2017

Biyik, E., Araz, M., Hepbasli, A., Shahrestani, M., Yao, R., Shao, L., Essah, E., Oliveira, A. C., del Caño, T., Rico, E., Lechón, J. L., Andrade, L., Mendes, A. and Atlı, Y. B. (2017) A key review of building integrated photovoltaic (BIPV) systems. Engineering Science and Technology, an International Journal, 20 (3). pp. 833-858. ISSN 2215-0986 doi: 10.1016/j.jestch.2017.01.009

Boyd, P. and Schweber, L. (2017) Unintended Consequences: institutional artifacts, closure mechanisms and the performance gap. Building Research and Information. ISSN 1466-4321 doi: 10.1080/09613218.2017.1331096

Clements-Croome, D., Marson, M. , Yang, T. and Airaksinen, M. (2017) Planning and design scenarios for liveable cities. In: Abraham, M. A. (ed.) Encyclopedia of Sustainable Technologies. Elsevier , pp. 81-97. ISBN 9780128046777

Consoli, A., Costanzo, V., Evola, G. and Marletta, L. (2017) Refurbishing an existing apartment block in Mediterranean climate: towards the Passivhaus standard. Energy Procedia, 111. pp. 397-406. ISSN 1876-6102 doi: 10.1016/j.egypro.2017.03.201

Cook, G. and Fleck, J., (2017) Teaching and learning briefing guide - bringing inclusive design into built environment education. Report. Construction Industry Council

Costanzo, V. and Donn, M. (2017) Thermal and visual comfort assessment of natural ventilated office buildings in Europe and North America. Energy and Buildings, 140. pp. 210-223. ISSN 0378-7788 doi: 10.1016/j.enbuild.2017.02.003

Costanzo, V., Evola , G. and Marlatta, L. (2017) A review of daylighting strategies in schools: state of the art and expected future trends. Buildings, 7 (2). 41. ISSN 2075-5309 doi: 10.3390/buildings7020041

Drew, D. R., Cannon, D. J., Barlow, J. F., Coker, P. J. and Frame, T. (2017) The importance of forecasting regional wind power ramping: a case study for the UK. Renewable Energy. ISSN 0960-1481 doi: 10.1016/j.renene.2017.07.069 (In Press)

Essah, E. A., Yao, R. and Short, A. (2017) Assessing stack ventilation strategies in the continental climate of Beijing using CFD simulations. International Journal of Ventilation, 16 (1). pp. 61-80. ISSN 1473-3315 doi: 10.1080/14733315.2016.1203609

Hang, J., Luo, Z., Wang, X., He, L., Wang, B. and Zhu, W. (2017) The influence of street layouts and viaduct settings on daily carbon monoxide exposure and intake fraction in idealized urban canyons. Environmental Pollution, 220 (Part A). pp. 72-86. ISSN 0269-7491 doi: 10.1016/j.envpol.2016.09.024

Hyde, K., Smith, M. J. and Adeyeye, K. (2017) Developments in the quality of treated greywater supplies for buildings, and associated user perception and acceptance. International Journal for Low Carbon Technologies, 12 (1). pp. 136-140. ISSN 1748-1325 doi: 10.1093/ijlct/ctw006

Leong, X. W. and Essah, E. A. (2017) Bridging the gap between energy consumption and the indoor environmental quality of a 1960s-educational building. Energy Procedia. ISSN 1876-6102 (In Press)

Li, B., Yang, Y., Yao, R., Liu, H. and Li, Y. (2017) A simplified thermoregulation model of the human body in warm conditions. Applied Ergonomics, 59 (A). pp. 387-400. ISSN 0003-6870 doi: 10.1016/j.apergo.2016.09.010

Liu, G., Xiao, M., Zhang, X., Gal, C., Chen, X., Liu, L., Pan, S., Wu, J., Tang, L. and Clements-Croome, D. (2017) A review of air filtration technologies for sustainable and healthy building ventilation. Sustainable Cities and Society, 32. pp. 375-396. ISSN 2210-6707 doi: 10.1016/j.scs.2017.04.011

Liu, H., Wu, Y., Li, B., Cheng, Y. and Yao, R. (2017) Seasonal variation of thermal sensations in residential buildings in the hot summer and cold winter zone of China. Energy and Buildings, 140. pp. 9-18. ISSN 0378-7788 doi: 10.1016/j.enbuild.2017.01.066

Mohareb, E. and Hoornweg, D. (2017) Low-carbon waste management. In: Dhakal, S. and Ruth, M. (eds.) Creating Low Carbon Cities. Springer. ISBN 9783319497303 doi: 10.1007/978-3-319-49730-3

Mohareb, E., Hashemi, A., Shahrestani, M. and Sunikka-Blank, M. (2017) Retrofit planning for the performance gap: results of a workshop on addressing energy, health and comfort needs in a protected building. Energies, 10 (8). 1177. ISSN 1996-1073 doi: 10.3390/en10081177

Mudie, S. and Vahdati, M. (2017) Fat, oil and grease reduction in commercial kitchen ductwork: a novel biological approach. Waste Management, 61 (March). pp. 28-39. ISSN 0956-053X doi: 10.1016/j.wasman.2017.01.041

Shahrestani, M., Yao, R., Cook, G. K. and Clements-Croome, D. (2017) Decision-making on HVAC&R systems selection: a critical review. Intelligent Buildings International Journal. ISSN 1750-8975 doi: 10.1080/17508975.2017.1333948

Shahrestani, M., Yao, R., Essah, E., Shao, L., Oliveira, A. C., Hepbasli, A. , Biyik, E. , Caño, T. d. , Rico, E. and Lechón, J. L. (2017) Experimental and numerical studies to assess the energy performance of naturally ventilated PV façade systems. Solar Energy, 147. pp. 37-51. ISSN 0038-092X doi: 10.1016/j.solener.2017.02.034

Torriti, J. (2017) Cost–benefit analysis for energy policies. In: Bianco, V. (ed.) Analysis of Energy Systems: Management, Planning and Policy. Routledge, pp. 197-218. ISBN 9781138746176 (In Press)

Torriti, J. (2017) Understanding the timing of energy demand through time use data: time of the day dependence of social practices. Energy Research & Social Science, 25. pp. 37-47. ISSN 2214-6296 doi: 10.1016/j.erss.2016.12.004

Torriti, J. (2017) The risk of residential peak electricity demand: a comparison of five European countries. Energies, 10 (3). 385. ISSN 1996-1073 doi: 10.3390/en10030385

Wang, Y. and Shao, L. (2017) Understanding occupancy pattern and improving building energy efficiency through Wi-Fi based indoor positioning. Building and Environment, 114 (1). pp. 106-117. ISSN 0360-1323 doi: 10.1016/j.buildenv.2016.12.015

Yang, T. , Clements-Croome, D. and Marson, M. (2017) Building energy management systems. In: Abraham, M. A. (ed.) Encyclopedia of Sustainable Technologies. Elsevier, pp. 291-309. ISBN 9780128046777

Yang, X., Li, Y., Luo, Z. and Chan, P. W. (2017) The urban cool island phenomenon in a high-rise high-density city and its mechanisms. International Journal of Climatology, 37 (2). pp. 890-904. ISSN 0899-8418 doi: 10.1002/joc.4747

Yu, W., Li, B., Yao, R., Wang, D. and Li , K. (2017) A study of thermal comfort in residential buildings on the Tibetan Plateau, China. Building and Environment, 119. pp. 71-86. ISSN 0360-1323 doi: 10.1016/j.buildenv.2017.04.009

Yunusov, T., Haben, S., Lee, T., Ziel, F., Holderbaum, W. and Potter, B. (2017) Evaluating the effectiveness of storage control in reducing peak demand on low voltage feeders. In: CIRED 2017, 12-15 Jun 2017, Glasgow, UK.

Yunusov, T., Zangs, M. J., Holderbaum, W., Fila, M. and Potter, B. (2017) Online control algorithm for sub-half-hourly operation of LV-connected energy storage device owned by DNO. In: CIRED 2017, 12-15 June 2017, Glasgow, UK.

van Someren, K. L., Beaman, C. P. and Shao, L. (2017) Users’ experiences of lighting controls: a case-study. Lighting Research & Technology. ISSN 1477-1535 doi: 10.1177/1477153517709063

2016

Banani , R., Vahdati, M. M., Shahrestani, M. and Clements-Croome, D. (2016) The development of building assessment criteria framework for sustainable non-residential buildings in Saudi Arabia. Sustainable Cities and Society, 26. pp. 289-305. ISSN 2210-6707 doi: 10.1016/j.scs.2016.07.007

Cook, G., Collins, P., Deakin, M., Higgs, C., Jeal, I., Mahon, C., Platten, A., Proverbs, D., Riley, M., Sayce, S. and Williams, A., (2016) QAA Subject Benchmark Statement - Land, Construction, Real Estate and Surveying. Report. Quality Assurance Agency for Higher Education, UK.

Costanzo, V. (2016) Cool Roofs for improving thermal performance of EU office buildings: an investigation for different climates and building layouts. LAP Lambert Academic Publishing, Saarbrucken, pp172. ISBN 9783659870903

Costanzo, V., Evola, G. and Marletta, L. (2016) Energy savings in buildings or UHI mitigation? Comparison between green roofs and cool roofs. Energy and Buildings, 114. pp. 247-255. ISSN 0378-7788 doi: 10.1016/j.enbuild.2015.04.053

Costanzo, V., Evola, G. and Marletta, L. (2016) Thermal and visual performance of real and theoretical thermochromic glazing solutions for office buildings. Solar Energy Materials and Solar Cells, 149. pp. 110-120. ISSN 1879-3398 doi: 10.1016/j.solmat.2016.01.008

Daigger, G., Newell, J., Love, N., McClintock, N., Gardiner, M., Mohareb, E., Horst, M., Blesh, J. and Ramaswami, A. (2016) Scaling up agriculture in city-regions to mitigate FEW system impacts. In: “Scaling Up” Urban Agriculture to Mitigate Food-Energy-Water-Impacts”, October 5-6, 2015, University of Michigan, Ann Arbor.

Darby , H., Elmualim, A., Clements-Croome, D., Yearley, T. and Box, W. (2016) Influence of occupants’ behaviour on energy and carbon emission reduction in a higher education building in the UK. Intelligent Buildings International, 8 (3). pp. 157-175. ISSN 1750-8975 doi: 10.1080/17508975.2016.1139535

Elliston, V. and Essah, E. (2016) Assessing how retrofit of traditional buildings impacts indoor environment and occupant’s thermal comfort. In: Indoor Air Conference 2016, 4-8 July, Gent, Belgium. (In Press)

Essah, E., Kwawu, W. and Motsatsi, L. (2016) Indoor microclimate in a South Africa School: impact of indoor environmental factors. In: Indoor Air Conference 2016, 4-8 July, Gent, Belgium. (In Press)

Ghaffarianhoseini, A., Berardi, U., AlWaer, H., Chang, S., Halawa, E., Ghaffarianhoseini, A. and Clements-Croome, D. (2016) What is an intelligent building? Analysis of recent interpretations from an international perspective. Architectural Science Review, 59 (5). pp. 238-257. ISSN 0003-8628 doi: 10.1080/00038628.2015.1079164

Hashemi, A., Sunikka-Blank, M., Mohareb, E., Vahkitova, T., Dantsiou, D., Ben, H. and Shamin, T. (2016) Performance gap? Energy, health and comfort needs in buildings. In: 5th International Conference on Zero Energy Mass Customized Housing 2016, 20-23 Dec 2016, Kuala Lumpur.

Jiang, L. and Yao, R. (2016) Modelling personal thermal sensations using C-Support Vector Classification (C-SVC) algorithm. Building and Environment, 99. pp. 98-106. ISSN 0360-1323 doi: 10.1016/j.buildenv.2016.01.022

Li, X., Li, Q., Li, B. and Yao, R. (2016) An investigation on energy consumption of public buildings in Chongqing, China. In: Clima2016-Proceedings of the 12th REHVA World Congress. Aalborg University, Department of Civil Engineering, Aalborg. ISBN 8791606314

Li, Y., Yu, W., Li, B. and Yao, R. (2016) A multidimensional model for green building assessment: a case study of a highest-rated project in Chongqing. Energy and Buildings, 125. pp. 231-243. ISSN 0378-7788 doi: 10.1016/j.enbuild.2016.04.055

Medas, M., Cheshire, D., Cripps, A., Connaughton, J. and Peters, M. (2016) Uncertainty, BIM and whole life environmental impacts of building services. In: CIBSE Technical Symposium (14-15 April 2016), 14-15 April 2016, Edinburgh.

Mohareb, E., Derrible, S. and Peiravian, F. (2016) Intersections of Jane Jacobs’ conditions for diversity and low-carbon urban systems: a look at four global cities. Journal of Urban Planning and Development, 142 (2). 05015004. ISSN 1943-5444 doi: 10.1061/(ASCE)UP.1943-5444.0000287

Mudie, S., Essah, E., Grandison, A. and Felgate, R. (2016) Electricity use in the commercial kitchen. International Journal of Low Carbon Technologies, 11 (1). pp. 66-74. ISSN 1748-1325 doi: 10.1093/ijlct/ctt068

Rodriguez, A., Smith, S. T., Kiff, A. and Potter, B. (2016) Small power load disaggregation in office buildings based on electrical signature classification. In: IEEE International Energy Conference, EnergyCon, 4-8 April, Leuven, Belgium, pp. 1-6.

Rylatt, R. M., Snape, J. R., Allen, P., Ardestani, B. M., Boait, P., Boggasch, E., Fan, D., Fletcher, G., Gammon, R., Lemon, M., Pakka, V., Rynikiewicz, C., Savill, M., Smith, S., Strathern, M. and Varga, L. (2016) Exploring smart grid possibilities: a complex systems modelling approach. Smart Grid, 1 (1). pp. 1-15. ISSN 2299-1107 doi: 10.1515/sgrid-2015-0001

Smith, M. and Hyde, K. (2016) Monitoring drainage water quality during green roof irrigation trials using synthetic greywater. British Journal of Environment and Climate Change, 6 (2). pp. 138-148. ISSN 2231-4784 doi: 10.9734/BJECC/2016/18189

Thomsit-Ireland, F., Blanusa, T., Essah, E. and Hadley, P. (2016) Controlling ivy attachment to wall surfaces by applying paints, metal meshes and sheets. Journal of Living Architecture, 3 (1). pp. 1-14.

Torriti, J. (2016) Energy. In: Dunlop, C. A. and Radaelli, C. M. (eds.) Handbook of Regulatory Impact Assessment. Edward Elgar, pp. 209-228. ISBN 9781782549550

Torriti, J. (2016) Peak demand, price elasticity and intrinsic flexibility from time use activities. In: BIEE 11th Conference, 21-22 September 2016, Oxford.

Torriti, J. (2016) Peak energy demand and demand side response. Routledge Explorations in Environmental Studies. Routledge, Abingdon, pp172. ISBN 9781138016255

Torriti, J. and McGraw, T. (2016) Time of the day dependence of social practices and energy demand. In: DEMAND Conference, 13-15 April 2016, Lancaster.

Torriti, J. and Santiago, I. (2016) Simultaneous activities in the household and residential electricity demand in Spain. Time & Society. ISSN 1461-7463 doi: 10.1177/0961463X16656867

Waring, S. D. and Essah, E. A. (2016) Morphometric analysis of body and claw dimensions of building dwelling UK bat species: to aid knowledge of bat interactions with roosting surfaces. Acta Chiropterologica, 18 (2). pp. 527-534. ISSN 1508-1109 doi: 10.3161/15081109ACC2016.18.2.019

Xie, H. , Clements-Croome, D. and Wang, Q. (2016) Move beyond green building: a focus on healthy, comfortable, sustainable and aesthetical architecture. Intelligent Buildings International, 2016. ISSN 1750-8975 doi: 10.1080/17508975.2016.1139536

Yao, R., Han, S., Li, X., Shahrestani, M. and Li, B. (2016) Evaluation of building retrofit strategies in different climate zones. ASHRAE Conference Transactions 2016, 122. pp. 289-299. ISSN 2378-2129

Yao, R., Li, X., Han, S., Li, B. and Lin, C. (2016) An analysis of energy efficient retrofit strategies for office buildings in China. CIBSE Technical Symposium.

Zangs, M. J., Yunusov, T., Holderbaum, W. and Potter, B. (2016) On-line adjustment of battery schedules for supporting LV distribution network operation. In: Energy and Sustainability Conference (IESC), 2016 International, 30 Jun -1 Jul 2016, Koln, Germany.

2015

Boyd, P., Larsen, G. and Schweber, L. (2015) The co-development of technology and new buildings: incorporating building integrated photovoltaics. Construction Management and Economics, 33 (5-6). pp. 349-360. ISSN 0144-6193 doi: 10.1080/01446193.2015.1074262

Burgess, P., Vahdati, M. and Essah, E. (2015) Investigation of the accuracy of historical irradiance products and interannual variability of solar irradiance using Met Office ground data. IET Renewable Power Generation, 9 (5). pp. 405-411. ISSN 1752-1416 doi: 10.1049/iet-rpg.2014.0386

Buryk, S., Mead, D., Mourato, S. and Torriti, J. (2015) Investigating preferences for dynamic electricity tariffs: the effect of environmental and system benefit disclosure. Energy Policy, 80. pp. 190-195. ISSN 0301-4215 doi: 10.1016/j.enpol.2015.01.030

Cannon, D.J., Brayshaw, D.J., Methven, J., Coker, P.J. and Lenaghan, D. (2015) Using reanalysis data to quantify extreme wind power generation statistics : a 33 year case study in Great Britain. Renewable Energy, 75. pp. 767-778. ISSN 0960-1481 doi: 10.1016/j.renene.2014.10.024

Chatterton, J. , Parsons, D., Nicholls, J. , Longhurst, P., Bernon, M., Palmer, A., Brennan, F., Kolios, A., Wilson, I., Ishiyama, E., Clements-Croome, D., Elmualim, A. , Darby, H., Yearley, T. and Davies, G. (2015) Carbon brainprint – an estimate of the intellectual contribution of research institutions to reducing greenhouse gas emissions. Process Safety and Environmental Protection, 96 ( ). pp. 74-81. ISSN 0957-5820 doi: 10.1016/j.psep.2015.04.008

Clements-Croome, D. (2015) Creative and productive workplaces: a review. Intelligent Buildings International, 7 (4). pp. 164-183. ISSN 1750-8975 doi: 10.1080/17508975.2015.1019698

Drew, D., Cannon, D., Brayshaw, D., Barlow, J. and Coker, P. (2015) The impact of future offshore wind farms on wind power generation in Great Britain. Resources Policy, 4 (1). pp. 155-171. ISSN 0301-4207 doi: 10.3390/resources4010155

Drew, D. R., Barlow, J. F., Cockerill, T. T. and Vahdati, M. M. (2015) The importance of accurate wind resource assessment for evaluating the economic viability of small wind turbines. Renewable Energy, 77. pp. 493-500. ISSN 0960-1481 doi: 10.1016/j.renene.2014.12.032

Essah, E. and Kwawu, W. (2015) Methods to assess the effectiveness of naturally ventilated classrooms in Gauteng, South Africa. In: WABER Conference 2015, 10-12 August 2015, Legon-Accra, Ghana, pp. 799-814.

