Number of items at this level: 91.
An, Y., Holt, J. J., Mitchell, G. R. and Vaughan, A. S.
(2006)
Influence of molecular composition on the development of microstructure from sheared polyethylene melts: Molecular and lamellar templating.
Polymer, 47 (15).
pp. 5643-5656.
ISSN 0032-3861
doi: 10.1016/j.polymer.2006.01.097
Asghar, K. A., Elliott, J. M. and Squires, A. M.
(2012)
2D hexagonal mesoporous platinum films exhibiting biaxial, in-plane pore alignment.
Journal of Materials Chemistry, 22 (26).
pp. 13311-13317.
ISSN 0959-9428
doi: 10.1039/C2JM31731A
Auriemma, F., De Rosa, C., Esposito, S. and Mitchell, G. R.
(2007)
Polymorphic superelasticity in semicrystalline polymers.
Angewandte Chemie International Edition, 46 (23).
pp. 4325-4328.
ISSN 1433-7851
doi: DOI:10.1002/anie.200605021
Bartolo, P.J. and Mitchell, G.R.
(2003)
Stereo-thermal-litography: a new principle for rapid prototyping.
Rapid Prototyping Journal, 9.
pp. 150-156.
Bennett, R. A., Mulley, J. S., Etman, H. A., Sparkes, A., Eralp, T., Held, G., Cavill, S. A. and Dhesi, S. S.
(2012)
Chromium nanostructures formed by dewetting of heteroepitaxial films on W(100).
Physical Review B, 86 (4).
045454.
ISSN 1098-0121
doi: 10.1103/PhysRevB.86.045454
Castelletto, V., Cheng, G. and Hamley, I.
(2011)
Amyloid peptides incorporating a core sequence from the amyloid beta peptide and gamma amino acids: relating bioactivity to self-assembly.
Chemical Communications, 47.
pp. 12470-12472.
ISSN 1359-7345
doi: 10.1039/c1cc15493a
Castelletto, V., Cheng, G., Greenland, B. W., Hamley, I. W. and Harris, P. J. F.
(2011)
Tuning the self-assembly of the bioactive dipeptide L-carnosine by incorporation of a bulky aromatic substituent.
Langmuir, 27 (6).
pp. 2980-2988.
ISSN 0743-7463
doi: 10.1021/la104495g
Castelletto, V., Cheng, G., Stain, C., Connon, C. and Hamley, I.
(2012)
Self-assembly of a peptide amphiphile containing l-carnosine and its mixtures with a multilamellar vesicle forming lipid.
Langmuir, 28 (31).
pp. 11599-11608.
ISSN 0743-7463
doi: 10.1021/la302210b
Castelletto, V., Hamley, I. W., Stain, C. and Connon, C.
(2012)
Slow-release RGD-peptide hydrogel monoliths.
Langmuir, 28 (34).
pp. 12575-12580.
ISSN 0743-7463
doi: 10.1021/la302071e
Cerva, A., Capela, C., Mateus, A., Bartolo, P. J. and Mitchell, G.
(2007)
Composition and cure temperature: The influence on properties of final flexible PU cold cure foam parts.
In: Paolo, J. d. and Jorge, M.A. (eds.)
Virtual and Rapid Manufacturing.
Taylor and Francis, pp. 395-400.
ISBN 9780415416023
Channuan, W., Siripitayananon, J., Molloy, R. and Mitchell, G. R.
(2008)
Defining the physical structure and properties in novel monofilaments with potential for use as absorbable surgical sutures based on a lactide containing block terpolymer.
Polymer, 49 (20).
pp. 4433-4445.
ISSN 0032-3861
doi: DOI: 10.1016/j.polymer.2008.07.058
Channuan, W., Siripitayananon, J., Molloy, R., Sriyai, M., Davis, F. J. and Mitchell, G. R.
(2005)
The structure of crystallisable copolymers of L-lactide, epsilon-caprolactone and glycolide.
Polymer, 46 (17).
pp. 6411-6428.
ISSN 0032-3861
doi: 10.1016/j.polymer.2005.04.097
Chen, B., Jones, R. R., Mi, S., Foster, J., Alcock, S., Hamley, I. and Connon, C.
(2012)
The mechanical properties of amniotic membrane influence its effect as a
biomaterial for ocular surface repair.
Soft Matter, 8 (32).
pp. 8379-8387.
ISSN 1744-683X
doi: 10.1039/C2SM26175H
Chen, B., Mi, S., Wright, B. and Connon, C. J.
(2010)
Investigation of K14/K5 as a stem cell marker in the limbal region of the bovine cornea.
PLoS ONE, 5 (10).
e13192.
ISSN 1932-6203
doi: 10.1371/journal.pone.0013192
Cheng, G., Castelletto, V., Jones, R. R., Connon, C. J. and Hamley, I. W.
(2011)
Hydrogelation of self-assembling RGD-based peptides.
Soft Matter, 7 (4).
pp. 1326-1333.
ISSN 1744-683X
doi: 10.1039/C0SM00408A
Connon, C. J., Nakamura, T., Hopkinson, A., Quantock, A., Yagi, N., Doutch, J. and Meek, K. M.
(2007)
The biomechanics of amnion rupture: an X-ray diffraction study.
PLoS ONE, 2 (11).
e1147.
