y. and Awbi, H.B. (2004) The effect of changing workstation position on the ventilation performance of a room with mixing ventilation, Paper 709. In: CIB 2004 World Building Congress: Building for the future, Toronto, Canada.

Cho, Y., Awbi, H.B. and Karimipanh, T. (2004) The characteristics of wall confluent jets for ventilated enclosures. In: 9th Int. Conference on Air Distribution in Rooms (Roomvent 2004), Coimbra, Portugal.

Clements-Croome, D.J. (2004) Building environment, architecture and people. In: Clements-Croome, D.J. (ed.) Intelligent buildings: design, management and operation. Thomas Telford, London, pp. 53-100. ISBN 9780727732668

Clements-Croome, D.J. (2004) The Concept of Intelligent Buildings. In: International Conference, University of Krakow.

Clements-Croome, D.J. (2004) Intelligent buildings: Design management and operation. Thomas Telford, pp408. ISBN 9780727732668

Clements-Croome, D.J. (2004) Sustainable architecture. In: Clements-Croome, D.J. (ed.) Intelligent Buildings: Design, Management and Operation. Thomas Telford, London. ISBN 9780727732668

Clements-Croome, D.J., John, G., Loy, H. and Wu, S. (2004) Building performance of intelligent buildings. In: CIB World Building Congress 2004: Building for the future.

Clements-Croome, D.J., John, G., Loy, H. and Wu, S. (2004) Environmental quality and the productive workplace. In: CIB World Building Congress 2004: Building for the future.

Collis, V.J., Blowey, R.W., Packington, A.J. , Bonser, R.H.C. and Green, L.E. (2004) Testing white line strength in the dairy cow. Journal of Dairy Science, 87 (9). pp. 2874-2880. ISSN 0022-0302

Cook, G. K. (2004) Lighting, colour and acoustics. In: Buildings for all to use - improving the accessibility of public buildings and environments. CIRIA. ISBN 9780860176107

Cook, G. K. (2004) Public service director: Designs for everyone. GovNet Communications, 3 (3). p. 83.

Cook, G.K. (2004) Colour contrast and lighting. In: Bright, K. (ed.) Disability: Making Buildings Accessible. Workplacelaw Network, Cambridge, 54 - 62. ISBN 1900648849

Coutand, C., Jeronimidis, G., Chanson, B. and Loup, C. (2004) Comparison of mechanical properties of tension and opposite wood in Populus. Wood Science and Technology, 38 (1). pp. 11-24. ISSN 0043-7719 doi: 10.1007/s00226-003-0194-4

Donovan, S. K. and Hughes, W. (2004) On journal publication and professional responsibilities. Area, 36 (3). pp. 325-326. ISSN 1475-4762 doi: 10.1111/j.0004-0894.2004.00231.x

Elmualim, A.A. and Awbi, H.B. (2004) Evaluating a control strategy for a hybrid air-conditioning and windcatchers ventilation system. In: CIB 2004 World Building Congress, Toronto, Canada.

Evans, J.J. and Ridge, I.M.L. (2004) Rope and rope like structures. In: Jenkins, C.J.M. (ed.) Compliant Structures in Nature and Engineering. The International Series on Design & Nature. Vol. 5. WIT press. ISBN 9781853129414

Fernie, S., Weller, S. and Green, S. (2004) Aspirations of collaboration: Integrated procurement and the mediating effects of context. In: CIB World Building Congress 2004: Building for the future, Toronto, Canada.

Finch, E. (2004) Facilities Management (Chapter 11). In: Clements-Croome, D.J. (ed.) Intelligent Buildings: Design Management and Operation. Thomas Telford, pp. 289-302. ISBN 9780727732668

Fisher, N. (2004) Managing construction projects. In: Clements-Croome, D.J. (ed.) Intelligent Buildings: Design, Management and Operation. Thomas Telford, London, pp. 273-288. ISBN 9780727732668

Fisher, N. (2004) A critical review of the management of construction projects. In: International Symposium on the Advancement of Construction management and Real Estate, Hong Kong, China.

Flanagan, R. (2004) The future forces of change - a global perspective. In: Proceedings of EPPM Conference Product and Process Modelling in the Building and Construction Industry, Istanbul.

Flanagan, S. (2004) The REKI project. Access by Design (99). pp. 126-31.

Gindl, M. , Jeronimidis, G., Atkins, A.G. and Stanzl-Tschegg, S. (2004) Continuous hardness testing for the determination of mechanical and fracture-mechanical properties of laminated particleboards. In: 2nd International Symposium on Wood Machining, Vienna.