Evola, G., Marletta, L., Costanzo, V. and Caruso, G. (2015) Different strategies for improving summer thermal comfort in heavyweight traditional buildings. Energy Procedia, 78. pp. 3228-3233. ISSN 1876-6102 doi: 10.1016/j.egypro.2015.11.785

Farrelly, L. and Vernini, A. (2015) Schizophrenic urban reality: the changing urban landscapes of the Mediterranean region and developmental influences. In: Lichtenberger , A. and von Rüden, C. (eds.) Multiple Mediterranean realities: Current Approaches to Spaces, Resources, and Connectivities. Wilhelm Fink GmbH & Co. , Munchen, Germany, pp. 105-120. ISBN 9783770557400

Keeling, T. , Clements-Croome, D. and Roesch, E. (2015) The effect of agile workspace and remote working on experiences of privacy, crowding and satisfaction. Buildings, 5 (3). pp. 880-898. ISSN 2075-5309 doi: 10.3390/buildings5030880

Kubik, M. L., Coker, P. J. and Barlow, J. F. (2015) Increasing thermal plant flexibility in a high renewables power system. Applied Energy, 154. pp. 102-111. ISSN 0306-2619 doi: 10.1016/j.apenergy.2015.04.063

Li, B. and Yao, R., eds. (2015) Sustainable development in building and environment (SuDBE) 2013. Renewable Energy, 73. Elsevier. doi: 10.1016/j.renene.2014.09.016

Li, B., Luo, Z., Sandberg, M. and Liu, J. (2015) Revisiting the ‘Venturi effect’ in passage ventilation between two non-parallel buildings. Building and Environment, 92 (2). pp. 714-722. ISSN 0360-1323 doi: 10.1016/j.buildenv.2015.10.023

Luo, Z. and Christina, A. (2015) Subsurface urban heat island and its effects on horizontal ground-source heat pump potential under climate change. Applied Thermal Engineering, 90. pp. 530-537. ISSN 1359-4311 doi: 10.1016/j.applthermaleng.2015.07.025

Luo, Z., Zhao, J., Yao, R. and Shu, Z. (2015) Emergy-based sustainability assessment of different energy options for green buildings. Energy Conversion and Management, 100. pp. 97-102. ISSN 0196-8904 doi: 10.1016/j.enconman.2015.04.072

Mahyuddin , N. , Awbi, H. B. and Essah, E. A. (2015) Computational fluid dynamics modelling of the air movement in an environmental test chamber with a respiring manikin. Journal of Building Performance Simulation , 8 (5). pp. 359-374. ISSN 1940-1493 doi: 10.1080/19401493.2014.956672

Medas, M., Cheshire, D., Cripps, A., Connaughton, J. and Peters, M. (2015) Towards BIM-integrated, resource-efficient building services. In: CIBSE Technical Symposium, 16-17 April 2015, University College London.

Mohareb, E., Bristow, D. and Derrible, S. (2015) Climate change mitigation in high-income cities. In: Seto, K. C., Solecki, W. D. and Griffith, C. A. (eds.) The Routledge Handbook of Urbanization and Global Environmental Change. Routledge International Handbooks. Routledge, London, pp. 377-405. ISBN 9780415732260

Ofetotse, E., Essah, E. and Yao, R. (2015) Trends in domestic electricity consumption in Botswana. TMC Academic Journal, 9 (2). pp. 83-104. ISSN 1793-6020

Poonyth, A., Coker, P. and Torriti, J. (2015) A comparative value of electricity storage within GB market mechanisms. In: European Energy Market (EEM), 12th International Conference, 19-22 May 2015, Lisbon.

Saker, D., Vahdati, M., Coker, P. and Millward, S. (2015) Assessing the benefits of domestic hot fill washing appliances. Energy and Buildings, 93. pp. 282-294. ISSN 0378-7788 doi: 10.1016/j.enbuild.2015.02.027

Sanusi, A. N. Z., Shao, L. and Keumala, N. I. (2015) Low-energy earth–air heat exchanger cooling system for buildings in hot and humid Malaysia. In: Sayigh, A. (ed.) Renewable Energy in the Service of Mankind; Selected Topics from the World Renewable Energy Congress WREC 2014. Springer International Publishing, Switzerland, pp. 515-528. ISBN 9783319177762 doi: 10.1007/978-3-319-17777-9_46

Shahrestani, M., Yao, R., Luo, Z., Turkbeyler, E. and Davies, H. (2015) A field study of urban microclimates in London. Renewable Energy, 73. pp. 3-9. ISSN 0960-1481 doi: 10.1016/j.renene.2014.05.061

Shao, L., Foster, R., Coleman, M., Irvine, K., Lemon, M. and Hao, Y. (2015) Wireless energy behaviour monitoring (Wi-be) for office buildings. International Journal of Low-Carbon Technologies. ISSN 1748-1317 doi: 10.1093/ijlct/ctv031

Tetlow, R., van Drokelaar, C., Beaman, P., Elmualim, A. A. and Couling, K. (2015) Identifying behavioural predictors of small power electricity consumption in office buildings. Building and Environment, 92. pp. 75-85. ISSN 0360-1323 doi: 10.1016/j.buildenv.2015.04.009

Torriti, J. and Ikpe, E. (2015) Administrative costs of regulation and foreign direct investment: evidence from Standard Cost Model implementation in non-OECD countries. Review of World Economics, 151 (1). pp. 127-144. ISSN 1610-2886 doi: 10.1007/s10290-014-0200-y

Torriti, J. and Ikpe, E. (2015) Cost-benefit analysis. In: Encyclopedia of Law and Economics. Springer, pp. 1-8. ISBN 9781461478836 doi: 10.1007/978-1-4614-7883-6_124-1

Torriti, J., Hanna, R., Anderson, B., Yeboah , G. and Druckman, A. (2015) Peak residential electricity demand and social practices: Deriving flexibility and greenhouse gas intensities from time use and locational data. Indoor and Built Environment, 24 (7). pp. 891-912. ISSN 1420-326X doi: 10.1177/1420326X15600776

Varney, K. E. and Vahdati, M. M. (2015) Simulations of a photovoltaic-thermal ground source heat pump system. Proceedings of the ICE - Engineering Sustainability, 168 (1). pp. 28-37. ISSN 1751-7680 doi: 10.1680/ensu.14.00013

Yang, Y., Li, B. , Liu, H., Tan, M. and Yao, R. (2015) A study of adaptive thermal comfort in a well-controlled climate chamber. Applied Thermal Engineering, 76. pp. 283-291. ISSN 1359-4311 doi: 10.1016/j.applthermaleng.2014.11.004

Yang, Y., Yao, R., Li, B. , Liu, H. and Jiang, L. (2015) A method of evaluating the accuracy of human body thermoregulation models. Building and Environment, 87. pp. 1-9. ISSN 0360-1323 doi: 10.1016/j.buildenv.2015.01.013

Yao, R., Luo, Q., Luo, Z., Jiang, L. and Yang, Y. (2015) An integrated study of urban microclimates in Chongqing, China: historical weather data, transverse measurement and numerical simulation. Sustainable Cities and Society, 14. pp. 187-199. ISSN 2210-6707 doi: 10.1016/j.scs.2014.09.007

2014

Anable, J., Anderson, B., Shove, E. and Torriti, J., (2014) Categories, concepts and units: representing energy demand in and through time. Working Paper. DEMAND Centre, University of Lancaster. pp22.

Boyd, P., Larsen, G. D. and Schweber, L. (2014) Perspectives on the specification of Building Integrated Photovoltaic (BIPV) technology in construction projects. In: Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 153–62., 1-3 September, Portsmouth.

Cao, G., Awbi, H., Yao, R., Fan , Y., Sirénd, K., Kosonend, R. and Zhang, J. (J.) (2014) A review of the performance of different ventilation and airflow distribution systems in buildings. Building and Environment, 73 (March 2014). pp. 171-186. ISSN 0360-1323 doi: 10.1016/j.buildenv.2013.12.009

Costanzo, V., Evola, G., Marletta, L. and Gagliano, A. (2014) Proper evaluation of the external convective heat transfer for the thermal analysis of cool roofs. Energy and Buildings, 77. pp. 467-477. ISSN 0378-7788 doi: 10.1016/j.enbuild.2014.03.064

Essah, E. A. and Ofetotse, E. L. (2014) Energy supply, consumption and access dynamics in Botswana. Sustainable Cities and Society, 12. pp. 76-84. ISSN 2210-6707 doi: 10.1016/j.scs.2014.01.006

Essah, E. A. and Waring, S. D. (2014) Effect of "Pollutants" on the functionality of breathable roofing membranes in a bat roost. In: The 13th International Conference on Indoor Air Quality and Climate, 7-12 July, 2014, Hong Kong.

Essah, E. A., Rodriguez Arguelles, A. and Glover, N. (2014) Assessing the performance of a building integrated BP c-Si PV system. Renewable Energy, 73. pp. 36-45. ISSN 0960-1481 doi: 10.1016/j.renene.2014.04.002

Farrelly, L. (2014) Designing for the third age: architecture redefined for a generation of "active agers". Wiley, New York. ISBN 9781118452721

Farrelly, L. (2014) Housing from 8 to 80: an ideas project. In: Farrelly, L. (ed.) Designing for the third age: architecture redefined for a generation of "active agers". Wiley, New York, pp. 126-135. ISBN 9781118452721

Farrelly, L. (2014) Introduction: redefining reinventing realigning: design for demographic change. In: Farrelly, L. (ed.) Designing for the third age: architecture redefined for a generation of "active agers". Wiley, New York, pp. 8-13. ISBN 9781118452721

Farrelly, L. (2014) New visions: reimagining aging RIBA design competition 2013. In: Farrelly, L. (ed.) Designing for the third age: architecture redefined for a generation of "active agers". Wiley, New York, pp. 112-121. ISBN 9781118452721

Farrelly, L. and Crowson, N. (2014) Representational techniques for architecture. Basics Architecture. Bloomsbury, London, pp184. ISBN 9781472527851

Grunewald, P. and Torriti, J. (2014) Any response? How demand response could be enhanced based on early UK experience. In: European Energy Market (EEM), 2014 11th International Conference, 28-30 May 2014, Krakow.

Lee, T., Yao, R. and Coker, P. (2014) An analysis of UK policies for domestic energy reduction using an agent based tool. Energy Policy, 66. pp. 267-279. ISSN 0301-4215 doi: 10.1016/j.enpol.2013.11.004

Li, B., Yao, R., Wang, Q. and Pan , Y. (2014) An introduction to the Chinese Evaluation Standard for the indoor thermal environment. Energy and Buildings, 82. pp. 27-36. ISSN 0378-7788 doi: 10.1016/j.enbuild.2014.06.032

Lin, M., Hang, J., Li, Y., Luo, Z. and Sandberg, M. (2014) Quantitative ventilation assessments of idealized urban canopy layers with various urban layouts and the same building packing density. Building and Environment, 79. pp. 152-167. ISSN 0360-1323 doi: 10.1016/j.buildenv.2014.05.008

Luo, Z., Li, B., Sandberg, M. and Liu, J. (2014) Ventilation performance in a passage between two non-parallel buildings. In: Indoor Air 2014, July 7-12, 2014, Hong Kong.

Mattioli, G., Shove, E. and Torriti, J., (2014) The timing and societal synchronisation of energy demand. Working Paper. DEMAND Working Paper

Mohareb, E. A. and Kennedy, C. A. (2014) Scenarios of technology adoption towards low-carbon cities. Energy Policy, 66. pp. 685-693. ISSN 0301-4215 doi: 10.1016/j.enpol.2013.10.070

Mohareb, E. A. and Mohareb, A. K. (2014) A comparison of greenhouse gas emissions in the residential sector of major Canadian cities. Canadian Journal of Civil Engineering, 41 (4). pp. 285-293. ISSN 0315-1468 doi: 10.1139/cjce-2013-0465

Nobile, R., Vahdati, M., Barlow, J. F. and Mewburn-Crook , A. (2014) Unsteady flow simulation of a vertical axis augmented wind turbine: a two-dimensional study. Journal of Wind Engineering and Industrial Aerodynamics, 125. pp. 168-179. ISSN 0167-6105 doi: 10.1016/j.jweia.2013.12.005

Ntshwene, K., Essah, E. and Dixon, T. (2014) Investigating the level of awareness of building assessment tools in the construction industry of Botswana. In: 30th Annual ARCOM Conference, 1-3 Sept 2014, Portsmouth, U.K., pp. 23-32.

Ofetotse, E. L., Essah, E. and Yao, R. (2014) Identifying trends in domestic electricity consumption in Botswana. In: 13th International Conference on Sustainable Energy technologies (SET2014), 25-28th August, 2014, Geneva, Switzaland.

Rawlings, J., Coker, P., Doak, J. and Burfoot, B. (2014) Do smart grids offer a new incentive for SME carbon reduction? Sustainable Cities and Society, 10. pp. 245-250. ISSN 2210-6707 doi: 10.1016/j.scs.2013.04.003

Richardson, S., Hyde, K., Connaughton, J. and Merefield, D. (2014) Service life of UK supermarkets: origins of assumptions and their impact on embodied carbon estimates. In: World Sustainable Building Conference 2014 (SB14), 28-30 October 2014, Barcelona.

Row, J. and Mohareb, E., (2014) Improving energy efficiency in Alberta’s buildings: best practices, key actors and the role of sustainable energy organizations. Technical Report. Pembina Institute , Calgary.

Santiago, I., Lopez-Rodriguez, M. A., Trillo-Montero, D., Torriti, J. and Moreno-Munoz, A. (2014) Activities related with electricity consumption in the Spanish residential sector: variations between days of the week, Autonomous Communities and size of towns. Energy and Buildings, 79. pp. 84-97. ISSN 0378-7788 doi: 10.1016/j.enbuild.2014.04.055

Shahrestani, M., Yao, R. and Cook, G. K. (2014) A review of existing building benchmarks and the development of a set of reference office buildings for England and Wales. Intelligent Buildings International Journal, 6 (1). pp. 41-64. ISSN 1750-8975 doi: 10.1080/17508975.2013.828586

Tetlow, R. M., Beaman, C. P., Elmualim, A. A. and Couling, K. (2014) Simple prompts reduce inadvertent energy consumption from lighting in office buildings. Building and Environment, 81. pp. 234-242. ISSN 0360-1323 doi: 10.1016/j.buildenv.2014.07.003

Torriti, J. (2014) Demand side management: potenzialità, barriere, politiche. In: Clô, A., Clô, S. and Boffa, F. (eds.) Riforme elettriche tra efficienza ed equità. Percorsi. il Mulino, pp. 317-335. ISBN 9788815253385

Torriti, J. (2014) People or machines? Assessing the impacts of smart meters and load controllers in Italian office spaces. Energy for Sustainable Development, 20. pp. 86-91. ISSN 0973-0826 doi: 10.1016/j.esd.2014.01.006

Torriti, J. (2014) Privatisation and cross-border electricity trade: from internal market to European Supergrid? Energy, 77 (1). pp. 635-640. ISSN 0360-5442 doi: 10.1016/j.energy.2014.09.057

Torriti, J. (2014) A review of time use models of residential electricity demand. Renewable and Sustainable Energy Reviews, 37. pp. 265-272. ISSN 1364-0321 doi: 10.1016/j.rser.2014.05.034

Torriti, J. and Grunewald, P. (2014) Demand side response: patterns in Europe and future policy perspectives under capacity mechanisms. Economics of Energy & Environmental Policy, 3 (1). pp. 87-105. ISSN 2160-5882 doi: 10.5547/2160-5890.3.1.jtor

2013

Alemanno, A., den Butter, F., Nijsen, A. and Torriti, J., eds. (2013) Better business regulation in a risk society. Springer, New York, pp328. ISBN 9781461444053 doi: 10.1007/978-1-4614-4406-0

Balila, A. and Vahdati, M. (2013) Wall materials and techniques available for low cost housing in Khartoum from a sustainability point of view. In: First International DelPHE Conference: Construction Management in Developing Countries: Education, Training, Research and Practice, March 2013, Khartoum.

Barton, J., Huang, S., Infield, D., Leach, M., Ogunkunle, D., Torriti, J. and Thomson, M. (2013) The evolution of electricity demand and the role for demand side participation, in buildings and transport. Energy Policy, 52. pp. 85-102. ISSN 0301-4215 doi: 10.1016/j.enpol.2012.08.040

Bradley, P., Leach, M. and Torriti, J. (2013) A review of the costs and benefits of demand response for electricity in the UK. Energy Policy, 312-327. pp. 312-327. ISSN 0301-4215 doi: 10.1016/j.enpol.2012.09.039

Clements-Croome, D. (2013) Consciousness, well-being and the senses. In: Ong, B. L. (ed.) Beyond Environmental Comfort. Routledge, pp. 37-46. ISBN 9780415453691

Clements-Croome, D. (2013) Environmental health and well-being in buildings. In: Clements-Croome, D. (ed.) Intelligent Buildings. ICE, pp. 43-60. ISBN 9780727757340 doi: 10.1680/ib.57340

Clements-Croome, D. (2013) Human factors. In: Clements-Croome, D. (ed.) Intelligent Buildings: An Introduction. Routledge, pp. 25-34. ISBN 9780415531139

Clements-Croome, D. (2013) Innovative futures. In: Clements-Croome, D. (ed.) Intelligent Buildings. 2nd edition. ICE, pp. 313-323. ISBN 9780727757340 doi: 10.1680/ib.57340

Clements-Croome, D. (2013) Integration of people processes and products. In: Clements-Croome, D. (ed.) Intelligent Buildings: An Introduction. Routledge, pp. 35-44. ISBN 9780415531139

Clements-Croome, D. (2013) Intelligent building management systems. In: Clements-Croome, D. (ed.) Intelligent Buildings: An Introduction. Routledge, pp. 59-66. ISBN 9780415531139

Clements-Croome, D. (2013) Intelligent, sustainable, liveable cities. In: Clements-Croome, D. (ed.) Intelligent Buildings. 2nd edition. ICE, pp. 283-303. ISBN 9780727757340 doi: 10.1680/ib.57340

Clements-Croome, D. (2013) Introduction. In: Clements-Croome, D. (ed.) Intelligent Buildings: An Introduction. Routledge, pp. 3-7. ISBN 9780415531139

Clements-Croome, D. (2013) Lessons from nature for sustainable architecture. In: Clements-Croome, D. (ed.) Intelligent Buildings. 2nd edition. ICE, pp. 25-42. ISBN 9780727757340 doi: 10.1680/ib.57340

Clements-Croome, D. (2013) Post-occupancy evaluation. In: Clements-Croome, D. (ed.) Intelligent Buildings: An Introduction. Routledge, pp. 92-95. ISBN 9780415531139

Clements-Croome, D. (2013) Sustainable healthy intelligent buildings for people. In: Clements-Croome, D. (ed.) Intelligent Buildings. 2nd edition. ICE, pp. 1-24. ISBN 9780727757340 doi: 10.1680/ib.57340

Clements-Croome, D. (2013) Tenets for planning designing and management of intelligent buildings. In: Clements-Croome, D. (ed.) Intelligent Buildings: An Introduction. Routledge, pp. 96-98. ISBN 9780415531139

Clements-Croome, D. (2013) Why does the environment matter? In: Beyond Environmental Comfort. Routledge, pp. 139-160. ISBN 9780415453691

Clements-Croome, D. (2013) Wireless sensors for monitoring people and their close environment. In: Clements-Croome, D. (ed.) Intelligent Buildings. 2nd edition. ICE, pp. 107-118. ISBN 9780727757340 doi: 10.1680/ib.57340

Coker, P., Barlow, J., Cockerill, T. and Shipworth, D. (2013) Measuring significant variability characteristics: An assessment of three UK renewables. Renewable Energy, 53. pp. 111-120. ISSN 0960-1481 doi: 10.1016/j.renene.2012.11.013

Coleman, M. J., Irvine, K. N., Lemon, M. and Shao, L. (2013) Promoting behaviour change through personalized energy feedback in offices. Building Research & Information, 41 (6). pp. 637-651. ISSN 0961-3218 doi: 10.1080/09613218.2013.808958

Cook, G. K. (2013) BS 9266:2013 Design of accessible and adaptable general needs housing. Code of practice. BSI, London. ISBN 9780580720246

Costanzo, V., Evola, G. and Marletta, L. (2013) Cool roofs for passive cooling: performance in different climates and for different insulation levels in Italy. Advances in Building Energy Research, 7 (2). pp. 155-169. ISSN 1751-2549 doi: 10.1080/17512549.2013.865556

Costanzo, V., Evola, G., Gagliano, A., Marletta, L. and Nocera, F. (2013) Study on the application of cool paintings for the passive cooling of existing buildings in Mediterranean climates. Advances in Mechanical Engineering, 5. 413675. ISSN 1687-8132 doi: 10.1155/2013/413675

Darby, H., Elmualim, A. A. and Kelly , F. (2013) A case study to investigate the life cycle carbon emissions and carbon storage capacity of a cross laminated timber, multi-storey residential building. In: Sustainable Building Conference, SB13, 23-25 April 2013, Munich, Germany. ..

Day, T., Lim, D. and Yao, R. (2013) Renewable energy for buildings. In: Yao, R. (ed.) Design and Management of Sustainable Built Environments. Springer, London, pp. 203-224. ISBN 9781447147817 doi: 10.1007/978-1-4471-4781-7_11

Essah, E., Glover, N. and Rodriguez Arguelles, A. (2013) Performance of a BP c-Si building Integrated PV system after 15years of installation. In: International Conference of SuDBE2013, 25-28 Oct 2013, Chongqing, China.

Farrelly, L. (2013) New occupancy. In: Brooker , G. and Weinthal, L. (eds.) The Handbook of Interior Architecture and Design. Bloomsbury , New York, pp. 139-151. ISBN 1847887457

Gao, J., Cao, C., Luo, Z. and Zhang, X. (2013) Inhalation exposure to particulate matter in rooms with underfloor air distribution. Indoor and Built Environment, 23 (2). pp. 236-245. ISSN 1423-0070 doi: 10.1177/1420326X13482478

Gao, J., Cao, C., Zhang, X. and Luo, Z. (2013) Volume-based size distribution of accumulation and coarse particles (PM0.1–10) from cooking fume during oil heating. Building and Environment, 59. pp. 575-580. ISSN 0360-1323 doi: 10.1016/j.buildenv.2012.10.009

Grunewald, P. and Torriti, J. (2013) Demand response from the non-domestic sector: early UK experiences and future opportunities. Energy Policy, 61. pp. 423-429. ISSN 0301-4215 doi: 10.1016/j.enpol.2013.06.051

Gulliver, S., Grzybek, H., Radosavljevic, M. and Wiafe, I. (2013) Changing building user attitude and organisational policy towards sustainable resource use in healthcare. Health Policy and Technology, 2 (2). pp. 75-84. ISSN 2211-8837 doi: 10.1016/j.hlpt.2013.03.006

Hang, J., Luo, Z., Sandberg, M. and Jian, G. (2013) Natural ventilation assessment in typical open an semi-open urban environments under various wind directions. Building and Environment, 70. pp. 318-333. ISSN 0360-1323 doi: 10.1016/j.buildenv.2013.09.002

Hyde, K. and Maradza, E. (2013) An evaluation of the theoretical potential and practical opportunity for using greywater for domestic purposes in Ghana. Journal of Cleaner Production, 60. pp. 195-200. ISSN 0959-6526 doi: 10.1016/j.jclepro.2013.05.004

Kevany, K., Siebel, M., Hyde, K., Nazer, D. and Huisingh, D. (2013) Water, women, waste, wisdom and wealth: harvesting the confluences and opportunities. Journal of Cleaner Production, 60. pp. 4-10. ISSN 0959-6526 doi: 10.1016/j.jclepro.2013.07.018

Kubik, M. L., Coker, P. J., Barlow, J. F. and Hunt, C. (2013) A study into the accuracy of using meteorological wind data to estimate turbine generation output. Renewable Energy, 51. pp. 153-158. ISSN 0960-1481 doi: 10.1016/j.renene.2012.08.084

Lee, T. and Yao, R. (2013) Incorporating technology buying behaviour into UK-based long term domestic stock energy models to provide improved policy analysis. Energy Policy, 52. pp. 363-372. ISSN 0301-4215 doi: 10.1016/j.enpol.2012.09.048

Liu, J., Yao, R. and McCloy, R. (2013) An investigation of thermal comfort adaptation behaviour in office buildings in the UK. Indoor and Built Environment, 23 (5). pp. 675-691. ISSN 1420-326X doi: 10.1177/1420326X13481048

Lowery, N. L.H., Vahdati, M. M., Potthast, R. W.E. and Holderbaum, W. (2013) Classification and fault detection methods for fuel cell monitoring and quality control. Journal of Fuel Cell Science and Technology , 10 (2). 021002. ISSN 1550-624X doi: 10.1115/1.4023565

Lubej, S. and Radosavljevic, M. (2013) Potential reduction of concrete deterioration through controlled DEF in hydrated concrete. International Journal of Physical Sciences, 8 (24). pp. 1307-1318. ISSN 1992-1950

Luo, Z. and Hang, J. (2013) Wind pressure on a single building immersed in a low-jet wind profile. In: International Conference of SuDBE2013, 25-28 Oct 2013, Chongqing, China.

López-Rodríguez, M. A., Santiago, I., Trillo-Montero, D., Torriti, J. and Moreno-Munoz, A. (2013) Analysis and modeling of active occupancy of the residential sector in Spain: an indicator of residential electricity consumption. Energy Policy, 62. pp. 742-751. ISSN 0301-4215 doi: 10.1016/j.enpol.2013.07.095

McKerracher, C. and Torriti, J. (2013) Energy consumption feedback in perspective: integrating Australian data to meta-analyses on in home displays. Energy Efficiency, 6 (2). pp. 387-405. ISSN 1570-646X doi: 10.1007/s12053-012-9169-3

Mudie, S. A., Essah, E., Grandison, A. and Felgate, R. (2013) Benchmarking energy use in licensed restaurants and pubs. In: CIBSE Technical Symposium, 11-12 April 2013, Liverpool John Moores University, Liverpool, UK.

Mudie, S. A., Essah, E., Grandison, A. and Felgate, R. (2013) Energy benchmarking in commercial kitchens. In: 11th REHVA World Congress & 8th International Conference on IAQVEC (CLIMA 2013), 16-19 June 2013, Prague, Czech Republic. (In Press)

Mudie, S., Essah, E. A., Grandison, A. and Felgate, R. (2013) Electricity use in the commercial kitchen. In: APEC conference on low carbon towns and energy storage, 25-26 May 2013, Changsha, China.

Ofetotse, E. L., Essah, E. A. and Yao, R. (2013) Domestic energy models: complexities in defining specific tools. In: International Conference of SuDBE2013, 25-28 Oct 2013, Chongqing, China.

O’Connor, J. and Torriti, J. (2013) Trust, the pharmaceutical industry and regulators. In: Alemanno, A., den Butter, F., Nijsen, A. and Torriti, J. (eds.) Better Business Regulation in a Risk Society. Springer, New York, pp. 157-172. ISBN 9781461444053 doi: 10.1007/978-1-4614-4406-0_10

Pal, A., Luo, Z. and Li, B. (2013) Effect of building gap to improve pedestrian comfort levels and ventilation. In: 12th International Conference on Sustainable Energy Technologies (SET), 26-29th August 2013, Hong Kong.

Prakobboon, N. and Vahdati, M. (2013) Review of the potential for co-firing of cassava rhizome for generating heat and power in cassava based bio-ethanol plant in Thailand. International Journal of Biomass & Renewables, 2 (2). pp. 14-22. ISSN 2289-1692

Rylatt, M., Gammon, R., Boait, P. J., Varga, L., Allen, P., Savill, M., Snape, R., Lemon, M., Ardestani, B., Pakka, V., Fletcher, G., Smith, S., Fan, D. and Strathern, M. (2013) CASCADE: An Agent Based Framework For Modeling The Dynamics Of Smart Electricity Systems. Emergence: Complexity and Organization, 15 (2). pp. 1-13. ISSN 1521-3250 (Special Issue: Complexity and the Smart Electricity Grid)

Shahrestani, M., Yao, R. and Cook, G. (2013) Characterising the energy performance of centralised HVAC&R systems in the UK. Energy and Buildings, 62. pp. 239-247. ISSN 0378-7788 doi: 10.1016/j.enbuild.2013.03.016

Shahrestani, M., Yao, R. and Cook, G. (2013) Developing new components for variable flow distribution system modelling in TRNSYS. Building Simulation, 6 (3). pp. 309-322. ISSN 1996-8744 doi: 10.1007/s12273-013-0123-x

Torriti, J. (2013) The significance of occupancy steadiness in residential consumer response to Time of Use pricing: Evidence from a stochastic adjustment model. Utilities Policy, 27. pp. 49-56. ISSN 0957-1787 doi: 10.1016/j.jup.2013.09.005

Varney, K. E. and Vahdati, M. M. (2013) Photovoltaic and solar-assisted ground-source heat pump systems. Proceedings of the ICE - Engineering Sustainability, 166 (1). pp. 32-45. ISSN 1751-7680 doi: 10.1680/ensu.11.00006

Waring, S. D., Essah, E., Gunnell, K. and Bonser, R. (2013) Double jeopardy: the potential for problems when bats interact with breathable roofing membranes in the United Kingdom. Architecture & Environment, 1 (1). pp. 1-13. ISSN 2329-2296 doi: 10.12966/ae.5.1.2013

Yao, R., ed. (2013) Design and management of sustainable built environments. Springer, London, pp432. ISBN 9781447147800

Yao, R. (2013) Sustainability in the built environment. In: Yao, R. (ed.) Design and Management of Sustainable Built Environments. Springer, pp. 1-22. doi: 10.1007/978-1-4471-4781-7_1

Yao, R. and Lim, D. (2013) Building simulation. In: Yao, R. (ed.) Design and Management of Sustainable Built Environments. Springer, London, pp. 225-252. doi: 10.1007/978-1-4471-4781-7_12

Yao, R. and Short, A. (2013) Energy efficient building design. In: Yao, R. (ed.) Design and Management of Sustainable Built Environments. Springer, London, pp. 179-202. ISBN 9781447147817 doi: 10.1007/978-1-4471-4781-7_10

Yao, R. and Steemers, K. (2013) Urban microclimates and simulation. In: Yao, R. (ed.) Design and Management of Sustainable Built Environments. Springer, London, pp. 77-97. ISBN 9781447147817 doi: 10.1007/978-1-4471-4781-7_5

Yao, R., Luo, Z., Jiang, L., Luo, Q., Yang, Y. and Gao, Y., (2013) Urban microclimates and urban heat island in Chongqing, China. Report. RICS, London.

2012

Burgess, P. A., Vahdati, M. M., Essah, E. A., Philip, S. K. and Davies, D. (2012) Development of a virtual pyranometer for performance monitoring of PV systems. In: 8th Photovoltaic Science, Applications and Technology, 2 - 4 April 2012, Northumbria University, Newcastle upon Tyne.

Burgess, P., Vahdati, M., Essah, E., Davies, D. and Phillip, S. (2012) Progress toward a virtual pyranometer for low cost performance monitoring of PV systems. In: World Renewable Energy Forum (WREF) 2012 , 13-17 May 2012, Denver, Colorado, USA.

Burzynski, R., Crane, M., Yao, R. and Becerra, V. (2012) Space heating and hot water demand analysis of dwellings connected to district heating scheme in UK. Journal of Central South University of Technology, 19 (6). pp. 1629-1638. ISSN 1005-9784 doi: 10.1007/s11771-012-1186-z

Clements-Croome, D. (2012) Sustainable built environment. In: Meyers, R. A. (ed.) Encyclopedia of sustainability science and technology. Springer. ISBN 9780387894690 (In Press)

Essah, E. (2012) Domestic cold pitched roofs in the UK: - effect of using different roof insulation materials. International Journal of Ventilation , 11 (3). pp. 281-286. ISSN 2044-4044

Gao, Y., Yao, R., Li, B., Turkbeyler, E., Luo, Q. and Short, A. (2012) Field studies on the effect of built forms on urban wind environments. Renewable Energy, 46. pp. 148-154. ISSN 0960-1481 doi: 10.1016/j.renene.2012.03.005

Grunewald, P. and Torriti, J. (2012) Demand response — a different form of distributed storage? In: International Conference on Smart Grid Technology, Economics and Policies (SG-TEP 2012), 3-4 December 2012, Nuremberg.

Hanby, V.I. and Smith, S.T. (2012) Simulation of the future performance of low-energy evaporative cooling systems using UKCP09 climate projections. Building and Environment, 55 (1). 110 - 116. ISSN 0360-1323 doi: 10.1016/j.buildenv.2011.12.018

Hanna, R., Leach , M. and Torriti, J. (2012) The impact of installer business models on the uptake of residential microgeneration in the UK: Evidence from a nation-wide survey. In: BIEE Conference: European Energy in a Challenging World: the impact of emerging markets, 19-20 Sept 2012, Oxford.

Hong, J., Johnstone, C., Torriti, J. and Leach, M. (2012) Discrete demand side control performance under dynamic building simulation: a heat pump application. Renewable Energy, 39 (1). pp. 85-95. ISSN 0960-1481 doi: 10.1016/j.renene.2011.07.042

Hou, J. and Jeronimidis, G. (2012) A novel bogie design made of glass fibre reinforced plastic. Materials and Design, 37. pp. 1-7. ISSN 0261-3069 doi: 10.1016/j.matdes.2011.12.026

Hou, J., Bonser, R. and Jeronimidis, G. (2012) Developing sensorized arm skin for an octopus inspired robot. In: 2012 IEEE International Conference on Robotics and Automation , 14-18 May 2012, St Paul, USA, pp. 3840-3845.

Hou, J., Bonser, R. and Jeronimidis, G. (2012) Developing skin analogues for a robotic octopus. Journal of Bionic Engineering, 9 (3). pp. 385-390. ISSN 1672-6529 doi: 10.1016/S1672-6529(11)60126-1

Hou, J., Wright, E., Bonser, R. H.C. and Jeronimidis, G. (2012) Development of biomimetic squid-inspired suckers. Journal of Bionic Engineering, 9 (4). pp. 484-493. ISSN 1672-6529 doi: 10.1016/S1672-6529(11)60144-3

Kennedy, C., Demoullin, S. and Mohareb, E. (2012) Cities reducing their greenhouse gas emissions. Energy Policy, 49. pp. 774-777. ISSN 0301-4215 doi: 10.1016/j.enpol.2012.07.030

Kubik, M.L., Coker, P.J. and Hunt, C. (2012) The role of conventional generation in managing variability. Energy Policy, 50. pp. 253-261. ISSN 0301-4215 doi: 10.1016/j.enpol.2012.07.010 (Special section: Past and prospective energy transitions - insights from history)

Lemes de Oliveira, F. and Farrelly, L. (2012) The regeneration of a naval city: Portsmouth. In: Ganser, R. (ed.) Parallel patterns of shrinking cities and urban growth: spatial planning for sustainable development of city regions and rural areas. Ashgate, London, pp. 245-256. ISBN 9781409427414

Li, B. and Yao, R. (2012) Building energy efficiency for sustainable development in China: challenges and opportunities. Building Research and Information, 40 (4). pp. 417-431. ISSN 0961-3218 doi: 10.1080/09613218.2012.682419 (special issue: Next challenges for energy and buildings research )

Li, B., Zheng, J., Yao, R. and Jing, S. (2012) Indoor thermal environment and thermal comfort. Chongqing University Press, China, pp. 1-226. ISBN 9787562459484

Lim, D. and Yao, R. (2012) A combined engineering and statistical model of UK domestic appliance electrical load profiles. In: The Western Load Research Association (WLRA) Spring 2012 Meeting and Conference , 7 – 9 March 2012, Boise, Idaho, USA .

Liu, J., Luo, Z., Zhao , J. and Taoyao, S. (2012) Ventilation in a street canyon under diurnal heating conditions. International Journal of Ventilation, 11 (2). pp. 141-154. ISSN 2044-4044

Liu, J., Yao, R. and McCloy, R. (2012) A method to weight three categories of adaptive thermal comfort. Energy and Buildings, 47 . pp. 312-320. ISSN 0378-7788 doi: 10.1016/j.enbuild.2011.12.007

Liu, J., Yao, R., Wang, J. and Li , B. (2012) Occupants’ behavioural adaptation in workplaces with non-central heating and cooling systems. Applied Thermal Engineering, 35 . pp. 40-54. ISSN 1359-4311 doi: 10.1016/j.applthermaleng.2011.09.037

Lowery, N., Potthast, R., Vahdati, M. and Holderbaum, W. (2012) On discrimination algorithms for ill-posed problems with an application to magnetic tomography. Inverse Problems , 28 (6). 065010. ISSN 1361-6420 doi: 10.1088/0266-5611/28/6/065010

Lu, X., Clements-Croome, D. and Viljanen, M. (2012) Fractal geometry and architecture design: case study review. Chaotic Modeling and Simulation (CMSIM) . ISSN 2241-0503

Mirumachi, N. and Torriti, J. (2012) The use of public participation and economic appraisal for public involvement in large-scale hydropower projects: Case study of the Nam Theun 2 Hydropower Project. Energy Policy, 47. pp. 125-132. ISSN 0301-4215 doi: 10.1016/j.enpol.2012.04.034

Mohareb, E. and Kennedy, C. (2012) Greenhouse gas emission scenario modeling for cities using the PURGE model. Journal of Industrial Ecology, 16 (6). pp. 875-888. ISSN 1088-1980 doi: 10.1111/j.1530-9290.2012.00563.x

Mohareb, E. and Kennedy, C. (2012) Gross direct and embodied carbon sinks for urban inventories. Journal of Industrial Ecology, 16 (3). pp. 302-316. ISSN 1088-1980 doi: 10.1111/j.1530-9290.2011.00445.x

Ofetotse, E. L. and Essah, E. A. (2012) Energy overview of Botswana: generation and consumption. In: WABER Conference 2012, 24-27 July 2012, Abuja, Nigeria, pp. 1011-1021.