Gindl, W. and Jeronimidis, G. (2004) Wood pulp fiber reinforced melamine-formaldehyde composites. Journal of Materials Science, 39 (9). pp. 3245-3247. ISSN 0022-2461 doi: 10.1023/B:JMSC.0000025870.09117.f6

Gindl, W., Hansmann, C., Gierlinger, N., Schwanninger, M., Hinterstoisser, B. and Jeronimidis, G. (2004) Using a water-soluble melamine-formaldehyde resin to improve the hardness of Norway spruce wood. Journal of Applied Polymer Science, 93 (4). pp. 1900-1907. ISSN 0021-8995 doi: 10.1002/app.20653

Gindl, W., Schoberl, T. and Jeronimidis, G. (2004) The interphase in phenol-formaldehyde (PF) and polymeric methylene di-phenyl-di-isocyanate (pMDI) glue lines in wood (vol 24, pg 279, 2004). International Journal of Adhesion and Adhesives, 24 (6). p. 535. ISSN 0143-7496 doi: 10.1016/j.ijadhadh.2004.07.001

Gray, C. (2004) Technology clusters used to achieve project performance change. In: Proceedings of the 3rd Scientific Conference in Construction Project Management: Clustering in Construction Project Management, Thessaloniki.

Green, S. D. (2004) The truth of partnering is not all roses. Construction News (January 8 2004). p. 11.

Green, S. D., Newcombe, R., Fernie, S. and Weller, S. (2004) Learning across business sectors: Aspects of human resource management in aerospace and construction. In: Kalidindi, S.N. and Varghese, K. (eds.) Project Procurement for Infrastructure Construction. Narosa, New Delhi, pp. 218-226. ISBN 9788173195914

Green, S.D., Newcombe, R., Fernie, S. and Weller, S. (2004) Learning across business sectors: Knowledge sharing between aerospace and construction. The University of Reading, Reading, pp84.

Gruneberg, S. and Hughes, W.P. (2004) Analysing the types of procurement used in the UK: a comparison of two data sets. Journal of Financial Management of Property and Construction, 9 (2). pp. 65-74. ISSN 1366-4387

Gruneberg, S. and Hughes, W.P. (2004) Construction consortia: Do they serve any real purpose? In: Proceedings 20th Annual ARCOM Conference, Heriot-Watt University, Edinburgh.

Henricsson, J.P.E., Ericsson, S., Flanagan, R. and Jewell, C.A. (2004) Rethinking competitiveness for the construction industry. In: Proceedings 20th Annual ARCOM Conference, Heriot-Watt University, Edinburgh.

Hughes, W. P., Ancell, D., Gruneberg, S. and Hirst, L. (2004) Exposing the myth of the 1:5:200 ratio relating initial cost, maintenance and staffing costs of office buildings. In: Proceedings of the 20th Annual ARCOM Conference, Heriot-Watt University, Edinburgh.

Hughes, W.P. (2004) Are bidding costs wasted? Construction Manager. p. 18.

Hughes, W.P. (2004) Effective conference presentations. ARCOM Newsletter, 18 (3). pp. 6-7.

Hughes, W.P. (2004) PhD studies in the built environment. In: 4th International Postgraduate Research Conference, University of Salford.

Inalhan, G. and Finch, E. (2004) What impact does place attachment have on employees' perception of change? In: EuroFM Conference, Copenhagen.

Inalhan, G. and Finch, E. (2004) Place attachment and sense of belonging in the offices. Facilities, 22 (5/6). pp. 120-128. ISSN 0263-2772

Jeronimidis, G. (2004) Biodynamics (Natural dynamic systems, material behaviour and adaptation in architecture and engineering). Architectural Design, 74 (3). pp. 90-95. ISSN 0003-8504

Jeronimidis, G. (2004) Wood machining: problems, approaches and strategies. In: 2nd International Symposium on Wood Machining, Vienna.

John, G.A., Loy, H.M., Clements-Croome, D.J., Fairey, V. and Neale, K. (2004) A systems thinking approach for performance based buildings. In: CIB World Building Congress 2004: Building for the future, Toronto, Canada.

Khoo, I. and Cook, M. (2004) Web-based occupant feedback for building energy management systems using fuzzy logic. In: ESDA 2004 on CD-Rom, 7th Biennial ASME Conference, Manchester UK. doi: 10.1115/ESDA2004-58137

Lansley, P. (2004) Adapting the homes of older people: cost effectiveness and quality of life. In: Responding to Change, Cobra 2004, Leeds.

Lansley, P. (2004) Assistive technology and the demands of an ageing population. In: Technology for Independent Living Conference, Royal Society of Medicine, London.

Lansley, P. (2004) Better environments for healthy ageing. In: Inquiry into Scientific Aspects of Ageing, British Academy, London.