Peters, M., Fudge , S., Hoffman, S. M. and High-Pippert​, A. (2012) Carbon management, local governance and community engagement. Carbon Mangement, 3 (4). pp. 357-368. ISSN 1758-3004 doi: 10.4155/cmt.12.41

Peters, M., Sinclair, P. and Fudge, S. (2012) The potential for community groups to promote sustainable living. The International Journal of Interdisciplinary Social Sciences, 6 (8). pp. 35-54. ISSN 1833-1882

Porritt, S.M., Cropper, P.C., Shao, L. and Goodier, C.I. (2012) Ranking of interventions to reduce dwelling overheating during heatwaves. Energy and Buildings, 55. pp. 16-27. ISSN 0378-7788 doi: 10.1016/j.enbuild.2012.01.043

Saker, D., Millward, M., Vahdati, M. and Essah, E. (2012) Uncovering the potential of domestic demand side management to maximise the diffuions of renewable energy. In: World Renewable Energy Forum (WREF) 2012, 13 – 17 May 2012, Denver, Colorado, USA.

Shahrestani, M., Yao, R. and Cook, G. (2012) Decision making for HVAC&R system selection for a typical office building in the UK. In: ASHRAE annual conference, 23-27 June, 2012, San Antonio, TX, USA.

Short , C.A., Yao, R., Luo, G. and Li, B. (2012) Exploiting a hybrid environmental design strategy in the continental climate of Beijing. International Journal of Ventilation, 11 (2). ISSN 1473-3315

Smith, S.T. and Hanby, V.I. (2012) Methodologies for the generation of design summer years for building energy simulation using UKCP09 probabilitic climate projections. Building Service Engineering Research and Technology, 33 (1). 9 - 17. ISSN 1477-0849 doi: 10.1177/0143624411429183

Torriti, J. (2012) Demand side management for the European Supergrid: occupancy variances of European single-person households. Energy Policy, 44. pp. 199-206. ISSN 0301-4215 doi: 10.1016/j.enpol.2012.01.039

Torriti, J. (2012) Multiple-project discount rates for cost-benefit analysis in construction projects: A formal risk model for microgeneration renewable energy technologies. Construction Management and Economics, 30 (9). pp. 739-747. ISSN 0144-6193 doi: 10.1080/01446193.2012.692165

Torriti, J. (2012) ‘Nudging’ energy users: regulatory measures to address the risk of aggregate peak demand in European electricity markets. In: Regulation & Governance 2012, 27-30 June 2012, Exeter.

Torriti, J. (2012) Price-based demand side management: Assessing the impacts of time-of-use tariffs on residential electricity demand and peak shifting in Northern Italy. Energy, 44 (1). pp. 576-583. ISSN 0360-5442 doi: 10.1016/j.energy.2012.05.043

Torriti, J. (2012) Standard cost model: three different paths and their common problems. Journal of Contemporary European Research, 8 (1). pp. 90-108. ISSN 1815-347X

Torriti, J. and Leach, M. (2012) Making the least active pay: a simulation of rewards and penalties under Demand Side Participation programs. International journal of green energy, 9 (7). pp. 584-596. ISSN 1543-5083 doi: 10.1080/15435075.2011.625582

Torriti, J. and Lofstedt, R. (2012) The first five years of the EU Impact Assessment system: a risk economics perspective on gaps between rationale and practice. Journal of Risk Research, 15 (2). pp. 169-186. ISSN 1466-4461 doi: 10.1080/13669877.2011.634512

Turkbeyler, E., Yao, R., Nobile, R. , Bentham, T. and Lim, D. (2012) The impact of urban wind environments on natural ventilation. International Journal of Ventilation, 11 (1). pp. 17-28. ISSN 1473-3315

Waring, S. D. , Essah, E. E., Gunnell, K. and Bonser, R. H. C. (2012) Breathable roofing membranes and bats: interactions, outcomes and predictions. In: BSA 2012 – Proceedings of the 1st International Conference on Building Sustainability Assessment, 23-25, May 2012, Porto-Portugal.

Yang, T. and Clements-Croome, D. J. (2012) Natural ventilation in built environment. In: Meyers , R. A. (ed.) Encyclopedia of Sustainability Science and Technology. Springer, pp. 6865-6897. ISBN 9780387894690 doi: 10.1007/978-1-4419-0851-3_488

Yao, R. (2012) Towards low energy buildings - exploiting ventilation. International Journal of Ventilation, 11 (2). ISSN 1473-3315

Yao, R. and Yu, C. W. F. (2012) Towards ‘Zero-carbon homes’ – issues of thermal comfort. Indoor and Built Environment, 21 (4). pp. 483-485. ISSN 1420-326X doi: 10.1177/1420326X12453615

Yao, R., Luo, Q. and Gao, Y. (2012) Simulation of urban microclimates. In: CIBSE ASHRAE Technical Symposium, 18th and 19th April 2012, Imperial College, London UK .

Yao, R., Yang, Y. and Li, B. (2012) A holistic method to assess building energy efficiency combining D-S theory and the evidential reasoning approach. Energy Policy, 45. pp. 277-285. ISSN 0301-4215 doi: 10.1016/j.enpol.2012.02.032

Zhang, X., Zhao, X., Smith, S., Xu, J. and Yu, X. (2012) Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologies. Renewable and Sustainable Energy Reviews, 16 (1). 599 - 617. ISSN 1364-0321 doi: 10.1016/j.rser.2011.08.026

2011

Burgess, P. A., Vahdati, M. M. and Davies, D. (2011) An investigation of the impact of time of generation on carbon savings from PV systems in Great Britain. In: World Renewable Energy Congress, 8-13 May 2011, Linköping University, Sweden, pp. 2730-2737.

Burgess, P. A., Vahdati, M. M., Davies, D. and Philip, S. K. (2011) Preliminary performance monitoring of a 40kWp PV system on a commercial building. In: 7th Photovoltaic Science, Applications and Technology Conference, 6-8 April 2011, Heriot-Watt University, Edinburgh, pp. 45-48.

Cherruault , J.-Y., Hou, J., Jeronimidis, G., Mayer, R. and Chvojan , J. (2011) Testing of fibre composite leaf spring for heavy axle loads. Journal of Thermoplastic Composite Materials, 24 (1). pp. 111-132. ISSN 1530-7980 doi: 10.1177/0892705709096552

Clements-Croome, D. (2011) The interaction between the physical environment and people. In: Abdul-Wahab, S. A. (ed.) Sick Building Syndrome in Public Building and Workplaces. Springer, pp. 239-260. ISBN 9783642179181

Clements-Croome, D. J. (2011) The interaction between the physical environments and people. In: Abdul-Wahab, S. A. (ed.) Sick Building Syndrome in Public Buildings and Workplaces. Springer, pp. 239-259. ISBN 9783642179181 doi: 10.1007/978-3-642-17919-8_13

Drew, D. (2011) Analysis tools for urban wind turbines. PhD thesis, University of Reading.

Essah, E. (2011) Measurements and modelling of airflows in houses using passive sampling and HAM software. In: 9th Nordic Symposium on Building Physics, 29 May – 2 June 2011, Tampere, Finland.

Essah, E. A. (2011) Energy generation and consumption in Ghana. In: West Africa Built Environment Research (WABER) Conference, 19-21 July 2011, Accra, Ghana, pp. 391-401.

Fudge, S. and Peters, M. (2011) Behaviour change in the UK climate debate : an assessment of responsibility, agency and political dimensions. Sustainability, 3 (6). pp. 789-808. doi: 10.3390/su3060789

Hadjipanagi, S. and Essah, E. (2011) Modelling and measurements of a polycrystalline BIPV roof after ten years of installation. In: International Conference on Renewable Energy Sources and Energy Efficiency, 19-20 May 2011, Nicosia, Cyprus.

He, M., Rees, S. and Shao, L. (2011) Simulation of a domestic ground source heat pump system using a three-dimensional numerical borehole heat exchanger model. Journal of Building Performance Simulation, 4 (2). pp. 141-155. doi: 10.1080/19401493.2010.513739

Hengstberger, F., Pollard, N., Sagawa, K., Bouma, H., Halonen, L., Iwai, W., Werner, J., Cook, G. and Akashi, Y., (2011) CIE guide to increasing accessibility in light and lighting. Technical Report. CIE, Vienna, Austria . pp63.

Hou, J., Bonser, R. H. C. and Jeronimidis, G. (2011) Design of a biomimetic skin for an octopus-inspired robot - Part II: Development of the skin artefact. Journal of Bionic Engineering, 8 (3). pp. 297-304. ISSN 1672-6529 doi: 10.1016/S1672-6529(11)60033-4

Hou, J., Bonser, R. H. C. and Jeronimidis, G. (2011) Design of a biomimetic skin for an octopus-inspired robot– Part I: characterising octopus skin. Journal of Bionic Engineering. ISSN 1672-6529 doi: 10.1016/S1672-6529(11)60032-2

Kubik, M. L., Coker, P. J. and Hunt, C. (2011) Using meteorological wind data to estimate turbine generation output: a sensitivity analysis. In: World Renewable Energy Congress, 8-13 May 2011, Linkoping University, Sweden, pp. 4074-4081.

Lewis, A. and Elmualim, A. A. (2011) Development of decision support system for proactive energy and maintenance management decisions. In: Egbu, C. and Lou, E.C.W. (eds.) Proceedings 27th Annual ARCOM Conference. ARCOM, pp. 1135-1144. ISBN 9780955239052

Lewis, A., Elmualim, A. A. and Riley, D. (2011) Linking energy and maintenance management for sustainability through three American case studies. Facilities, 29 (5-6). pp. 243-254. ISSN 0263-2772 doi: 10.1108/02632771111120547

Lim, D. and Yao, R. (2011) Achieving carbon reduction from listed buildings in the UK: A case study on The Royal Academy of Engineering, London. In: 5th International Conference of WREC-Asia & SuDBE2011, 28-31 October 2011, Chongqing, China.

Lim, D. and Yao, R. (2011) A model of UK domestic appliance-use using Artificial Neural Networks. In: The AEIC Annual Load Research Conference, 7 – 10 August 2011, Alexandria, Virginia, USA .

Liu, J., Yao, R. and Li, B. (2011) Field study on thermal comfort and adaptive strategies in residential buildings in China. In: WREC-Asia & SuDBE2011, 28-31 October 2011, Chongqing, China.

Luo, Z. and Li, Y. (2011) Passive urban ventilation by combined buoyancy-driven slope flow and wall flow: Parametric CFD studies on idealized city models. Atmospheric Environment, 45 (32). pp. 1352-2310. ISSN 1352-2310 doi: 10.1016/j.atmosenv.2011.04.010

Luo, Z., Yuguo, L. and Wei-Zhen, L. (2011) Effects of urban ventilation patterns on the carbon monoxide concentration in a high-rise mega city. International Journal of Ventilation, 10 (3). pp. 239-250. ISSN 1473-3315

Mohareb, E. A., Kennedy, C. A., Harvey, L. D. D. and Pressnail, K. D. (2011) Decoupling of building energy use and climate. Energy and Buildings, 43 (10). pp. 2961-2963. ISSN 0378-7788 doi: 10.1016/j.enbuild.2011.06.032

Mohareb, E. A., MacLean, H. L. and Kennedy, C. A. (2011) Greenhouse gas emissions from waste management—assessment of quantification methods. Journal of the Air & Waste Management Association, 61 (5). pp. 480-493. ISSN 1096-2247 doi: 10.3155/1047-3289.61.5.480

Shahrestani, M. and Yao, R. (2011) An integrated dynamic whole life costing analysis for air distribution systems. In: Third International Conference on Applied Energy, 16-18 May 2011, Perugia, Italy, pp. 2907-2918.

Smith, S. T., Hanby, V.I. and Harpham, C. (2011) A probabilistic analysis of the future potential of evaporative cooling systems in a temperate climate. Energy and Buildings, 43 (2-3). 507 - 516. ISSN 0378-7788 doi: 10.1016/j.enbuild.2010.10.016

Torriti, J. (2011) The elasticity of demand is about occupancy, not prices: building European demand curves based on occupancy elasticity. In: UKERC 1st Conference of Energy and People, 20-21 Sept 2011, Oxford.

Torriti, J. (2011) The unsustainable rationality of Impact Assessment. European Journal of Law and Economics, 31 (3). pp. 307-320. ISSN 0929-1261 doi: 10.1007/s10657-010-9202-y

Torriti, J., Leach, M. and Devine-Wright, P. (2011) Demand side participation: price constraints, technical limits and behavioural risks. In: Jamasb, T. and Pollitt, M. (eds.) The Future of Electricity Demand: Customers, Citizens and Loads. Department of Applied Economics Occasional Papers (69). Cambridge University Press, Cambridge, pp. 88-105. ISBN 9781107008502

Turkbeyler , E. and Yao, R. (2011) A study on effect of built forms on urban wind environment by using CFD simulations. In: WREC-Asia & SuDBE2011, 28-31, October 2011, Chongqing, China.

Turkbeyler, E., Yao, R. and Day, T. (2011) Urban microclimate and renewable energy use in cities. In: The World Renewable Energy Congress - WREC 2011, 8-13 May 2011, Sweden, pp. 3066-3073.

Vahdati, M., Nobile, R., Barlow, J. and Mewburn-Crook, A. (2011) Dynamic stall for a Vertical Axis Wind Turbine in a two-dimensional study. In: World Renewable Energy Congress , 8-13th May 2011, Linköping University, Sweden. (Volume 15 (Wind Energy Applications) )

Volterra, C., Martin, A., Clements-Croome, D. and Sullivan, D., (2011) The challenges for the office sector over the next decade and beyond. Report. British Council for Offices, London. pp48.

Wang, N., Ding, R., Radosavljevic, M. and Sun, H. (2011) Practicing sustainability in PFI project management. In: Technology Management Conference (ITMC), 2011 IEEE International, 27-30 June 2011, Hilton San Jose, San Jose, CA, USA, pp. 717-722.

Xu, X. and Hou, J. (2011) A stress relaxation model for the viscoelastic solids based on the steady-state creep equation. Mechanics of Time-Dependent Materials, 15 (1). pp. 29-39. ISSN 1573-2738 doi: 10.1007/s11043-010-9122-9

Yao, R., Luo, Q. and Li, B. (2011) A simplified mathematical model for urban microclimate simulation. Building and Environment, 46 (1). pp. 253-265. ISSN 0360-1323 doi: 10.1016/j.buildenv.2010.07.019

Yu, J. Q. , Dang, B. , Clements-Croome, D. and Xu, S. (2011) Sustainability assessment indicators and methodology for intelligent buildings. Advanced Materials Research, 367-373. pp. 3829-3832. ISSN 1662-8985 doi: 10.4028/www.scientific.net/AMR.368-373

Zhan, C., Duan, Z., Xudong, Z., Smith, S., Jin, H. and Riffat, S. (2011) Comparative study of the performance of the M-cycle counter-flow and cross-flow heat exchangers for indirect evaporative cooling - paving the path towards sustainable cooling of buildings. Energy, 36 (12). 6790 - 6805. ISSN 0360-5442 doi: 10.1016/j.energy.2011.10.019

Zhan, C., Zhao, X., Smith, S. and Riffat, S.B. (2011) Numerical study of a M-cycle cross-flow heat exchanger for indirect evaporative cooling. Building and Environment, 46 (3). 657 - 668. ISSN 0360-1323 doi: 10.1016/j.buildenv.2010.09.011

2010

Awbi, H. B. (2010) Measurement and prediction of the effect of students activities on airborne particulate concentration in a classroom. In: 7th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, New York, USA.

Awbi, H. B. (2010) Thermal comfort assessment in a non-uniform thermal environment. In: Clima 2010, 9-12 May 2010, Antalya, Turkey.

Awbi, H. B. (2010) Ventilation for air quality and energy efficiency. In: Build4Asia, 3 June 2010, Hong Kong.

Awbi, H. B. and Mahyuddin, N. (2010) The spatial distribution of carbon dioxide in an environmental test chamber. Building and Environment, 45 (9). pp. 1993-2001. ISSN 0360-1323 doi: 10.1016/j.buildenv.2010.02.001

Becerra, V. M. and Galvão, R. K. H. (2010) Um tutorial sobre metodos pseudo-espectrais para controle otimo computacional. Sba: Controle & Automação Sociedade Brasileira de Automatica, 21 (3). pp. 224-244. ISSN 0103-1759 doi: 10.1590/s0103-17592010000300002

Bonser, R. H. C., Lingham-Soliar, T. and Wesley-Smith , J. (2010) Selective biodegradation of keratin matrix in feather rachis reveals classic bioengineering. Proceedings of the Royal Society B-Biological Science, 277 (1685). pp. 1161-1168. ISSN 0962-8452 doi: 10.1098/rspb.2009.1980

Burzynski , R., Yao, R. and Crane , M. (2010) UK Zero Carbon Homes 2016 - Exemplary Development. In: World Renewable Energy Congress XI, 25-30 September 2010, Abu Dhabi.

Clements-Croome, D. , Lu, X. and Viljanen, M. (2010) Integration of chaos theory and mathematical models in building simulation: Part I: Literature review. Automation in Construction, 19 (4). pp. 447-451. ISSN 0926-5805 doi: 10.1016/j.autcon.2010.01.002

Clements-Croome, D. , Lu, X. and Viljanen, M. (2010) Integration of chaos theory and mathematical models in building simulation: Part II: Conceptual frameworks. Automation in Construction, 19 (4). pp. 452-457. ISSN 0926-5805 doi: 10.1016/j.autcon.2010.01.003

Clements-Croome, D. (2010) Fenntartható intelligens épületek az embereknek (angol nyelvű). Magyar Epuletgepeszet, 59 (11). pp. 14-19. ISSN 1215-9913

Essah, E. A. (2010) Building integration photovoltaic module with reference to Ghana: using triple junction amorphous silicon. In: West Africa Built Environment Research (WABER) Conference, 27th-28th July 2010, Ghana, pp. 203-214.

Essah, E. A. (2010) Principles and calibration of solid phase microextraction fibre (passive sampler) for measurements of airflow and air infiltration in dwellings. International Journal of Ventilation, 9 (2). pp. 115-130. ISSN 1473-3315

Hanby, V. I., Smith, S. T. and Harpham, C. (2010) The potential for the use of evaporative cooling in the context of a changing maritime climate. In: CIB World Congress, 10-13 May 2010, Salford Quays, UK.

Kennedy, C. , Bristow, D., Derrible, S., Mohareb, E., Saneinejad, S., Stupka, R., Sugar, L., Zizzo, R. and McIntyre, B. (2010) Getting to carbon neutral: a review of best practices in infrastructure strategy. In: Bose, R. K. (ed.) Energy Efficient Cities: Assessment Tools and Benchmarking Practices. The International Bank for Reconstruction and Development, Washington, pp. 165-184. ISBN 9780821383094 doi: 10.1596/978-0-8213-8104-5

Kubik, M. L., Coker, P. J. and Hunt, C. (2010) An overview of the current status of research into adopting high levels of renewables in Ireland. In: World Renewable Energy Congress XI, 25th-30th September 2010, Abu Dhabi, UAE.

Lee, T. and Yao, R. (2010) An overview of domestic energy models and a new approach with agent based modelling. In: International Conference on Applied Energy, 16-18 May 2010, Singapore.

Li, B., Li, W., Liu, H. , Yao, R., Tan, M. , Jing, S. and Ma, X. (2010) Physiological expression of human thermal comfort to indoor operative temperature in the non-HVAC environment. Indoor and Built Environment, 19 (2). pp. 221-229. ISSN 1420-326X doi: 10.1177/1420326X10365213

Lindkvist, C. and Elmualim, A. (2010) Innovation in facilities management: from trajectories to ownership. Facilities, 28 (9/10). pp. 405-415. ISSN 0263-2772 doi: 10.1108/02632771011057161

Lindkvist, C. and Elmualim, A. (2010) An examination of actors that impact technology introduction to FM. In: 26th Annual ARCOM (Association of Researchers in Construction Management) Conference, 6-8 September, Leeds.

Liu, K. and Yao, R., eds. (2010) Intelligent pervasive spaces for working and living. International Journal of Intelligent Building, 2. Taylor & Francis Group, pp. 1-80, Guest Editors.

Liu, K. and Yao, R. (2010) Understanding pervasive intelligent space using semiotics : [guest editorial]. Intelligent Buildings International Journal, 2 (1). pp. 3-4. ISSN 1750-8975 doi: 10.3763/inbi.2009.0039

Luo, Z., Yuguo, L. and Nazaroff, W. W. (2010) Intake fraction of nonreactive motor vehicle exhaust in HongKong. Atmospheric Environment, 44 (15). pp. 1913-1918. ISSN 1352-2310 doi: 10.1016/j.atmosenv.2010.02.016

Peters, M., Fudge, S. and Sinclair, P. (2010) Mobilising community action towards a low-carbon future: Opportunities and challenges for local government in the UK. Energy Policy, 38 (12). pp. 7596-7603. ISSN 0301-4215 doi: 10.1016/j.enpol.2010.01.044

Shahrestani, M. and Yao, R. (2010) Dynamic simulation for closed loops in heating systems with decision-making support. In: Tenth REHVA world congress in sustainable energy use in building, 9-12 May 2010, Antalya, Turkey.

Speirs, J., Gross, R., Deshmukh, S., Heptonstall, P., Munuera, L., Leach, M. and Torriti, J., (2010) Building a roadmap for heat 2050 scenarios and heat delivery in the UK. Report. CHPA, London.

Taylor, S., Peacock, A., Banfill, P. and Shao, L. (2010) Reduction of greenhouse gas emissions from UK hotels in 2030. Building and Environment, 45 (6). pp. 1389-1400. ISSN 0360-1323 doi: 10.1016/j.buildenv.2009.12.001

Torriti, J. (2010) Impact Assessment and the liberalisation of the EU energy markets: evidence based policy-making or policy based evidence-making? Journal of Common Market Studies, 48 (4). pp. 1065-1081. ISSN 1468-5965 doi: 10.1111/j.1468-5965.2010.02089.x

Torriti, J. and Leach , M. (2010) Making the least active pay: rewards and penalties for Demand Side Participation programs. In: BIEE Conference: Energy in a Low Carbon Economy, 22-23 Sept 2010, Oxford.

Torriti, J. and Lofstedt, R. (2010) The role of Regulatory Impact Assessment in fighting climate change and the economic downturn: a EU-US perspective. European Journal of Risk Regulation, 1 (3). pp. 251-257. ISSN 1867-299X

Torriti, J., Hassan, M. G. and Leach, M. (2010) Demand response experience in Europe: policies, programmes and implementation. Energy, 35 (4). pp. 1575-1583. ISSN 0360-5442 doi: 10.1016/j.energy.2009.05.021

Wong, B. C.K., Lee, N., Li, Y., Chan , P. K.S., Qiu, H., Luo, Z., Lai, R. W.M., Ngai, K. L.K., Hui, D. S.C., Choi, K.W. and Yu, I. T.S. (2010) Possible role of aerosol transmission in a hospital outbreak of influenza. Clinical Infectious Diseases, 51 (10). pp. 1176-1183. ISSN 1537-6591 doi: 10.1086/656743

Yang, Y. , Li, B. and Yao, R. (2010) A method of identifying and weighting indicators of energy efficiency assessment in Chinese residential buildings. Energy Policy, 38 (12). pp. 7687-7697. ISSN 0301-4215 doi: 10.1016/j.enpol.2010.08.018

Yao, R. (2010) A generic model of Exergy Assessment of the Environmental Impact for the Building Lifecycle. International Journal of Energy and Buildings, 42 (9). pp. 1482-1490. doi: 10.1016/j.enbuild.2010.03.018

Yao, R. and Zheng, J. (2010) A model of intelligent building energy management for the indoor environment. Intelligent Buildings International, 2 (1). pp. 72-80. ISSN 1750-8975 doi: 10.3763/inbi.2009.0033

Yao, R., Ding, Y. , Li , B. and Tan, Y. (2010) Part load operation coefficient of air-conditioning system of public building. Energy and Buildings, 42 (10). pp. 1902-1907. ISSN 0378-7788 doi: 10.1016/j.enbuild.2010.05.026

Yao, R., Liua , J. and Li, B. (2010) Occupants' adaptive responses and perception of thermal environment in naturally conditioned university classrooms. Applied Energy, 87 (3). pp. 1015-1022. ISSN 0306-2619 doi: 10.1016/j.apenergy.2009.09.028

2009

Al-Waer, H. and Clements-Croome, D.J. (2009) Key performance indicators (KPIs) and priority setting in using the multi-attribute approach for assessing sustainable intelligent buildings. Building and Environment, 45 (4). pp. 799-807. ISSN 0360-1323 doi: 10.1016/j.buildenv.2009.08.019

Alshitawi, M., Awbi, H. and Mahyuddin, N. (2009) Particulate matter mass concentration (PM10) under different ventilation methods in classrooms. International Journal of Ventilation, 8 (2). pp. 93-108. ISSN 1473-3315

Alshitawi, M., Awbi, H. and Mahyuddin, N. (2009) The effect of outdoor conditions and air change rate on particulate matter (PM10) concentration in a classroom equipped with a windcatcher. In: Proceedings of ROOMVENT 2009, Busan, Korea.

Booy, D., Elmualim, A.A., Clements-Croome, D., Horner, K. and Perry, K. (2009) Effective space management for facilities management using computer-aided solutions. In: SASBE: 3rd International Conference on Smart and Sustainable Built Environments, Delft, the Netherlands.

Booy, D., Elmualim, A.A., Clements-Croome, D., Horner, K. and Perry, K. (2009) Variability in the application of space management tools for facilities managers. In: Fifth International Conference on Construction in the 21st Century: Collaboration and Integration in Engineering, Management and Technology, CITC-V, Istanbul, Turkey.

Cardellino, P., Whyte, J. and Clements-Croome, D., (2009) Research on design quality at Reading. CIBSE Schools Design Group. CIBSE

Cho, Y.J. and Awbi, H.B. (2009) Analysis of thermal plumes in a data centre hall. In: Proceedings of ROOMVENT 2009, Busan, Korea.

Cook, G. K. (2009) Domestic lighting for people with sight loss - the real provision of general and task light in 57 homes. Light & Engineering, 17 (1). pp. 32-38. ISSN 0236-2945

Cook, G. K. (2009) Domestic lighting for people with sight loss - the real provision of general and task light in 57 homes (In Russian). Cbeto Texhnka (1). pp. 32-35. ISSN 0039-7067

Cook, G.K. (2009) Design of buildings and their approaches to meet the needs of disabled people. In: BS8300:2009, Design of buildings and their approaches to meet the needs of disabled people - Code of practice. BSI, London . ISBN 97805805741

Elmualim, A. A. (2009) Utility of wind catchers for nocturnal ventilation. International Journal of Ventilation, 8 (1). pp. 85-92. ISSN 1473-3315

Elmualim, A.A. (2009) Application of digital technologies for sustainable buildings. In: ASE Annual Conference 2009, University of Reading.

Elmualim, A.A. (2009) Computer-aided facilities management (CAFM) for assisted homes. In: Intelligence in Assisted Homes, Bruges, Belgium.

Elmualim, A.A. (2009) Integrated building management systems for sustainable technologies: Design aspiration and operational shortcoming. In: International Conference on Sustainability in Energy and Buildings, Brighton, UK.

Elmualim, A.A. and Johnson, A. (2009) Application of computer-aided facilities management (CAFM) for intelligent buildings operation. Facilities, 27 (11/12). pp. 421-428. ISSN 0263-2772 doi: 10.1108/02632770910980718

Essah, E. A., Baker, P., Sanders, C. H. and Sasic Kalagasidis, A. (2009) Condensation and moisture transport in cold roofs: effect of roof underlay. Journal of Building Research and Information, 37 (2). pp. 117-128. ISSN 1466-4321 doi: 10.1080/09613210802645973

Essah, E.A., Sanders, C.H., Baker, P.H. and Kumaraperumal, A. (2009) Effects of varying ventilation, ceiling airtightness and underlay in a cold pitched roof – modelling and simulation. In: Proceedings of the 9th International Conference and Exhibition, Healthy Buildings 2009, Syracuse, NY, USA.

Hou, J. and Jeronimidis, G. (2009) Modelling and testing of a novel design of GRP bogie under static loading conditions. In: 15th International Conference on Composite Structures, Porto, Portugal.

Hyde, K., Griggs, J. and Gaze, C. (2009) Lessons learnt about water use, harvesting, recycling and drainage. In: Gaze, C. (ed.) Complying with the code for sustainable homes: Lessons learnt on the BRE Innovation Park. IHS-BRE, pp. 17-22. ISBN 9781848060647

Ivanic, A., Lubej, S. and Radosavljevic, M. (2009) Bond improvement in cementitious mortars reinforced with continuous carbon filaments. In: 1st International Conference on Concrete Technology, Tabriz, Iran.

Johnson, E.A.C., Bonser, R.H.C. and Jeronimidis, G. (2009) Recent advances in biomimetic sensing technologies. Philosophical Transacions of the Royal Society A: Mathmatical, Physical and Engineering Sciences, 367 (1893). pp. 1559-1569. ISSN 1471-2962 doi: 10.1098/rsta.2009.0005

Lim, D. and Yao, R. (2009) Impact of UK building regulations on design and thermal performance of dwellings. In: The International Conference in Sustainable Development in Building and Environment, Chongqing, China.

Lindkvist, C. and Elmualim, A. (2009) Pervasive technologies for workspace management. Journal of Facilities Management, 7 (2). pp. 98-110. ISSN 1472-5967 doi: 10.1108/14725960910952497

Lindkvist, C. and Elmualim, A.A. (2009) Developing new technology in facilities management through knowledge roles. In: 25th ARCOM Annual Conference, Nottingham, UK.

Lindkvist, C. and Elmualim, A.A. (2009) Pervasive technologies for workplace management. Journal of Facilities Management, 7 (2). pp. 98-110. ISSN 1472-5967 doi: 10.1108/14725960910952497

Liu, H. and Awbi, H.B. (2009) Performance of phase change material boards under natural convection. Building and Environment, 44 (9). pp. 1788-1793. ISSN 0360-1323 doi: 10.1016/j.buildenv.2008.12.002

Liu, M. and Yao, R. (2009) Environmental sustainability modelling with exergy methodology for building life cycle. In: The International Conference in Sustainable Development in Building and Environment, Chongqing, China.

Lu, X., Clements-Croome, D. J. and Viljanen, M. (2009) Past, present and future mathematical models for buildings (i). Intelligent Buildings International Journal, 1 (1). pp. 23-38. ISSN 1750-8975 doi: 10.3763/inbi.2009.0009

Lu, X., Clements-Croome, D. J. and Viljanen, M. (2009) Past, present and future mathematical models for buildings (ii). Intelligent Buildings International Journal, 1 (2). pp. 131-141. ISSN 1750-8975 doi: 10.3763/inbi.2009.0024

Lubej, S., Ivanic, A. and Radosavljevic, M. (2009) Hardening of concrete with a planned delayed ettringite formation. In: 1st International Conference on Concrete Technology, Tabriz, Iran.

Luo, V. (2009) Analytical solution of cold-air-drainage flow within and above forest canopy. In: 2nd International Conference on Countermeasures to Urban Heat Island Conference, Sept 21-23 2009, Berkeley, California.

Luo, Z. (2009) CO intake fraction and city ventilation rate in Hong Kong. In: Fifth International Workshop on Energy and Environment of Residential Buildings, 29-31 May, Guilin, Guangxi, China.

Luo, Z. (2009) Influence of plant canopy on katabatic winds. In: 7th International Conference on Urban Climate, 29 June - 3 July 2009, Yokohama, Japan.

Mahyuddin, N. and Awbi, H. (2009) The spatial distribution of carbon dioxide in a room. In: Proceedings of ROOMVENT 2009, Busan, Korea.

March, P., Clements-Croome, D. J. and Yao, R. (2009) Development of intelligent building in Bahrain. Journal of Centre South University, 16 (Supplement). pp. 89-94. ISSN 1005-9784

March, P., Clements-Croome, D. and Yao, R. (2009) An investigation of development of intelligent buildings in Bahrain. In: The International Conference in Sustainable Development in Building and Environment , Chongqing, China.

Pasupathy, S. A., Jeronimidis, G. and Le Moàl, V. (2009) An investigation of viscous-mediated coupling of crickets cercal hair sensors using a scaled up model. Proceedings: SPIE The International Society for Optical Engineering, 7401 (7401 0A). ISSN 0277-786X

Smith, S. T., Goodess, C. M., Hacker, J. N., Hanby, V. I., Harpham, C., Jones, P. and Wright, A. J. (2009) Influence of probabilistic climate projections on building energy simulation. In: CISBAT Conference: Renewables in a Changing Climate - from Nano to Urban, September 2009, Lausanne, Switzerland.

Torriti, J. and Löfstedt, R. (2009) EU-U.S.: to compete or to cooperate? This is an Impact Assessment question. In: Swinnen, J., Vogel, D., Marx, A., Riss, H. and Wouters, J. (eds.) Handling Global Challenges. Leuven Centre for Global Governance Studies , Leuven, pp. 38-55.

Torriti, J., Fumagalli, E. and Lo Schiavo, L. (2009) L’AIR nella pratica di una Autorità indipendente: l’esperienza dell’Autorità per l’energia elettrica e il gas di applicazione dell’AIR alla regolazione della qualità del servizio. Mercato Concorrenza Regole, 10 (2). pp. 285-321. ISSN 1590-5128

Turkbeyler, E. and Yao, R. (2009) Experimental study of urban microclimate for a building complex. In: The International Conference in Sustainable Development in Building and Environment, October 2009, Chongqing, China.

Yao, R. (2009) Tackling carbon emission reduction: adaptive behaviour of thermal comfort in buildings. Innovation and Research Focus (78).

Yao, R. and Li, B. (2009) Building and urban sustainability (editorial). Renewable Energy, 34 (9 (Special). p. 1993. ISSN 0960-1481 doi: 10.1016/j.renene.2009.02.001

Yao, R. and Steemers, K. (2009) Overview of an innovative EU-China collaboration in education and research in sustainable built environment. Renewable Energy, 34 (9 (Special). pp. 2080-2087. ISSN 0960-1481 doi: 10.1016/j.renene.2009.02.005

Yao, R. and Steemers, K. (2009) Urbanisation and its impact on building energy consumption and efficiency in China. Renewable Energy, 34 (9 (Special). pp. 1994-1998. ISSN 0960-1481 doi: 10.1016/j.renene.2009.02.015

Yao, R., Li, B. and Liu, J. (2009) A theoretical adaptive model of thermal comfort – Adaptive Predicted Mean Vote (aPMV). Building and Environment, 44 (10). pp. 2089-2096. ISSN 0360-1323 doi: 10.1016/j.buildenv.2009.02.014

Yao, R., Li, B., Steemers, K. and Short, A. (2009) Assessing the natural ventilation cooling potential of office buildings in different climate zones in China. Renewable Energy, 34 (12). pp. 2697-2705. ISSN 0960-1481 doi: 10.1016/j.renene.2009.05.015

Zheng, J., Zhang, Y. and Yao, R. (2009) Impact of indoor thermal comfort on physiological parameters of human body. In: The International Conference in Sustainable Development in Building and Environment , Chongqing, China.

2008

Alshitawi, M., Awbi, H. and Mahyuddin, N. (2008) A study of PM10 concentration under different ventilation systems in a classroom. In: Indoor Air 2008, Copenhagen, Denmark.

Awbi, H.B. (2008) Assessing the performance of room air distribution systems. In: Conference on Efficient Buildings, Faro, Portugal, pp. 1-8.

Cho, Y. J., Awbi, H. B. and Karimipanah, T. (2008) Theoretical and experimental investigation of wall confluent jets ventilation and comparison with wall displacement ventilation. Building and Environment, 43 (6). pp. 1091-1100. ISSN 0360-1323 doi: 10.1016/j.buildenv.2007.02.006

Clements-Croome, D. J. (2008) Work performance, productivity and indoor air. Scandinavian Journal of Work Environment & Health (Supplement). pp. 69-78. ISSN 0355-3140

Clements-Croome, D. J., Awbi, H.B., Bakó-Biró, Z., Kochhar, N. and Williams, M. (2008) Ventilation rates in schools and pupil’s performance using computerized assessment tests. Building and Environment, 43 (3). pp. 362-367. ISSN 0360-1323 doi: 10.1016/j.buildenv.2006.03.018

Clements-Croome, D., Lu, X. S. and ViIjanen, M. (2008) A perspective on chaos theory: Potential applications to intelligent buildings. In: Liu, J. J., Zhang, T. F. and Zhai, Z. Q. (eds.) First International Conference on Building Energy and Environment, Proceedings Vols 1-3. Dalian Univ Technol Press, Dalian, pp. 1811-1818. ISBN 9780981688169

Clements-Croome, D., Lu, X. and Viljanen, M. (2008) A perspective on chaos theory: potential application to intelligent buildings. In: COBEE, In: Proc. 1st International Conference on Building Energy and Environment, Dalian, China.

Cook, G., (2008) BS8493: Light reflectance value (LRV) of a surface - Method of test. British Standard 8493. British Standards Institution, London .

Cook, G. (2008) Housing for people with sight loss. In: Goodman, C. (ed.) Housing for People with Sight Loss: A Thomas Pocklington Design Guide. BRE Press. ISBN 9781848060296

Cook, G. (2008) Illuminazione ad hoc per disabilita visive (In Italian by Fortunato, I.). Luce E Design, 19. pp. 10-12.

Elmualim, A. A. and Johnson, A. (2008) Computer-aided facilities management (CAFM) of intelligent buildings: Concepts and opportunities. In: CIB 70 International Conference in Facilities Management, Herriot Watt University, Edinburgh.