Lansley, P. (2004) Design and construction research for quality of life. In: Building for the Future, CIB World Building Congress 2004, Ontario, Canada.

Lansley, P. (2004) Extending the quality of life of older people: Challenges for design and engineering research. In: David Wiffen Memorial Lecture, University of Newcastle.

Lansley, P. (2004) Introduction to the EQUAL Programme. In: l'DGO Launch, British Academy, London.

Lansley, P. and Smith, V. (2004) The contribution of building research to the independence and quality of life of older people. In: Responding to Change, Cobra 2004, Leeds Metropolitan University, Leeds.

Lansley, P. and Smith, V. (2004) Independence and quality of life: The contribution of design and engineering research. In: UNSPECIFIED, Cafe Scientifique, Zizkov Tower Cafe, Prague & Czech Academy of Sciences, Prague.

Lansley, P., McCreadie, C. and Tinker, A. (2004) Can adapting the homes of older people and providing assistive technology pay its way? Age and Ageing, 33 (6). pp. 571-576. ISSN 0002-0729 doi: 10.1093/ageing/afh190

Lansley, P., McCreadie, C., Tinker, A., Flanagan, S., Goodacre, K. and Turner-Smith, A. (2004) Adapting the homes of older people: A case study of costs and savings. Building Research and Information, 32 (6). pp. 468-483. ISSN 0961-3218 doi: 10.1080/0961321042000269429

Lee, H. and Awbi, H. B. (2004) Effect of internal partitioning on indoor air quality of rooms with mixing ventilation - basic study. Building and Environment, 39 (2). pp. 127-141. ISSN 0360-1323 doi: 10.1016/j.buildenv.2003.08.007

Lee, H. and Awbi, H. B. (2004) Effect of internal partitioning on room air quality with mixing ventilation-statistical analysis. Renewable Energy, 29 (10). pp. 1721-1732. ISSN 0960-1481 doi: 10.1016/j.renene.2003.12.023

Loy, H., John, G., Clements-Croome, D., Fairey, V. and Neale, K. (2004) Achieving quality through statistical prediction for building services systems. Building Services Engineering Research and Technology, 25 (2). pp. 99-110. ISSN 0143-6244 doi: 10.1191/0143624404bt082oa

Milner, J. and Allen, C. (2004) "I don't know what you are trying to establish": The socio-environmental 'problems' of visual impaired children. Journal of Social Policy and Society, 3 (1). pp. 1-10. ISSN 1474-7464 doi: 10.1017/S1474746403001441

Moore, M. and Finch, E. (2004) Facilities management in South East Asia. Facilities, 22 (9/10). pp. 259-270. ISSN 0263-2772 doi: 10.1108/02632770410555986

Pardoen, T., Hachez, F., Marchioni, B., Blyth, P.H. and Atkins, A.G. (2004) Mode I fracture of sheet metal. Journal of the Mechanics and Physics of Solids, 52. pp. 423-452. ISSN 0022-5096 doi: 10.1016/S0022-5096(03)00087-5

Potter, B., Shirsavar, S.A. and Ridge, I.M.L. (2004) Purpose built teaching equipment for a laboratory based course in three phase machines and drives. In: International Conference on Mechatronics 2004 (ICM'04), Istanbul, Turkey.

Prescott, N. B. and Bonser, R. H. C. (2004) Beak trimming reduces feeding efficiency of hens. Journal of Applied Poultry Research, 13 (3). pp. 468-471. ISSN 1056-6171

Ransgri, W., Gril, J. and Jeronimidis, G. (2004) Finite elements simulation of the transverse compressive deformation of a tropical hardwood. In: 2nd International Conference of the European Society of Wood Mechanics, Stockholm.

Santulli, C. (2004) Biomimetic clues for tissue engineering materials. In: 6th Summer School on Materials, Jesi, Italy.

Santulli, C. (2004) Biomimetic interest and possibilities for replacement of glass fibres with plant fibres in composite materials: the case of impact damage. In: Proceedings 5th Summer School on Materials, Jesi.

Santulli, C. (2004) Critical length measurements in carbon fibers during single fiber fragmentation tests using acoustic emission. Journal of Materials Science, 39 (8). pp. 2905-2907. ISSN 0022-2461 doi: 10.1023/B:JMSC.0000021477.09656.97

Santulli, C. and Jeronimidis, G. (2004) Damage detection in fruits using Laser Doppler vibrometry. In: British Non-Destructive Testing Conference, Torquay.