Freewan, A.A., Shao, L. and Riffat, S. (2008) Optimizing performance of the lightshelf by modifying ceiling geometry in highly luminous climates. Solar Energy, 82 (4). pp. 343-353. ISSN 0038-092X doi: 10.1016/j.solener.2007.08.003

Goswami, L., Dunlop, J. W. C., Jungnikl, K., Eder, M., Gierlinger, N., Coutand, C., Jeronimidis, G., Fratzl, P. and Burgert, I. (2008) Stress generation in the tension wood of poplar is based on the lateral swelling power of the G-layer. Plant Journal, 56 (4). pp. 531-538. ISSN 0960-7412 doi: 10.1111/j.1365-313X.2008.03617.x

Karimipanah, T., Awbi, H.B. and Moshfegh, B. (2008) The air distribution index as an indicator for energy consumption and performance of ventilation systems. Journal of the Human-Environmental System, 11 (2). pp. 77-84. ISSN 1345-1324 doi: 10.1618/jhes.11.77

Lu, X. S., Clements-Croome, D. and Viljanen, M. (2008) A study on intelligent building models. In: Liu, J. J., Zhang, T. F. and Zhai, Z. Q. (eds.) First International Conference on Building Energy and Environment, Proceedings Vols 1-3. Dalian Univ Technol Press, Dalian, pp. 1803-1810. ISBN 9780981688169

Lu, X., Clements-Croome, D. J. and Viljanen, M. (2008) A study on intelligent building models. In: COBEE, In: Proc. 1st International Conference on Building Energy and Environment, Dalian, China, pp. 1944-1951.

Luo, Q., Li, B., Yao, R. and Ding, Y. (2008) Math model and case study on outdoor thermal environment of urban architectural complexity based on image process. Acta Energiae Solaris Sinica, 5. pp. 630-636. ISSN 0254-0096

Luo, Z. (2008) Effect of mountain breeze in ventilating the city under calm and neutral atmospheric environment: Interaction of airflow structures and ventilation efficiency. In: 13th Mountain Meteorology Conference, 11-14 Aug, Whistler, Canada.

Luo, Z. (2008) Surrounding buildings and wind pressure distribution on a high-rise building. In: 9th International Symposium on Building and Urban Environmental Engineering, 7-10 July, Hong Kong.

Mahyuddin, N., Awbi, H. and Alshitawi, M. (2008) Investigating carbon dioxide in high occupancy buildings with particular application to classrooms. In: Indoor Air 2008, Copenhagen, Denmark.

Phillips, T., Gilchrist, R. and Cook, G. (2008) Inclusive, accessible, archaeology. Access by Design (116). pp. 23-27. ISSN 0959-1591

Seidel, R., Gourrier, A., Burghammer, M., Riekel, C., Jeronimidis, G. and Paris, O. (2008) Mapping fibre orientation in complex-shaped biological systems with micrometre resolution by scanning X-ray microdiffraction. Micron, 39 (2). pp. 198-205. ISSN 0968-4328 doi: 10.1016/j.micron.2007.02.004

Torriti, J., (2008) Does the Impact Assessment on the ‘Third Package’ provide the correct economic forecast for the liberalisation of the EU energy markets? EUI RSCAS. 2008/14. Working Paper. Florence School of Regulation, Florence. ISBN 1028-3625

Torriti, J. (2008) Impact Assessments and emerging technologies: from precaution to "Smart Regulation"? In: Einsiedel, E. (ed.) Emerging Technologies: from Hindsight to Foresight. University of British Columbia Press, pp. 289-307. ISBN 9780774815482

Torriti, J. (2008) Italy. In: Frick, F. and Ernst, T. (eds.) International Regulatory Reform Report 2008. Verlag Bertelsmann Stiftung, Gütersloh, pp. 46-60. ISBN 9783867930031

Torriti, J. (2008) The Netherlands. In: Frick, F. and Ernst, T. (eds.) International Regulatory Reform Monitor 2008. Verlag Bertelsmann Stiftung, Gütersloh, pp. 61-86. ISBN 9783867930031

Torriti, J. (2008) United Kingdom. In: Frick, F. and Ernst, T. (eds.) International Regulatory Reform Monitor 2008. Verlag Bertelsmann Stiftung, Gütersloh, pp. 87-110. ISBN 9783867930031

Torriti, J. (2008) A review of the European Commission’s Impact Assessment for the Third Legislative Package on Energy Markets Liberalisation. In: EEM 2008: 5th International Conference on European Electricity Market, 28-30 May 2008, Lisbon, Portugal.

Turner, W. and Awbi, H. (2008) Performance testing of a hybrid ventilator under real weather conditions. In: Indoor Air 2008, Copenhagen, Denmark.

Wanga, L. and Jeronimidis, G. (2008) Investigation of the fracture mode for hard and soft wheat endosperm using the loading-unloading bending test. Journal of Cereal Science, 48 (1). pp. 193-202. ISSN 0733-5210 doi: 10.1016/j.jcs.2007.09.004

Yang, Y., Li, B. and Yao, R. (2008) A method of weighting indicators in building energy efficiency assessment. In: PLEA 2008 - 25th Conference on Passive and Low Energy Architecture, Dublin.

Yao, R., Liu, M., Li, B., Steemers, K., Heiselberg, P. and Guedes, M.C. (2008) Green building best practices. Chongqing University Press (in Chinese). ISBN 9787562443957

Yao, R., Yang, Y. and Li, B. (2008) A method of assessing indoor environment quality using evidential reasoning approach. In: World Renewable Energy Congress X, Glasgow, Scotland.

2007

Ardehali, M. M. , Shahrestani, M. and Adams, C. C. (2007) Energy simulation of solar assisted absorption system and examination of clearness index effects on auxiliary heating. Energy Conversion and Management, 48 (3). pp. 864-870. ISSN 0196-8904 doi: 10.1016/j.enconman.2006.08.012

Awbi, H.B., ed. (2007) Ventilation systems- Design and performance. Taylor & Francis, pp464. ISBN 9780419217008

Bradon, J. E., Chaplin, C. R. and Ermolaeva, N. S. (2007) Modelling the cabling of rope systems. Engineering Failure Analysis, 14 (5). pp. 920-934. ISSN 1350-6307 doi: 10.1016/j.engfailanal.2006.11.032

Cardellino, P. and Clements-Croome, D. (2007) Design quality in schools: Identifying suitable procurement and briefing processes. In: Proceedings of Clima 2007 Well-Being Indoors, Helsinki.

Chaplin, C.R., Bradon, J.E. and Ridge, I.M.L. (2007) Modelling fatigue damage distribution to inform slip and cut policy for riser tensioner ropes. In: OIPEEC Conference: ‘How to get the most out of your ropes’, Johannesburg, pp. 15-26.

Chen, Z. and Clements-Croome, D. (2007) An intelligent decision support system for the design and construction of building envelopes. In: Clima 2007 WellBeing Indoors, Helsinki.

Chen, Z., Clements-Croome, D. J., Hong, J., Li, H. and Xu, Q. (2007) The closure of "A multicriteria lifespan energy efficiency approach to intelligent building assessment". Energy and Buildings, 39 (4). pp. 506-507. ISSN 0378-7788 doi: 10.1016/j.enbuild.2007.01.002

Cho, Y. and Awbi, H. B. (2007) A study of the effect of heat source location in a ventilated room using multiple regression analysis. Building and Environment, 42 (5). pp. 2072-2082. ISSN 0360-1323 doi: 10.1016/j.buildenv.2006.03.008

Clements-Croome, D. J. (2007) A triz based value management process for selecting façade solutions. The Value Manager, 13 (2). pp. 3-8. ISSN 1029-0982

Clements-Croome, D., Wu, S. and John, G. (2007) High-quality building services based on whole-life value. University of Reading, pp55. ISBN 9780704998865

Clements-Croome, D.J. (2007) Challenges and opportunities for intelligent buildings in the 21st Century. Magyar Epületgépészet, 3 (11). doi: 10.1049/ic.2009.0222

Cook, G. K., Le Scoullier, S. and Booy, D. A. (2007) Innovation in light reflectance value - measurement and application. In: 26th Session of the CIE, 4-11 July 2007, Beijing, China, pp. 130-133.

Dunn, P.D., Burton, J.D., Xu, X. and Atkins, A. G. (2007) Paths swept out by initially slack flexible wires when cutting soft soliods; when passing through a very viscous medium; and during regelation. Proceedings of the Royal Society A, 463. pp. 1-20. ISSN 01364-502

Dutton, S. and Shao, L. (2007) Raytracing simulation for predicting light pipe transmittance. International Journal of Low Carbon Technologies, 2 (4). pp. 339-358. ISSN 1748-1325 doi: 10.1093/ijlct/2.4.339

Hou, J. P., Cherruault, J. Y., Nairne, I., Jeronimidis, G. and Mayer, R. M. (2007) Evolution of the eye-end design of a composite leaf spring for heavy axle loads. Composite Structures, 78 (3). pp. 351-358. ISSN 0263-8223 doi: 10.1016/j.compstruct.2005.10.008

Jiang, D., Bibas, A., Santuli, C., Donnelly, N., Jeronimidis, G. and O'Connor, A. F. (2007) Equivalent noise level generated by drilling onto the ossicular chain as measured by laser Doppler vibrometry: A temporal bone study. Laryngoscope, 117 (6). pp. 1040-1045. ISSN 0023-852X doi: 10.1097/MLG.0b013e3180459a10

Karimipanah, T., Awbi, H.B., Sandberg, M. and Blomqvist, C. (2007) Investigation of air quality, comfort parameters and effectiveness for two floor-level air supply systems in classrooms. Building and Environment, 42 (2). pp. 647-655. ISSN 0360-1323 doi: 10.1016/j.buildenv.2005.10.016

Li, B., Liu, J. and Yao, R. (2007) Investigation and analysis on classroom thermal environment in winter in Chongqing. Journal of Heating Ventilation & Air Conditioning. pp. 115-117. ISSN 1002-8501

Li, B., Yao, R. and Luo, Q. (2007) Image processing method in urban buildings solar energy design. Journal of Chongqing University. ISSN 1000-582X

Liang, J., Li, B. Z., Wu, Y. and Yao, R. M. (2007) An investigation of the existing situation and trends in building energy efficiency management in China. Energy and Buildings, 39 (10). pp. 1098-1106. ISSN 0378-7788 doi: 10.1016/j.enbuild.2006.12.002

Liu, M., Li, B. Z. and Yao, R. M. (2007) Building operational energy consumption of Chongqing and its exergy assessment. Journal of Central South University of Technology, 14. pp. 186-190. ISSN 2227-5223

Luo, Z. (2007) Predicting natural ventilation in a two-zone building driven by combined forces. In: Building Simulation, Beijing.

Luo, Z., Zhao, J., Gao, J. and He, L. (2007) Estimating natural-ventilation potential considering both thermal comfort and IAQ issues. Building and Environment, 42 (6). pp. 2289-2298. ISSN 0360-1323 doi: 10.1016/j.buildenv.2006.04.024

Mahyuddin, N. and Awbi, H. B. (2007) Developing a method to characterize indoor environmental parameters in naturally ventilated classrooms. In: Braganca, L., Pinheiro, M., Jalali, S., Mateus, R., Amoeda, R. and Guedes, M. C. (eds.) Portugal Sb07 - Sustainable Construction, Materials and Practices: Challenge of the Industry for the New Millennium, Pts 1 and 2. I O S Press, Amsterdam, pp. 411-417. ISBN 9781586037857

Mao, W., Clements-Croome, D. and Mao, L. (2007) A sense diary system for intelligent buildings. In: Proc of Clima 2007 WellBeing Indoors, Helsinki.

Mohareb, E. and Mittal, G. S. (2007) Formulation and process conditions for biodegradable/edible soy-based packaging trays. Packaging Technology and Science, 20 (1). pp. 1-15. ISSN 08943214 doi: 10.1002/pts.736

Nielsen, P.V., Allard, F., Awbi, H.B., Davidson, L. and Schälin, A. (2007) Computational fluid dynamics in ventilation design. REHVA Guide Book 10. RHEVA (Federation of European Heating and Air-Conditioning Association), Brussels. ISBN 9782960046892

Noy, P., Liu, K. and Clements-Croome, D. (2007) Using semiotics to understand the interplay between people and buildings. In: Proc of Clima 2007 WellBeing Indoors, Helsinki.

Smith, S. T., Wu, S. and Riffat, S. (2007) Case Study: Method of investigation of a commercial building's comfort levels. Highlighting energy efficiency concerns. In: 6th International Conference on Sustainable Energy Technologies, Santiago Chile.

Tamás, G., Clements-Croome, D. and Wu, S. (2007) The use of wireless data communication and body sensing devices to evaluate occupants' comfort in buildings. In: Clima 2007 WellBeing Indoors, Helsinki.

Torriti, J. (2007) Impact Assessment in the EU: a tool for better regulation, less regulation or less bad regulation? Journal of Risk Research, 10 (2). pp. 239-276. ISSN 1466-4461 doi: 10.1080/13669870701217847

Torriti, J. (2007) The Standard Cost Model: when better regulation fights against red-tape. In: Weatherill, S. (ed.) Better Regulation. Studies of the Oxford Institute of European and Comparative Law (6). Hart, Oxford, pp. 83-106. ISBN 9781841137155

Turner, W. and Awbi, H. (2007) Hybrid ventilation for cooling application. In: ROOMVENT 2007, Helsinki.

Wu, S. and Clements-Croome, D. (2007) Burn-in policies for products having dormant states. Reliability Engineering & System Safety, 92 (3). pp. 278-285. ISSN 0951-8320 doi: 10.1016/j.ress.2006.04.003

Wu, S. and Clements-Croome, D. (2007) Estimating the relationship among occupant behaviours and indoor environmental parameters using Bayesian networks. In: Clima 2007 Wellbeing Indoors, Helsinki.

Wu, S. and Clements-Croome, D. (2007) Understanding the indoor environment through mining sensory data - a case study. Energy and Buildings, 39 (11). pp. 1183-1191. ISSN 0378-7788 doi: 10.1016/j.enbuild.2006.07.011

Yang, Y., Li, B. and Yao, R. (2007) Policy impact on building energy efficiency: EU experiences. Journal of Heating Ventilation & Air Conditioning. ISSN 1002-8501

Yong, C.Y., Qiao, B., Wilson, D.J., Wu, M., Clements-Croome, D.J., Liu, K., Egan, R. and Guy, C.G. (2007) Coordinated management of intelligent pervasive spaces. In: Proc of the 5th IEEE International Conference on Industrial Informatics (INDIN), Vienna, Austria. doi: 10.1109/INDIN.2007.4384813

2006

Abu-Sharkh, , S., Arnold, R. J. , Kohler, J. , Li, R., Markvart , T., Ross, J. N. , Steemers, K. , Wilson , P. and Yao, R. (2006) Can microgrids make a major contribution to UK energy supply? International Journal of Renewable and Sustainable Energy Reviews, 10 (2). pp. 78-127. ISSN 1364-0321 doi: 10.1016/j.rser.2004.09.013

Atkins, A.G. (2006) Toughness & oblique metalcutting. Trans Am Soc Mech Engrs (J Manuf Sci& Engr), 128 (3). pp. 775-786. ISSN 0097-6822 doi: 10.1115/1.2164506

Bahaj, A.S., James, P.A.B., Jentsch, M.F., Clements-Croome, D.J., Chen, Z., Wu, S., Liu, K., Noy, P., Jones, K., Cooper, J. and Kaluarachchi, Y. (2006) Sustainable refurbishment: quantifying the impact of façade changes in multi-storey, multi-occupancy buildings. In: World Renewable Energy Congress IX and Exhibition, University of Florence, Florence, Italy.

Chen, Z., Clements-Croome, D., Hong, J., Li, H. and Xu, Q. (2006) A multicriteria lifespan energy efficiency approach to intelligent building assessment. Energy and Buildings, 38 (5). pp. 393-409. ISSN 0378-7788 doi: 10.1016/j.enbuild.2005.08.001

Clements-Croome, D. (2006) Challenges and opportunities for intelligent buildings in the 21(st) century. In: Hao, J. P., He, J. J. and Fan, K. X. (eds.) 2006 Xi'an International Conference of Architecture and Technology, Proceedings - Architecture in Harmony. China Architecture & Building Press, Beijing, pp. 884-897. ISBN 978711200507-9

Clements-Croome, D. (2006) Creating the productive workplace. Taylor & Francis, pp424. ISBN 9780415351386

Clements-Croome, D. (2006) Green intelligent buildings: An energy focus. In: Second International Intelligent, Green and Energy Efficient Building and Technologies and Products Conference, Beijing, pp. 397-415.

Clements-Croome, D.J., Wu, M. and Li, S.R. (2006) A sensor based intelligent building assessment model. In: Chinese Research Institute of Construction Management 2006 Annual Conference, Beijing, China, pp. 91-99.

Elmualim, A. A. (2006) Dynamic modelling of a wind catcher/tower turret for natural ventilation. Building Services Engineering Research & Technology, 27 (3). pp. 165-182. ISSN 0143-6244

Elmualim, A. A. (2006) Effect of damper and heat source on wind catcher natural ventilation performance. Energy and Buildings, 38 (8). pp. 939-948. ISSN 0378-7788 doi: 10.1016/j.enbuild.2005.11.004

Elmualim, A. A. (2006) Verification of design calculations of a wind catcher/tower natural ventilation system with performance testing in real building. International Journal of Ventilation, 4 (4). pp. 393-404. ISSN 1473-3315

Elmualim, A.A. (2006) Failure of a control strategy for a hybrid air-conditioning and wind catchers/towers system at Bluewater shopping malls in Kent. Facilities, 24 (11/12 (Spe). pp. 399-411. ISSN 0263-2772 doi: 10.1108/02632770610684882

Elmualim, A.A. and Zhang, Y. (2006) Editorial: Modelling, assessment and control of indoor air quality for FM professionals. Facilities, 24 (11/12 (Spe). ISSN 0263-2772

Goodman, T., Gibbs, D. and Cook, G., (2006) Better lighting for improved human performance, health and well being and increased energy efficiency – A scoping study for CIE-UK. National Physical Laboratory, HMSO, London.

Hong, J., Chen, Z., Li, H., Clements-Croome, D.J. and Xu, Q. (2006) A knowledgebase for the study of intelligent buildings. In: Bear 2006: Construction Sustainability and Innovation, Shangri-la Hotel, Kowloon, Hong Kong.

Li, B. , Luo, Q. and Yao, R. (2006) Image process for sunlight distribution among buildings. Acta Energiae Solaris Sinica. ISSN 0254-0096

Li, B., Luo, Q. and Yao, R. (2006) Solution on configuration factor from ground to sky. Journal of Chongqing University. ISSN 1000-582X

Luo, Z. (2006) Analysis of Direct Outdoor Air Cooling Efficency for Combined Variable Air Volume Air-conditioning System in Stores in Cold Climates of China. In: 5th International Conference on Cold Climate in Heating, Ventilation and Air-Conditioning, Moscow, Russia.

Muller, U., Gindl, W. and Jeronimidis, G. (2006) Biomechanics of a branch-stem junction in softwood. Trees-Structure and Function, 20 (5). pp. 643-648. ISSN 0931-1890 doi: 10.1007/s00468-006-0079-x

Santulli, C. and Jeronimidis, G. (2006) Development of a method fon non-destructive testing of fruits using scanning laser vibrometry (SLV). NDT.net - The e-Journal of Nondestructive Testing, 11 (10). ISSN 1435-4934

Santulli, C., Finn, T. J., Seidel, R. and Jeronimidis, G. (2006) Scanning LDV for vibration measurement of filiform hairs in crickets in response to induced airflow - art. no. 63450E. In: Tomasini, E. P. (ed.) Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications. Proceedings of the Society of Photo-Optical Instrumentation Engineers (Spie), 6345. Spie-Int Soc Optical Engineering, Bellingham, E3450-E3450. ISBN 081946421X doi: 10.1117/12.693153

Sun, S., Zhen, Z. and Clements-Croome, D. J. (2006) Planning the sustainable eco-city in Taipei: The implementation of green design and green building schemes. In: Second International Intelligent, Green and Energy Efficient Building and Technologies and Products Conference, British Papers, Beijing, pp. 448-458.

Sun, S.L., Chen, Z. and Clements-Croome, D.J. (2006) Planning the sustainable eco-city in Taipei: the implementation of green design and green building schemes. In: British Papers for IGEBC: the 2nd International Conference on Intelligent Green and Energy Efficient Buildings, Beijing, China.

Sun, S.L., Chen, Z. and Clements-Croome, D.J. (2006) The green building scheme for a sustainable eco-city in Taipei. In: 6th International Conference for Enhanced Building Operations, Shenzhen, China.

Wargocki, P., Seppänen, O., Andersson, J., Boerstra, A. and Clements-Croome, D. (2006) Indoor climate and productivity in offices: How to integrate productivity in life cycle cost analysis of buildings services. In: REHVA Guide Book No 6. Federation of European Heating and Airconditioning Associations, pp. 1-76. ISBN 2960046854

Wu, S. and Clements-Croome, D. J. (2006) Reliability design for building services. In: Second International Intelligent, Green and Energy Efficient Building and Technologies and Products Conference, Beijing, pp. 257-265.

Wu, S., Clements-Croome, D. J., Fairey, V., Neale, K., Albany, B., Sidhu, J. and Desmond, D. (2006) Reliability in the whole life cycle of building systems. Engineering, Construction and Architectural Management, 13 (2). pp. 136-153. ISSN 0969-9988 doi: 10.1108/09699980610659607

Yao, R. and Baker, N. (2006) Lighting energy saving due to the use of direct sunlight. Sustainable Built Environment and Construction. pp. 73-78.

Yao, R., Li, B. and Steemers, K. (2006) Sustainable Built Environment and Construction, Chongqing University. In: Yao, R., Li, B. and Steemers, K. (eds.) Sustainable Built Environment and Construction, Chongqing University. Chongqing University, Chongqing, pp. 1-196. ISBN 0-903248-03-4

Yao, R., Steemers, K. and Li, B. (2006) Asia-European sustainable urban development. In: International Conference on Asia-European Sustainable Urban Development.

Yao, R., Steemers, K. and Li, B. (2006) Introduction to Sustainable Urban and Architectural Design. In: Yao, R., Steemers, K. and Li, B. (eds.) Introduction to Sustainable Urban and Architectural Design. China Architectur and Building Press, China, pp. 1-272. ISBN 7-112-08099-1

2005

Atkins, A.G. (2005) Toughness & cutting: A new way of determining ductile fracture toughness and strength. Engineering Fracture Mechanics, 72 (6). pp. 849-860. ISSN 0013-7944 doi: 10.1016/j.engfracmech.2004.07.014

Atkins, A.G. and Xu, X. (2005) Slicing of soft, flexible solids with industrial applications. International Journal of Mechanical Science, 47 (4-5). pp. 479-492. ISSN 0020-7403 doi: 10.1016/j.ijmecsci.2005.01.013

Awbi, H.B. (2005) Ventilation and air movement in buildings. In: Renewable Energy Seminar, Brighton, UK.

Bonello, P., Brennan, M. J., Elliott, S. J., Vincent, J. F. V. and Jeronimidis, G. (2005) Designs for an adaptive tuned vibration absorber with variable shape stiffness element. Proceedings of the Royal Society a-Mathematical Physical and Engineering Sciences, 461 (2064). pp. 3955-3976. ISSN 1364-5021 doi: 10.1098/rspa.2005.1547

Bradon, J.E. and Chaplin, C.R. (2005) Quantifying the residual creep life of polyester mooring ropes. International Journal of Offshore and Polar Engineering, 15 (3). pp. 223-228. ISSN 1053-5381

Bradon, J.E., Ridge, I.M.L. and Chaplin, C.R. (2005) Modelling the torsional interaction of wire and polyester fibre ropes used for offshore moorings. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment , 219 (4). pp. 163-172. ISSN 2041-3084 doi: 10.1243/14750902JEME35

Chaplin, C.R. (2005) Torsional interactions between mooring line components. In: Cordage Institute Annual Technical Meeting, San Antonio, TX, USA. doi: 10.4043/12173-MS

Chaplin, C.R. (2005) The fatigue and degradation mechanisms of hoisting ropes. In: Hoist and Haul, Perth.

Chaplin, R.C. (2005) Deep water mooring: Challenges, solutions and torsion. In: Proceedings Second Internationaler Stuttgarter Seiltag , University of Stuttgart, Germany.

Chen, Z. and Clements-Croome, D. J. (2005) A multicriteria approach to intelligent building assessment. Assessment case study session. In: The 2005 World Sustainable Building Conference, Tokyo, Japan.

Chen, Z., Clements-Croome, D.J., Hong, J., Li, H., Kaluarachchi, Y., Jones, K.G., James, P.A., Jentsch, M. and Bahaj, A.S. (2005) A façade casebase for teaching and learning intelligent buildings. In: CISBAT 2005, Lausanne, Switzerland.

Chen, Z., Clements-Croome, D.J., Kaluarachchi, Y., Jones, K.G. and Hong, J. (2005) FacadeChoice: a decision-making model for innovation and environmental sustainability in the design and renovation of building envelopes. In: CISBAT 2005, Lausanne, Switzerland.

Cherruault, J., Hou, J.P., Jeronimidis, G., Chvojan, J. and Mayer, R.M. (2005) Design, manufacturing, testing and simulation of fibre composite leaf spring for heavy axle loads. In: 15th International Conference on Composite materials (ICCM15), Durban, South Africa.

Cho, Y., Awbi, H.B. and Karimipanah, T. (2005) Comparison between wall confluent jets and displacement ventilation in aspects of the spreading ration on the floor. In: 10th International Conference in Indoor Air Quality and Climate (Indoor Air 2005), Beijing, China.

Clements-Croome, D. J. (2005) Assessing performance of green intelligent buildings. In: 1st International Intelligent & Green Building Technologies and Products Conference and Expo, Beijing.

Clements-Croome, D. J., Awbi, H. B. and Williams, M. (2005) Ventilation rates in schools. In: Yang, X., Zhao, B. and Zhao, R. (eds.) Indoor Air 2005: Proceedings of the 10th International Conference on Indoor Air Quality and Climate, Vols 1-5. Tsinghua University Press, Beijing, pp. 3223-3227. ISBN 9787894948304

Clements-Croome, D.J. (2005) Designing the indoor environment for people. International Journal of Architectural Engineering and Design Management, 1 (1). pp. 45-55. ISSN 1745-2007

Clements-Croome, D.J. (2005) Natural ventilation in non-domestic buildings. In: Application Manual AM10 (Second Edition). Chartered Institution of Building Services Engineers. ISBN 9781903287569

Clements-Croome, D.J., John, G. and Wu, S. (2005) Improving the reliability and value of building services. In: CLIMA 2005, REVHA Workshop, Lausanne, Switzerland.

Cook, G. (2005) Lighting design methods for obstructed interiors. CIE Publication, 161.

Cook, G. and Bright, K. (2005) Colour and luminance contrast - What, why, how and when? Access Journal 18.

Cook, G., Gillham, S.A. , Webber, G., Le Scouiller, S.A. and Moseley, E. (2005) The legibility and conspicuity of emergency escape route signage for visually impaired people. In: Vision 2005, London.

Cook, G., Yohannes, I., Booy, D., Le Scouiller, S. and O'Neill, L.A. (2005) Lighting the homes of people who are visually impaired. In: Vision 2005, London.

Cook, G., Yohannes, I., Dalke, H. and Camgoz, N. (2005) Lighting multi-modal transport intersections for visually impaired travellers. In: 10th European Lighting Conference on Lighting for Humans, LUX EUROPA 2005, Berlin, Germany.

Cook, G.K., Yohannes, I., Booy, D.A. and Le Scouiller, S.A. (2005) Lighting homes of people who are visually impaired. In: Include 2005, Royal College of Art, London.

Cotterell, B., Pardoen, T. and Atkins, A. G. (2005) Measuring toughness and the cohesive stress-displacement relationship by the essential work of fracture concept. Engineering Fracture Mechanics, 72 (6). pp. 827-848. ISSN 0013-7944 doi: 10.1016/j.engfracmech.2004.10.002

Dalke, H., Camgoz, N., Cook, G., Yohannes, I. and Bright, K. (2005) Inclusive transport environments: colour design and visual impairment. In: Include 2005, Royal College of Art, London.

Elmualim, A. (2005) Development of a hybrid wind catcher/tower and heat convector for heating naturally ventilated spaces. In: Sustainable Building South East Asia, Kuala Lumpur, Malaysia.

Elmualim, A. (2005) Towards integrative hybrid low energy and renewable energy systems in buildings. In: World Renewable Energy Congress 2005- Innovation in Europe, Aberdeen.

Godfaurd, J., Clements-Croome, D. and Jeronimidis, G. (2005) Sustainable building solutions: a review of lessons from the natural world. Building and Environment, 40 (3). pp. 319-328. ISSN 0360-1323 doi: 10.1016/j.buildenv.2004.05.011

Hong, J., Chen, Z., Li, H., Clements-Croome, D.J. and Xu, Q. (2005) A casebase for teaching and learning intelligent buildings for sustainable built environment. In: Bear 2006: Construction Sustainability and Innovation, Hong Kong.

Hou, J. P., Cherruault, J. Y., Jeronimidis, G. and Mayer, R. (2005) Design, testing, and simulation of fibre composite leaf springs for heavy axle loads. Journal of Strain Analysis for Engineering Design, 40 (6). pp. 497-504. ISSN 0309-3247 doi: 10.1243/030932405X30704

Hou, J.P. and Jeronimidis, G. (2005) Finite element aided design evolution of composite leaf spring. Applied Mechanics and Materials, 3-4. pp. 429-434. doi: 10.4028/www.scientific.net/AMM.3-4.429

Irving, S. and Clements-Croome, D.J. (2005) Natural ventilation in non-domestic buildings. In: Application Manual AM10. Chartered Institution of Building Services Engineers. ISBN 0900953772

John, G., Loy, H. and Clements-Croome, D. (2005) Innovative approach to building systems integration problems: Using systems theory, technological forecasting and scenario planning. In: 3rd Innovation in Architecture, Engineering and Construction (AEC) Conference, Amsterdam, Netherlands.

John, G., Loy, H., Clements-Croome, D., Fairey, V. and Neale, K. (2005) Contextual prerequisites for the application of ILS principles to the building services industry. Engineering, Construction and Architectural Management, 12 (4). pp. 307-328. ISSN 0969-9988 doi: 10.1108/09699980510608794

Kaluarachchi, Y., Jones, K., James, P.A.B., Jentsch, M., Bahaj, A.S., Clements-Croome, D. and Gann, D. (2005) Building facades: Issues of sustainability, maintenance and refurbishment (SUE-IDCOP). Proceedings of Institution of Civil Engineering. ISSN 0020-3262 doi: 10.1680/ensu.158.2.89.67119

Kaluarachchi, Y., Jones, K., James, P.A.B., Jentsch, M., Bahaj, A.S., Clements-Croome, D. and Gann, D. (2005) Building facades: Issues of sustainability, maintenance and refurbishment (SUE-IDCOP). In: EPSRC SUE-IDCOP Research Fellow Conference SUE Vision into Action, University of Birmingham, 28 Feb-2 March.

Karimipanah, T., Awbi, H.B., Blomqvist, C. and Sandberg, M. (2005) Effectiveness of confluent jets ventilation system for classrooms. In: 10th International Conference in Indoor Air Quality and Climate (Indoor Air 2005), Beijing, China.

Li, B. , Liu, M., Yao, R. and Stemers, K. (2005) Sustainable urbanisation: energy and environment in Chongqing. Journal of Chongqing University. ISSN 1000-582X

Li, B., Wu, J., Zhen, J. and Yao, R. (2005) The impact on air velocity on human perspiration critical temperature in hot and humid climate. In: Clima2005, 9-12 October 2005 , Lausanne, Switzerland .

Luo, Z. (2005) Study on indoor thermal environment and air quality of office rooms controlled by personal displacement ventilation using CFD. In: Indoor Air 2005, Beijing, China .

Needham, A. J., Jiang, D., Bibas, A., Jeronimidis, G. and O'Connor, A. F. (2005) The effects of mass loading the ossicles with a floating mass transducer on middle ear transfer function. Otology & Neurotology, 26 (2). pp. 218-224. ISSN 1531-7129

Santulli, C., Janssen, M. and Jeronimidis, G. (2005) Partial replacement of E-glass fibres with flax fibres in composites and effect on falling weight impact performance. Journal of Materials Science, 40 (13). pp. 3581-3585. ISSN 0022-2461 doi: 10.1007/s10853-005-2882-y

Santulli, C., Patel, S. I., Jeronimidis, G., Davis, F. J. and Mitchell, G. R. (2005) Development of smart variable stiffness actuators using polymer hydrogels. Smart Materials & Structures, 14 (2). pp. 434-440. ISSN 0964-1726 doi: 10.1088/0964-1726/14/2/018

Tulita, C., Turkbeyler, E. and Raghunathan, S. (2005) Investigation of the influence of the turbulent transition on transonic periodic flow. In: Second International Symposium on Integrating CFD and Experiment in Aerodynamics, 5-6 Sep 2005, Royal Military College of Science, University of Cranfield.

Wu, S. M. and Clements-Croome, D. (2005) Burn in policies for products having dormant states. In: Cui, L. and Tsang, A. H. C. (eds.) Proceedings of the 4th International Conference on Quality & Reliability. Beijing Inst Technology Pr, Beijing, pp. 567-573. ISBN 781045742X

Wu, S. M. and Clements-Croome, D. (2005) Critical reliability issues for building services systems. In: Cui, L. and Tsang, A. H. C. (eds.) Proceedings of the 4th International Conference on Quality & Reliability. Beijing Inst Technology Pr, Beijing, pp. 559-565. ISBN 781045742X

Wu, S. M. and Clements-Croome, D. (2005) Optimal maintenance policies under different operational schedules. IEEE Transactions on Reliability, 54 (2). pp. 338-346. ISSN 0018-9529 doi: 10.1109/tr.2005.847255

Wu, S. M. and Clements-Croome, D. (2005) Preventive maintenance models with random maintenance quality. Reliability Engineering & System Safety, 90 (1). pp. 99-105. ISSN 0951-8320 doi: 10.1016/j.ress.2005.03.012

Wu, S. and Clements-Croome, D.J. (2005) A novel repair model for imperfect maintenance. IMA Journal of Management Mathematics, 17 (3). pp. 235-243. ISSN 1471-678X doi: 10.1093/imaman/dpi036

Yao, R. and Steemers, K. (2005) A method of formulating energy load profile for domestic buildings in the UK. International Journal of Energy and Building, 37 (6). pp. 663-671. ISSN 0378-7788 doi: 10.1016/j.enbuild.2004.09.007

Yao, R., Li, B. and Steemers, K. (2005) Energy policy and standard for built environment in China. Renewable Energy, 30 (13). pp. 1973-1988. ISSN 0960-1481 doi: 10.1016/j.renene.2005.01.013

Yao, R., Li, B. and Steemers, K. (2005) Field study on thermal comfort in hot humid-climate. In: Clima2005, 9-12 October 2005, Lausanne, Switzerland .

Yao, R., Li, B. and Stmmers, K. (2005) Energy and comfort performance of natural ventilation system in office buildings in China. In: AIVC Conference , 21-23 September 2005, Brussels, Belgium.

Yao, R., Steemers, K. and Baker, N. (2005) Strategic design and analysis method of natural ventilation for summer cooling. Building Services Engineering Research and Technology -an International Journal, 25 (4). ISSN 0143-6244

Yao, R., Steemers, K. and Li, B. (2005) Climatic suitability analysis for natural ventilation cooling in office building in China. In: 22nd conference on passive low energy architecture, Beirut, Lebanon, 13-16 November, 2005 .

Yao, R., Steemers, K. and Li, N. (2005) An assessment tool for natural ventilation in strategic building design. In: 22nd conference on passive low energy architecture, 13-16 November, 2005 , Beirut, Lebanon.

2004

Al Bizri, S. and Gray, C. (2004) The management of design. In: Clements-Croome, D.J. (ed.) Intelligent buildings: design, management and operation. Thomas Telford, London, pp. 245-272. ISBN 9780727732668

Atkins, A. G., Xu, X. and Jeronimidis, G. (2004) Cutting, by 'pressing and slicing,' of thin floppy slices of materials illustrated by experiments on cheddar cheese and salami. Journal of Materials Science, 39 (8). pp. 2761-2766. ISSN 0022-2461 doi: 10.1023/B:JMSC.0000021451.17182.86

Atkins, A.G. (2004) Fracture toughness and cutting. Engineering fracture mechanics, 12 (2). pp. 263-274. ISSN 0013-7944 doi: 10.1080/00207547408919554

Atkins, A.G. (2004) Rosenheim and Sterney revisited: the 'tear' chip in cutting interpreted in terms of modern ductile fracture mechanics. Proceedings of the Institute of Mechanical Engineers - Part C Journal of Mechanical Engineering Science, 218. 1181 - 1194.

Atkins, A.G. (2004) Toughness, the shearing of self-mated junctions and friction. Wear, 257 (1-2). pp. 154-156. ISSN 0043-1648 doi: 10.1016/j.wear.2003.10.022

Bonser, R. H. C., Saker, L. and Jeronimidis, G. (2004) Toughness anisotropy in feather keratin. Journal of Materials Science, 39 (8). pp. 2895-2896. ISSN 0022-2461 doi: 10.1023/B:JMSC.0000021474.75864.ff

Bonser, R.H.C. , Harwin, W.S. , Hayes, W. , Jeronimidis, G. , Mitchell, G.R. and Santulli, C., (2004) EAP-Based artificial muscles as an alternative to space mechanisms. University of Reading

Bonser, R.H.C., Jeronimidis, G. and Saker, L. (2004) Exploring the toughness of feather keratin. In: SEB annual meeting.

Bourbia, F. and Awbi, H. B. (2004) Building cluster and shading in urban canyon for hot dry climate - Part 1: Air and surface temperature measurements. Renewable Energy, 29 (2). pp. 249-262. ISSN 0960-1481 doi: 10.1016/s0960-1481(03)00170-8

Bourbia, F. and Awbi, H. B. (2004) Building cluster and shading in urban canyon for hot dry climate Part 2: Shading simulations. Renewable Energy, 29 (2). pp. 291-301. ISSN 0960-1481 doi: 10.1016/s0960-1481(03)00171-x

Bright, K., Cook, G. and Harris, J. (2004) Colour, contrast & perception: A design guidance for internal built environments. Research Group for Inclusive Environments . ISBN 9780704912083

Chanliaud, E., De Silva, J. , Strongitharm, B. , Jeronimidis, G. and Gidley, M.J. (2004) Mechanical effects of plant cell wall enzymes on xyloglucan/cellulose composites. The Plant Journal, 38 (1). pp. 27-37. ISSN 0960-7412 doi: 10.1111/j.1365-313X.2004.02018.x

Cho, Y. and Awbi, H.B. (2004) Multiple regression analysis of the variation in room velocity with change in heat source location for mixing ventilation. In: 9th Int. Conference on Air Distribution in Rooms (Roomvent 2004), Coimbra, Portugal.