Schmitt, U. , Ander, P. , Barnett, J.R. , Emons, A.M.C. and Jeronimidis, G. (2004) Wood fibre cell walls: Methods to study their formation, structure and properties. Uppsala University, pp308. ISBN 9789157668035

Shorten, D. and Chaplin, C.R. (2004) Wire rope lubrication. In: International Cranes and Specialised Transport.

Taylor, A.M., Bonser, R.H.C. and Farrent, J.W. (2004) The influence of hydration on the tensile and compressive properties of avian keratinous tissues. Journal of Materials Science, 39 (3). pp. 939-942. ISSN 0022-2461 doi: 10.1023/B:JMSC.0000012925.92504.08

Tinker, A., McCreadie, C. and Lansley, P. (2004) Home help. Housing Today. pp. 28-29.

Vanucci, P. and Vincenti, A. (2004) Recent advances in the optimal design of laminates by the polar-genetic approach. In: 21st ICTAM (XXI International Congress of Theoretical and Applied Mechanics), Warsaw, Poland.

Weller, S., Green, S. D. and Fernie, S. (2004) Learning across business sectors: facets of innovation in aerospace and construction. Project Procurement for Infrastructure Construction. pp. 344-352.

Wheal, R., Fulford, D., Wheldon, A. and Oldach, R. (2004) Photovoltaics (PV) in social housing. International Journal of Ambient Energy, 25 (1). ISSN 0143-0750

Winwood, K., Zioupos, P. and Gresle, M. (2004) Microstructural and physical effects in the fatigue behaviour of human cortical bone. Journal of Biomechanics, 41 (Supplement 1). doi: 10.1016/S0021-9290(08)70385-3

Wu, S., John, G.A., Loy, H.M. and Clements-Croome, D.J. (2004) A novel repair model for imperfect maintenance. In: 5th Int. Mathematics and its Applications and Reliability Conference "Impact on Practice", University of Salford.

Xu, X., Jeronimidis, G., Atkins, A.G. and Trusty, P.A. (2004) Rate-dependent fracture toughness of polycrystalline ice. Journal of Material Sciences, 39 (1). pp. 225-233. ISSN 0022-2461 doi: 10.1023/B:JMSC.0000007748.36956.a9

Xu, X., Jeronimidis, G., Atkins, A.G. and Trusty, P.A. (2004) Stress relaxation behaviour of frozen sucrose solutions. Journal of Texture Studies, 35 (1). pp. 11-32. ISSN 0022-4901 doi: 10.1111/j.1745-4603.2004.tb00820.x

2003

Arranz-Piera, P., Fulford, D.J. and Wheldon, A. (2003) Research model for the diffusion of PV: Application to social housing. In: ISES Solar World Congress 2003, Göteborg, Sweden.

Atkins, A.G. (2003) Modelling metal cutting using modern ductile fracture mechanics: Quantitative explanations for some longstanding problems. International Journal of Mechanical Sciences, 45 (2). pp. 373-396. ISSN 0020-7403 doi: 10.1016/S0020-7403(03)00040-7

Awbi, H.B. (2003) Ventilation of buildings. Taylor and Francis, London, pp328. ISBN 9780415270557

Barrett, J. , Cook, G. , McCrindle, R. , Booy, D. and Arnold, F. (2003) Considering patients' needs: Inclusive interface design for a hospital system. In: Include 2003 Conference Proceedings, Royal College of Art.

Bartolo, H. and Bartolo, P. J. S. (2003) COMPUTER assisted technologies to enhance CONCURRENce in building DESIGN. In: Uwakweh, B. O. and Minkarah, I. A. (eds.) Construction Innovation and Global Competitiveness, Vols 1 and 2 - the Organization and Management of Construction. Crc Press-Taylor & Francis Group, Boca Raton, pp. 143-157. ISBN 0849314496

Bon, R., Gibson, V. and Luck, R. (2003) Annual CREMRU-JCI survey of corporate real estate practices in Europe and North America: 1993-2002. Facilities, 21 (7/8). pp. 151-167. ISSN 0263-2772 doi: 10.1108/02632770310489891

Bonser, R. H. C. and Casinos, A. (2003) Regional variation in cortical bone properties from broiler fowl - a first look. British Poultry Science, 44 (3). pp. 350-354. ISSN 0007-1668 doi: 10.1080/0007166031000085571

Bonser, R. H. C., Farrent, J. W. and Taylor, A. M. (2003) Assessing the frictional and abrasion-resisting properties of hooves and claws. Biosystems Engineering, 86 (2). pp. 253-256. ISSN 1537-5110 doi: 10.1016/s1537-5110(03)00136-3

Bradon, J. E. and Ridge, I. M. L. (2003) Comparison of white metal and resin socket terminations for wire ropes. Journal of Strain Analysis for Engineering Design, 38 (2). pp. 149-160. ISSN 0309-3247 doi: 10.1243/030932403321163677

Bright, K. , Cook, G. and Sinka, I. (2003) Project Crystal: Accessible environments for deaf or hard of hearing people. In: Include 2003, Royal College of Art, London.

Bright, K. , Cook, G., Hill, S. and O'Neill, L. (2003) Inclusive lighting design in the home. In: Include 2003, Royal College of Art, London.

Bright, K., Cook, G., Yohannes, I., Dalke, H. and Camgöz, N. (2003) Colour and lighting design for inter-modal transport environments. In: Include 2003, Royal College of Art, London.

Bright, K., Flanagan, S., Goodacre, K. and Lansley, P. (2003) Introducing assistive technologies (AT) into the existing homes of older people. In: Include 2003, Royal College of Art, London.

Bright, K.T. (2003) Housing for older people with sensory impairments. In: 10th Annual Conference of the Housing, Care and Support Journal, UMIST, UK.

Bright, K.T. (2003) Inclusive environments - Including everyone. Directions 29, Newsletter of the Sign Design Society. pp. 5-7.

Bright, K.T. and Cook, G.K. (2003) Lighting and colouring the way to inclusive, accessible environments. In: Vision Loss in the 21st Century - Everybody's Business, Los Angeles, USA.

Bright, K.T., Cook, G.K. , O'Neill, L.A. and Hill, S.L. (2003) Lighting the homes of visually impaired people. In: 11th International Mobility Conference (IMC11) 'In touch with Africa, in step with the world', South Africa.

Cameron, G. J., Wess, T. J. and Bonser, R. H. C. (2003) Young's modulus varies with differential orientation of keratin in feathers. Journal of Structural Biology, 143 (2). pp. 118-123. ISSN 1047-8477 doi: 10.1016/s1047-8477(03)00142-4

Chaplin, C.R. (2003) Rope tension in double drum traction winches. In: OIPEEC Technical Meeting: Experiences with Ropes, Lenzberg, Switzerland.

Cho, Y. and Awbi, H.B. (2003) The variation of ventilation performance in relation to change in workstation location in a ventilated room. In: Healthy Buildings 2003, Singapore.

Clements-Croome, D. J., ed. (2003) Electromagnetic environments and health in buildings. E & FN Spon, pp535. ISBN 9780415316569

Clements-Croome, D. J. (2003) Environmental quality and the productive workplace. In: Anumba, C. J. (ed.) Innovative Developments in Architecture, Engineering and Contruction. Millpress Science Publishers, Rotterdam, pp. 335-341. ISBN 9789059660083

Clements-Croome, D., Jones, K., John, G. and Loy, H. (2003) Through life business modelling for sustainable architecture. In: The Worldwide CIBSE/ASHRAE Conference, Building Sustainability, Value and Profit, Edinburgh International Conference Centre Scotland.

Cook, G.K., Bright, K.T., O'Neill, L. and Hill, S. (2003) Lighting in the homes of visually impaired people. In: 11th International Mobility Conference, Stellenbosch, South Africa.

Cook, G.K., Dalke, H., Bright, K.T., Yohannes, I. and Camgoz, N. (2003) Inclusive transport environments for people who are visually impaired. In: 11th International Mobility Conference - in touch with Africa, in step with the world, Stellenbosch, South Africa.

Cotton, J.R., Zioupos, P., Winwood, K. and Taylor, M. (2003) Analysis of creep strain during tensile fatigue of cortical bone. Journal of Biomechanics, 36 (7). pp. 943-949. ISSN 0021-9290 doi: 10.1016/S0021-9290(03)00063-0

Dalke, H. , Camgöz, N., Bright, K., Cook, G., Littlefair, P. and Loe, D. (2003) Research with users: Colour design and lighting for public transport, prison and healthcare environments. In: Include 2003, Royal College of Art, London.

Elmualim, A. and Awbi, H. (2003) Post-occupancy monitoring of windcatchers for summer ventilation in the UK. In: Healthy Buildings 2003, National University of Singapore.