Cho, Y. and Awbi, H.B. (2004) The effect of changing workstation position on the ventilation performance of a room with mixing ventilation, Paper 709. In: CIB 2004 World Building Congress: Building for the future, Toronto, Canada.

Cho, Y., Awbi, H.B. and Karimipanh, T. (2004) The characteristics of wall confluent jets for ventilated enclosures. In: 9th Int. Conference on Air Distribution in Rooms (Roomvent 2004), Coimbra, Portugal.

Clements-Croome, D.J. (2004) Building environment, architecture and people. In: Clements-Croome, D.J. (ed.) Intelligent buildings: design, management and operation. Thomas Telford, London, pp. 53-100. ISBN 9780727732668

Clements-Croome, D.J. (2004) The Concept of Intelligent Buildings. In: International Conference, University of Krakow.

Clements-Croome, D.J. (2004) Intelligent buildings: Design management and operation. Thomas Telford, pp408. ISBN 9780727732668

Clements-Croome, D.J. (2004) Sustainable architecture. In: Clements-Croome, D.J. (ed.) Intelligent Buildings: Design, Management and Operation. Thomas Telford, London. ISBN 9780727732668

Clements-Croome, D.J., John, G., Loy, H. and Wu, S. (2004) Building performance of intelligent buildings. In: CIB World Building Congress 2004: Building for the future.

Clements-Croome, D.J., John, G., Loy, H. and Wu, S. (2004) Environmental quality and the productive workplace. In: CIB World Building Congress 2004: Building for the future.

Cook, G. K. (2004) Lighting, colour and acoustics. In: Buildings for all to use - improving the accessibility of public buildings and environments. CIRIA. ISBN 9780860176107

Cook, G. K. (2004) Public service director: Designs for everyone. GovNet Communications, 3 (3). p. 83.

Cook, G.K. (2004) Colour contrast and lighting. In: Bright, K. (ed.) Disability: Making Buildings Accessible. Workplacelaw Network, Cambridge, 54 - 62. ISBN 1900648849

Coutand, C., Jeronimidis, G., Chanson, B. and Loup, C. (2004) Comparison of mechanical properties of tension and opposite wood in Populus. Wood Science and Technology, 38 (1). pp. 11-24. ISSN 0043-7719 doi: 10.1007/s00226-003-0194-4

Elmualim, A.A. and Awbi, H.B. (2004) Evaluating a control strategy for a hybrid air-conditioning and windcatchers ventilation system. In: CIB 2004 World Building Congress, Toronto, Canada.

Finch, E. (2004) Facilities Management (Chapter 11). In: Clements-Croome, D.J. (ed.) Intelligent Buildings: Design Management and Operation. Thomas Telford, pp. 289-302. ISBN 9780727732668

Fisher, N. (2004) Managing construction projects. In: Clements-Croome, D.J. (ed.) Intelligent Buildings: Design, Management and Operation. Thomas Telford, London, pp. 273-288. ISBN 9780727732668

Gindl, M. , Jeronimidis, G., Atkins, A.G. and Stanzl-Tschegg, S. (2004) Continuous hardness testing for the determination of mechanical and fracture-mechanical properties of laminated particleboards. In: 2nd International Symposium on Wood Machining, Vienna.

Gindl, W. and Jeronimidis, G. (2004) Wood pulp fiber reinforced melamine-formaldehyde composites. Journal of Materials Science, 39 (9). pp. 3245-3247. ISSN 0022-2461 doi: 10.1023/B:JMSC.0000025870.09117.f6

Gindl, W., Hansmann, C., Gierlinger, N., Schwanninger, M., Hinterstoisser, B. and Jeronimidis, G. (2004) Using a water-soluble melamine-formaldehyde resin to improve the hardness of Norway spruce wood. Journal of Applied Polymer Science, 93 (4). pp. 1900-1907. ISSN 0021-8995 doi: 10.1002/app.20653

Gindl, W., Schoberl, T. and Jeronimidis, G. (2004) The interphase in phenol-formaldehyde (PF) and polymeric methylene di-phenyl-di-isocyanate (pMDI) glue lines in wood (vol 24, pg 279, 2004). International Journal of Adhesion and Adhesives, 24 (6). p. 535. ISSN 0143-7496 doi: 10.1016/j.ijadhadh.2004.07.001

Jeronimidis, G. (2004) Biodynamics (Natural dynamic systems, material behaviour and adaptation in architecture and engineering). Architectural Design, 74 (3). pp. 90-95. ISSN 0003-8504

Jeronimidis, G. (2004) Wood machining: problems, approaches and strategies. In: 2nd International Symposium on Wood Machining, Vienna.

John, G.A., Loy, H.M., Clements-Croome, D.J., Fairey, V. and Neale, K. (2004) A systems thinking approach for performance based buildings. In: CIB World Building Congress 2004: Building for the future, Toronto, Canada.

Lee, H. and Awbi, H. B. (2004) Effect of internal partitioning on indoor air quality of rooms with mixing ventilation - basic study. Building and Environment, 39 (2). pp. 127-141. ISSN 0360-1323 doi: 10.1016/j.buildenv.2003.08.007

Lee, H. and Awbi, H. B. (2004) Effect of internal partitioning on room air quality with mixing ventilation-statistical analysis. Renewable Energy, 29 (10). pp. 1721-1732. ISSN 0960-1481 doi: 10.1016/j.renene.2003.12.023

Loy, H., John, G., Clements-Croome, D., Fairey, V. and Neale, K. (2004) Achieving quality through statistical prediction for building services systems. Building Services Engineering Research and Technology, 25 (2). pp. 99-110. ISSN 0143-6244 doi: 10.1191/0143624404bt082oa

Pardoen, T., Hachez, F., Marchioni, B., Blyth, P.H. and Atkins, A.G. (2004) Mode I fracture of sheet metal. Journal of the Mechanics and Physics of Solids, 52. pp. 423-452. ISSN 0022-5096 doi: 10.1016/S0022-5096(03)00087-5

Ransgri, W., Gril, J. and Jeronimidis, G. (2004) Finite elements simulation of the transverse compressive deformation of a tropical hardwood. In: 2nd International Conference of the European Society of Wood Mechanics, Stockholm.

Santulli, C. and Jeronimidis, G. (2004) Damage detection in fruits using Laser Doppler vibrometry. In: British Non-Destructive Testing Conference, Torquay.

Schmitt, U. , Ander, P. , Barnett, J.R. , Emons, A.M.C. and Jeronimidis, G. (2004) Wood fibre cell walls: Methods to study their formation, structure and properties. Uppsala University, pp308. ISBN 9789157668035

Shorten, D. and Chaplin, C.R. (2004) Wire rope lubrication. In: International Cranes and Specialised Transport.

Wu, S., John, G.A., Loy, H.M. and Clements-Croome, D.J. (2004) A novel repair model for imperfect maintenance. In: 5th Int. Mathematics and its Applications and Reliability Conference "Impact on Practice", University of Salford.

Xu, X., Jeronimidis, G., Atkins, A.G. and Trusty, P.A. (2004) Rate-dependent fracture toughness of polycrystalline ice. Journal of Material Sciences, 39 (1). pp. 225-233. ISSN 0022-2461 doi: 10.1023/B:JMSC.0000007748.36956.a9

Xu, X., Jeronimidis, G., Atkins, A.G. and Trusty, P.A. (2004) Stress relaxation behaviour of frozen sucrose solutions. Journal of Texture Studies, 35 (1). pp. 11-32. ISSN 0022-4901 doi: 10.1111/j.1745-4603.2004.tb00820.x

Yao, R. and Steemers, K. (2004) Strategic design method for natural ventilation in buildings. In: 9th International Conference on Air Distribution in Roomvent 2004, 5-8 September 2004, Coimbra, Portugal .

Yao, R., Baker, N. and Li, B. (2004) Energy simulation tool for architectural design. Journal of World Architecture. ISSN 1002-4832

Yao, R., Li, B. and Steemers, K. (2004) Policy and Standard for energy efficient building design in China. In: The 8th World Renewable Energy Congress, 28th August to 3rd September, 2004 , Denver, USA.

Yao, R., Steemers, K., Baker, N. and Li, B. (2004) A method of energy efficient building design and planning. Architectural Journal. ISSN 1016-3212

2003

Atkins, A.G. (2003) Modelling metal cutting using modern ductile fracture mechanics: Quantitative explanations for some longstanding problems. International Journal of Mechanical Sciences, 45 (2). pp. 373-396. ISSN 0020-7403 doi: 10.1016/S0020-7403(03)00040-7

Awbi, H.B. (2003) Ventilation of buildings. Taylor and Francis, London, pp328. ISBN 9780415270557

Bright, K. , Cook, G., Hill, S. and O'Neill, L. (2003) Inclusive lighting design in the home. In: Include 2003, Royal College of Art, London.

Bright, K., Cook, G., Yohannes, I., Dalke, H. and Camgöz, N. (2003) Colour and lighting design for inter-modal transport environments. In: Include 2003, Royal College of Art, London.

Bright, K.T. and Cook, G.K. (2003) Lighting and colouring the way to inclusive, accessible environments. In: Vision Loss in the 21st Century - Everybody's Business, Los Angeles, USA.

Chaplin, C.R. (2003) Rope tension in double drum traction winches. In: OIPEEC Technical Meeting: Experiences with Ropes, Lenzberg, Switzerland.

Cho, Y. and Awbi, H.B. (2003) The variation of ventilation performance in relation to change in workstation location in a ventilated room. In: Healthy Buildings 2003, Singapore.

Clements-Croome, D. J., ed. (2003) Electromagnetic environments and health in buildings. E & FN Spon, pp535. ISBN 9780415316569

Clements-Croome, D. J. (2003) Environmental quality and the productive workplace. In: Anumba, C. J. (ed.) Innovative Developments in Architecture, Engineering and Contruction. Millpress Science Publishers, Rotterdam, pp. 335-341. ISBN 9789059660083

Clements-Croome, D., Jones, K., John, G. and Loy, H. (2003) Through life business modelling for sustainable architecture. In: The Worldwide CIBSE/ASHRAE Conference, Building Sustainability, Value and Profit, Edinburgh International Conference Centre Scotland.

Cook, G.K., Bright, K.T., O'Neill, L. and Hill, S. (2003) Lighting in the homes of visually impaired people. In: 11th International Mobility Conference, Stellenbosch, South Africa.

Cook, G.K., Dalke, H., Bright, K.T., Yohannes, I. and Camgoz, N. (2003) Inclusive transport environments for people who are visually impaired. In: 11th International Mobility Conference - in touch with Africa, in step with the world, Stellenbosch, South Africa.

Dalke, H. , Camgöz, N., Bright, K., Cook, G., Littlefair, P. and Loe, D. (2003) Research with users: Colour design and lighting for public transport, prison and healthcare environments. In: Include 2003, Royal College of Art, London.

Elmualim, A. and Awbi, H. (2003) Post-occupancy monitoring of windcatchers for summer ventilation in the UK. In: Healthy Buildings 2003, National University of Singapore.

Elmualim, A. .A. and Awbi, H. B. (2003) Post occupancy evaluation of a building employing windcatchers for summer ventilation. Facilities, 21 (13/14). pp. 323-332. ISSN 0263-2772 doi: 10.1108/02632770310507980

Elmualim, A.A., Awbi, H.B., Fullford, D. and Wetterstad, L. (2003) Performance evaluation of wall mounted convector for pre-heating naturally ventilated spaces. International Journal of Ventilation, 2 (3). pp. 213-224. ISSN 1473-3315

Hou, J.P. and Jeronimidis, G., (2003) FEA results of Cobra II bogie in comparison with Cobra I bogie. UNSPECIFIED doi: EBG04

Hou, J.P. and Jeronimidis, G. (2003) Simulation of a composite leaf spring using finite element method. In: Computational Technologies for Virtual Product Development, Warwickshire, UK.

Hou, J.P. and Jeronimidis, G., (2003) FEA simulation of Euro-spring 200 and 700 under static loading conditions. UNSPECIFIED

Hou, J.P. and Jeronimidis, G., (2003) Testing and FEA modelling on 2nd fifth scale bogie. UNSPECIFIED doi: EBG05

Jeronimidis, G. (2003) Smart actuation from coupling between active polymer gels and fibrous structures - Can we learn from biological systems? In: Watanabe, K. and Ziegler, F. (eds.) IUTAM Symposium on Dynamics of Advanced Materials and Smart Structures. Solid Mechanics and Its Applications, 106. Springer, Dordrecht, pp. 167-176. ISBN 1402010613

John, G. A., Loy, H. M., Clements-Croome, D. J., Fairey, V. and Neale, K. (2003) A system's model for maintenance support and decision making in building services systems. In: Anumba, C. J. (ed.) Innovative Developments in Architecture, Engineering and Contruction. Millpress Science Publishers, Rotterdam, pp. 705-716. ISBN 9059660080

John, G., Loy, H., Clements-Croome, D., Fairey, V. and Neale, K. (2003) Ageing gracefully: How can a whole life support services framework enhance the life of the building services systems? In: Healthy Buildings Conference 2003, Singapore.

Li, B., Yao, R., Baker, N. and Steemers, K. (2003) Innovative use of strategic design tools in building design in China. Journal of Chongqing University. ISSN 1671-8224

Piyasena, P., Mohareb, E. and McKellar, R.C. (2003) Inactivation of microbes using ultrasound: a review. International Journal of Food Microbiology, 87 (3). pp. 207-216. ISSN 01681605 doi: 10.1016/S0168-1605(03)00075-8

Xu, X., Jeronimidis, G., Atkins, A. G. and Trusty, P. A. (2003) On the yield stress of frozen sucrose solutions. Journal of Materials Science, 38 (2). pp. 245-253. ISSN 0022-2461

Yao, R., Baker, N. and McEvoy, M. (2003) A simplified method for referring the energy and overheating performance of window design. Architectural Science Review, 46 (3). pp. 225-232. ISSN 0003-8628 doi: 10.1080/00038628.2003.9696988

Yao, R., Steemers, K. and Li, B. (2003) Energy efficient design for residential buildings in China. Journal of Chongqing University. ISSN 1000-582X

2002

Baker, N. and Yao, R. (2002) LT Europe - an Integrated Energy Design Tool for Building. In: PLEA 2002, July 2002, Toulouse, France.

Li, B. and Yao, R. (2002) Passive design for residential buildings and thermal comfort in south China. In: PLEA conference, July 2002 , Toulouse, France.

Turkbeyler, E. (2002) Unsteady flow simulations of a transonic nozzle and cascade for a time-dependent boundary flow. In: ASME Turbo Expo 2002, June 3-6 2002, Amsterdam, Netherlands, pp. 851-860.

Yao, R., Baker, N. and McEvoy, M. (2002) A simplified thermal resistance network model for building thermal simulation. In: Sim 2002 Building simulation, September 11-13 July 2002 , Canada.

2001

Cook, G., Bright, K. and Luck, R. (2001) Influence of colour on the inclusivity of an environment. In: Include 2001: an international conference on inclusive design and communications, 18-20 Apr 2001, Royal College of Art, London.

Elmualim, A. and Awbi, H. (2001) Evaluating the performance of a Windcatcher system using wind tunnel testing. In: 22nd Annual AIVC Conference, 11-14 September 2001, Bath, UK.

Foster, P. J., Burgoyne, A. and Vahdati, M. M. (2001) Improved process topology for membrane distillation. Separation and Purification Technology, 21 (3). pp. 205-217. ISSN 1383-5866 doi: 10.1016/S1383-5866(00)00201-X

Yao, R., Miller, A. and Ip, K. (2001) Innovative Use of Computer Tools and IT in Building Services Engineering. In: The First International Conference on Innovation in Architecture, Engineering and Construction, July 2001, Loughborough.

2000

Cook, G. K. (2000) A vector approach to the assessment of undergraduate engineering courses. International Journal of Engineering Education, 16 (1). pp. 3-11. ISSN 0949-149X

Vahdati, M. and Burgoyne, A. (2000) Direct contact membrane distillation. Separation Science and Technology, 35 (8). pp. 1257-1284. ISSN 0149-6395 doi: 10.1081/SS-100100224

Vahdati, M. and O'Nions, P. (2000) Design and development of a low NOx Coanda ejector burner. Journal of the Institute of Energy, 73 (494). pp. 12-17. ISSN 0144-2600

Yao, R., Feng, Y. and Miller, A. (2000) The Use of earth tube systems as a means of improving indoor thermal comfort in south China. In: the World Renewable Energy Congress –VI , July 2000, Brighton,UK.

1999

Cook, G. K. and Bright, K., (1999) Project Rainbow: a research project to provide colour and contrast design guidance for internal built environments. Occasional Papers . 57. Technical Report. Chartered Institute of Building, Ascot, UK. pp20. ISBN 1853800848

Cook, G. K., Wfiot, M. S., Webber, G. M. B. and Bright, K. T. (1999) Emergency lighting and wayfinding provision systems for visually impaired people: phase II of a study. Lighting Research & Technology, 31 (2). pp. 43-48. ISSN 1477-1535 doi: 10.1177/096032719903100202

Elmualim, A. A., Smith, S., Riffat, S. B. and Shao, L. (1999) Evaluation of dichroic material for enhancing light pipe/natural ventilation and daylighting in an integrated system. Applied Energy, 62 (4). pp. 253-266. ISSN 0306-2619 doi: 10.1016/S0306-2619(99)00014-8

Vahdati, M. (1999) Advances in module design for membrane distillation. In: ICOM'99, June 1999, Toronto, Canada. (Unpublished)

Vahdati, M. (1999) Permeate flux modeling of membrane distillation. Filtration and Separation, 36 (1). pp. 49-53. ISSN 0015-1882 doi: 10.1016/S0015-1882(99)80017-2

1998

Elmualim, A. (1998) Measurement and modelling of light pipe for energy efficient lighting. In: CIBSE National Lighting Conference, Lancaster University, UK, pp. 410-419. (Unpublished)

Shao, L., Elmualim, A. A. and Yohannes, I. (1998) Mirror lightpipes: daylighting performance in real buildings. Lighting Research and Technology, 30 (1). pp. 37-44. ISSN 1477-0938 doi: 10.1177/096032719803000106

Turkbeyler, E. (1998) A numerical study of shock motion in unsteady two-dimensional nozzle flow. In: 6th International Conference on Numerical Methods for Fluid Dynamics by ICFD, 31 March- 4 April 1998, University of Oxford. (Unpublished)

Turkbeyler, E. (1998) A solution-adaptive grid-refinement technique for the 2-D Euler equations. In: Proceedings of International Conference on Advanced Computational Methods in Engineering, 2-4 Sept , University of Ghent, Belgium. (Unpublished)

1997

Elmualim, A. (1997) Innovation-lightpipes. In: MRETT Conference, University of Nottingham. (Unpublished)

1995

Burgoyne, A., Vahdati, M. and Priestman, G. H. (1995) Investigation of flux in flat-plate modules for membrane distillation. Developments in Chemical Engineering and Mineral Processing, 3 (3-4). pp. 161-175. doi: 10.1002/apj.5500030305