Elmualim, A. .A. and Awbi, H. B. (2003) Post occupancy evaluation of a building employing windcatchers for summer ventilation. Facilities, 21 (13/14). pp. 323-332. ISSN 0263-2772 doi: 10.1108/02632770310507980

Elmualim, A.A., Awbi, H.B., Fullford, D. and Wetterstad, L. (2003) Performance evaluation of wall mounted convector for pre-heating naturally ventilated spaces. International Journal of Ventilation, 2 (3). pp. 213-224. ISSN 1473-3315

Fernie, S., Green, S. D., Weller, S. and Newcombe, R. (2003) Knowledge sharing: Context, confusion and controversy. International Journal of Project Management, 21 (3). pp. 177-187. ISSN 0263-7863 doi: 10.1016/S0263-7863(02)00092-3

Fernie, S., Green, S.D. and Weller, S.J. (2003) Dilettantes, discipline and discourse: requirements management for construction. Engineering, Construction and Architectural Management, 10 (5). pp. 354-367. ISSN 0969-9988 doi: 10.1108/09699980310502964

Finch, E. (2003) The untethered facilities manager. Facilities, 21 (5/6). pp. 126-133. ISSN 0263-2772 doi: 10.1108/02632770310476958

Flanagan, R. and Jewell, C.A. (2003) A review of recent work on construction futures. Construction Research and Innovation Strategy Panel, London.

Flanagan, R. and Jewell, C.A. (2003) The risk of mould damage over the whole life of a building. Royal Institution of Chartered Surveyors. p. 28.

Flanagan, R., Jackson, S. and Jewell, C.A. (2003) The management of risk - Yours, mine and ours. RICS. p. 42.

Gibson, V. and Luck, R. (2003) Real estate: Changing policies, functions and activities 1993-2002. In: 10th European Real Estate Conference, Helsinki.

Gray, C. and Prins, M. (2003) Value through design. In: CIB W96 Architectural Management, Reading 2001, Rotterdam.

Gray, C. and Bowman, N. (2003) A review of the use of demonstration projects to achieve widespread adoption of innovative practices. In: Anumba, C. J. (ed.) Innovative Developments in Architecture, Engineering and Contruction. Millpress Science Publishers, Rotterdam, pp. 489-501. ISBN 9789059660083

Green, S. (2003) Technology foresight report: Progress through partnership. In: Murray, M. and Langford, D. (eds.) Construction Reports 1944-98. Wiley-Blackwell, Oxford, pp. 161-177. ISBN 9780632059287

Green, S. A. and May, S. C. (2003) Re-engineering construction: going against the grain. Building Research and Information, 31 (2). pp. 97-106. ISSN 0961-3218 doi: 10.1080/09613210301992

Hilburn, H. (2003) The Budapest Arena - an international sporting challenge. APM Yearbook 2003/2004. pp. 39-40.

Hou, J.P. and Jeronimidis, G. (2003) FEA results of Cobra II bogie in comparison with Cobra I bogie. UNSPECIFIED doi: EBG04

Hou, J.P. and Jeronimidis, G. (2003) Simulation of a composite leaf spring using finite element method. In: Computational Technologies for Virtual Product Development, Warwickshire, UK.

Hou, J.P. and Jeronimidis, G. (2003) FEA simulation of Euro-spring 200 and 700 under static loading conditions. UNSPECIFIED

Hou, J.P. and Jeronimidis, G. (2003) Testing and FEA modelling on 2nd fifth scale bogie. UNSPECIFIED doi: EBG05

Huang, C. , Fisher, N. , Suchocki, M. and Spreadborough, A. (2003) IT innovation adoption within AEC sector: Using the analytic network process. In: The International Symposium on "Advancement of Construction Management and Real Estate", Macau.

Huang, C., Fisher, N. , Spreadborough, A. and Suchocki, M. (2003) Identifying the critical factors of IT innovations adoption and implementation within construction industry. In: Second International Conference on Construction in the 21st Century (CITC-II) "Sustainability and Innovation in Management and Technology", Hong Kong.

Hughes, W. P. (2003) Comparative costs of the commercial process in different construction procurement methods. In: Joint International Symposium of CIB Working Commissions (W55; W65; W107), Singapore.

Hughes, W., Hillebrandt, P., Greenwood, D. and Kwawu, W. (2003) Developing a system for assessing the costs associated with different procurement routes in the construction industry. In: Uwakweh, B. O. and Minkarah, I. A. (eds.) Construction Innovation and Global Competitiveness, Vols 1 and 2 - the Organization and Management of Construction. Crc Press-Taylor & Francis Group, Boca Raton, pp. 826-840. ISBN 0849314496

Hughes, W.P. (2003) PhD supervision in the built environment. In: Building Education and Research Conference, Salford University.

Hughes, W.P. (2003) Research tips 1: Writing a literature review. ARCOM Newsletter, 18 (1). pp. 7-8.

Hughes, W.P. (2003) Research tips 2: Writing a literature review. ARCOM Newsletter, 18 (2). p. 5.

Hughes, W.P. (2003) Review: Contracting for engineering and construction projects: Peter Marsh, 5th ed. International Journal of Project Management, 221 (3). p. 229. ISSN 0263-7863 doi: 10.1016/S0263-7863(01)00046-1

Hughes, W.P. (2003) A comparison of two editions of the RIBA plan of work. Engineering, Construction and Architectural Management, 10 (5). pp. 302-311. ISSN 0969-9988 doi: 10.1108/09699980310502919

Hughes, W.P. and Hillebrandt, P.M. (2003) Construction industry: Historical overview and technological change. In: Mokyr, J. (ed.) The Oxford Encyclopedia of Economic History. Oxford University Press, Oxford, pp. 504-512. ISBN 9780195105070

Jackson, S. (2003) A whole life design appraisal tool. In: Uwakweh, B. O. and Minkarah, I. A. (eds.) Construction Innovation and Global Competitiveness, Vols 1 and 2 - the Organization and Management of Construction. Crc Press-Taylor & Francis Group, Boca Raton, pp. 698-709. ISBN 9780849314490

Jeronimidis, G. (2003) Smart actuation from coupling between active polymer gels and fibrous structures - Can we learn from biological systems? In: Watanabe, K. and Ziegler, F. (eds.) IUTAM Symposium on Dynamics of Advanced Materials and Smart Structures. Solid Mechanics and Its Applications, 106. Springer, Dordrecht, pp. 167-176. ISBN 1402010613

John, G. A., Loy, H. M., Clements-Croome, D. J., Fairey, V. and Neale, K. (2003) A system's model for maintenance support and decision making in building services systems. In: Anumba, C. J. (ed.) Innovative Developments in Architecture, Engineering and Contruction. Millpress Science Publishers, Rotterdam, pp. 705-716. ISBN 9059660080

John, G., Loy, H., Clements-Croome, D., Fairey, V. and Neale, K. (2003) Ageing gracefully: How can a whole life support services framework enhance the life of the building services systems? In: Healthy Buildings Conference 2003, Singapore.

Lansley, P. (2003) AROUSAL comes of age. In: BEAR 2003, CIB W89 International Conference on Building Education and Research, Salford University.

Lansley, P. (2003) Ageing research has a lot to teach foresight. Research Fortnight, 9 (11). p. 21.

Lansley, P. (2003) Inclusive environments and inclusive design: New dimensions and priorities for construction research. In: BEAR 2003, CIB W89 International Conference on Building Education and Research, Salford University.

Lansley, P. (2003) Review of: Preiser, W.F.E. and Ostroff, E. Towards an inclusive society, universal design handbook, McGraw-Hill, 2001. Building Research & Information, 31 (1). pp. 70-72. ISSN 0961-3218 doi: 10.1080/0961321021000036880

Lansley, P. and Smith, V. (2003) Enhancing quality of life through engineering research. In: Include 2003, Royal College of Art, London.

Lansley, P. and Smith, V. (2003) Moving inclusive design into the main stream research agenda. In: Include 2003, Royal College of Art, London.

Larsen, G. (2003) Informal communication networks and the diffusion of innovations in UK construction projects: A research design. In: Anumba, C. J. (ed.) Innovative Developments in Architecture, Engineering and Contruction. Millpress Science Publishers, Rotterdam, pp. 503-514. ISBN 9059660080

Liu, J., Flanagan, R. and Li, Z. (2003) Why does China need risk management in its construction industry. In: Nineteenth Annual Conference of the Association of Researchers in Construction Management, University of Brighton, UK.

Milner, J. (2003) Housing quality and design: The invisible children. In: Include 2003, Roal College of Art, London.

Milner, J. (2003) The children that time forgot: Reframing housing standards to incorporate children's needs. In: Healthy Housing: Promoting Good Health Conference, Warwick University, UK.

Milner, J. and Madigan, R. (2003) Regulation and innovation: Rethinking 'inclusive' housing design. Housing Studies, 19 (5). pp. 727-744. ISSN 0267-3037 doi: 10.1080/0267303042000249170

Santulli, C. (2003) Impact damage characterisation of thermoplastic matrix composites using transmission transient thermography. Nondestructive Testing and Evaluation, 19 (3). 79 - 90. ISSN 1058-9759 doi: 10.1080/10589759310001642206

Santulli, C. (2003) Study of impact hysteresis curves on e-glass reinforced polypropylene laminates. Journal of Materials Science Letters, 22 (22). pp. 1557-1562. ISSN 0261-8028 doi: 10.1023/A:1026315920448

Santulli, C. (2003) Uso della termografia per la valutazione del danneggiamento dopo impatto di compositi e componenti automobilistici (IR Thermography for impact damage evaluation of automotive composites and components. Giornale delle Prove Non Distruttive. Monitoraggio e Diagnostica, 24 (3). pp. 27-31.

Shipworth, D. (2003) Book review: Sustainable development: Understanding the green debates. Construction Management and Economics, 21 (5). pp. 544-545. ISSN 0144-6193 doi: 10.1080/0144619032000093332

Shipworth, D. (2003) Eco-design: Reflecting a nascent field. Building Research & Information, 31 (6). pp. 489-494. ISSN 0961-3218 doi: 10.1080/0961321031000066516

Shipworth, D. (2003) Hitting emissions targets with (statistical) confidence in multi-instrument Emissions Trading Schemes. Climate Policy, 352 (Special Supplement: Defining and Trading Emission Targets). pp. 575-587. ISSN 1469-3062 doi: 10.1016/j.clipol.2003.09.007

Shipworth, D. (2003) A stochastic LCA framework for embodied greenhouse gas analysis: Integrating process and I-O data within a Bayesian graphical model. In: The International Life Cycle Assessment/Life Cycle Management 2003 conference, Seattle, USA.

Tinker, A., McCreadie, C. and Lansley, P. (2003) Introducing assistive technology into the homes of older people: Some lessons from the Netherlands - A case study. Gerontechnology, 2 (4). pp. 332-337. ISSN 1569-1101 doi: 10.4017/gt.2003.02.04.005.00

Wheal, R. , Fulford, D., Wheldon, A. and Oldach, R. (2003) Photovoltaics (PV) in Social Housing. In: Conference C79 of the Solar Energy Society, Loughborough.

Xu, X., Jeronimidis, G., Atkins, A. G. and Trusty, P. A. (2003) On the yield stress of frozen sucrose solutions. Journal of Materials Science, 38 (2). pp. 245-253. ISSN 0022-2461

Yohannes, I., Gillham, S.A., Bright, K.T. and Baldwin, S. (2003) The gaps in information provision to travellers with disabilities in London: Exploratory study report. TfL, London.

2002

Hughes, W. and Maeda, Y. (2002) Construction contract policy: do we mean what we say? RICS Research Papers, 4 (12). pp. 1-25.

1999

Hughes, W., ed. (1999) Procs. 15th annual ARCOM conference Proceedings of the fifteenth annual conference 1999, September 15-17, Liverpool John Moores University. Association of Researchers in Construction Management, Reading, pp777. ISBN 9780953416127

1998

Hughes, W., Hillebrandt, P.M. and Murdoch, J. (1998) Financial protection in the UK building industry: bonds, retentions and guarantees. Taylor & Francis, London, pp208. ISBN 9780419242901

Lingard, H., Hughes, W. and Chinyio, E. (1998) The impact of contractor selection method on transaction costs: a review. Journal of Construction Procurement, 4 (2). pp. 89-102. ISSN 1358-9180

Loosemore, M. and Hughes, W. (1998) Reactive crisis management in construction projects. Journal of Contingencies and Crisis Management, 6 (1). pp. 23-34. ISSN 1468-5973 doi: 10.1111/1468-5973.00065

1997

Hughes, W. (1997) Construction management contracts: law and practice. Engineering, Construction and Architectural Management, 4 (1). pp. 59-79. ISSN 0969-9988 doi: 10.1108/eb021040

Hughes, W., Gray, C. and Murdoch, J. (1997) Specialist trade contracting: a review. CIRIA Publications, London, pp104. ISBN 9780860174653

1996

Hughes, W. and Greenwood, D.G. (1996) The standardization of contracts for construction. International Construction Law Review, 13 (2). pp. 196-206. ISSN 0265-1416

1994

Hughes, W., Gray, C. and Murdoch, J. (1994) Construction subcontracts: for what we are about to receive. In: 7th Annual Construction Law Conference, "Risk, Management and Procurement in Construction", September 1994, Centre for Construction Law and Management, King's College London, pp. 413-442.

1993

Hughes, W. (1993) Architects as conflict managers. In: CIB W-96 Architectural Management, Practice and Research, Faculteit Bouwkunde, Technische Universiteit Eindhoven, pp. 33-39.

1987

Walker, A. and Hughes, W. (1987) A project managed by a multi disciplinary practice: a systems based case study. Construction Management and Economics, 5 (2). pp. 123-140. ISSN 0144-6193 doi: 10.1080/01446198700000012

1986

Walker, A. and Hughes, W. (1986) A conventionally managed project: a systems based case study. Construction Management and Economics, 4 (1). pp. 57-74. ISSN 0144-6193 doi: 10.1080/01446198600000004

1984

Walker, A. and Hughes, W. (1984) Private industrial project management: a systems-based case study. Construction Management and Economics, 2 (2). pp. 93-110. ISSN 1466-433X doi: 10.1080/01446198400000010