ISSN 1932-6203
doi: 10.1371/journal.pone.0001147
Cook, J., Goodall, G. W., Khutoryanskaya, O. and Khutoryanskiy, V. V.
(2012)
Microwave-assisted hydrogel synthesis: a new method for crosslinking polymers in aqueous solutions.
Macromolecular Rapid Communications, 33 (4).
pp. 332-336.
ISSN 1022-1336
doi: 10.1002/marc.201100742
Cullen, L. G., Tilston, E. L., Mitchell, G. R., Collins, C. D. and Shaw, L. J.
(2010)
Assessing the impact of nano- and micro-scale zerovalent iron particles on soil microbial activities: Particle reactivity interferes with assay conditions and interpretation of genuine microbial effects.
Chemosphere, 82 (11).
pp. 1675-1682.
ISSN 0045-6535
doi: 10.1016/j.chemosphere.2010.11.009
Davis, F. J. and Mitchell, G. R.
(2011)
Polymeric materials for rapid manufacturing.
In: Bártolo, P. J. (ed.)
Stereolithography: materials, processes and applications.
Springer, pp. 113-139.
ISBN 9780387929033
doi: 10.1007/978-0-387-92904-0_5
Dehsorkhi, A., Castelletto, V., Hamley, I. and Harris, P.
(2011)
Multiple hydrogen bonds induce formation of nanoparticles with internal microemulsion structure by an amphiphilic copolymer.
Soft Matter, 7.
pp. 10116-10121.
ISSN 1744-683X
doi: 10.1039/C1SM06267K
Dubnovitsky, A. P., Duck, Z., Kersley , J. E., Hard, J. E., MacIntyre, S. and Knight, S. D.
(2010)
Conserved hydrophobic clusters on the surface of the Caf1A usher C-terminal domain are important for F1 antigen assembly.
Journal of Molecular Biology, 403 (2).
pp. 243-259.
ISSN 0022-2836
doi: 10.1016/j.jmb.2010.08.034
Dumitriu, R. , Mitchell, G. and Vasile, C.
(2011)
Multi-responsive hydrogels based on N-isopropylacrylamide and sodium alginate.
Polymer International, 60 (2).
pp. 222-233.
ISSN 0959-8103
doi: 10.1002/pi.2929
Dumitriu, R. P. , Mitchell, G. and Vasile, C.
(2011)
Rheological and thermal behaviour of poly(N-isopropylacrylamide)/alginate smart polymeric networks.
Polymer International, 60 (9).
pp. 1398-1407.
ISSN 0959-8103
doi: 10.1002/pi.3093
Edwards, M. D., Mitchell, G. R., Mohan, S. D. and Olley, R. H.
(2010)
Development of orientation during electrospinning of fibres of poly(ε-caprolactone).
European Polymer Journal, 46 (6).
pp. 1175-1183.
ISSN 0014-3057
doi: 10.1016/j.eurpolymj.2010.03.017
Elliott, D. E., Davis, F. J., Mitchell, G. R. and Olley, R. H.
(2009)
Structure development in electrospun fibres of gelatin.
Journal of Physics: Conference Series, 183.
012021.
ISSN 1742-6588
doi: 10.1088/1742-6596/183/1/012021
Feng, Y., Foster, J., Mi, S., Chen, B. and Connon, C.
(2012)
Influence of substrate on corneal epithelial cell viability within ocular surface models.
Experimental Eye Research, 101.
pp. 97-103.
ISSN 0014-4835
doi: 10.1016/j.exer.2012.05.005
Fox, J., Wie, J. , Greenland, B., Burattini, S., Hayes, W., Colquhoun, H., Mackay, M. and Rowan, S.
(2012)
High-strength, healable, supramolecular polymer nanocomposites.
Journal of the American Chemical Society, 134 (11).
pp. 5362-5368.
ISSN 0002-7863
doi: 10.1021/ja300050x
Furmaniak, S., Kowalczyk, P. , Terzyk, A. P., Gauden, P. A. and Harris , P. J. F.
(2013)
Synergetic effect of carbon nanopore size and surface oxidation on CO2 capture from CO2/CH4 mixtures.
Journal of Colloid and Interface Science, 397.
pp. 144-153.
ISSN 0021-9797
doi: 10.1016/j.jcis.2013.01.044
Furmaniak, S., Terzyk, A. P. , Gauden, P. A. , Kowalczyk, P., Harris, P. J.F. and Koter, S.
(2013)
Applicability of molecular simulations for modelling the adsorption of the greenhouse gas CF4 on carbons.
Journal of Physics: Condensed Matter, 25 (1).
015004.
ISSN 1361-648X
doi: 10.1088/0953-8984/25/1/015004
Furmaniak, S., Terzyk, A. P., Gauden, P. A., Harris, P. J. F. and Kowalczyk, P.
(2010)
The influence of carbon surface oxygen groups on Dubinin–Astakhov equation parameters calculated from CO2 adsorption isotherm.
Journal of Physics: Condensed Matter, 22 (8).
085003.
ISSN 0953-8984
doi: 10.1088/0953-8984/22/8/085003
Furmaniak, S., Terzyk, A. P., Gauden, P. A., Harris, P. J. F., Wiśniewski, M. and Kowalczyk, P.
(2010)
Simple model of adsorption on external surface of carbon nanotubes: a new analytical approach basing on molecular simulation data.
Adsorption, 16 (4-5).
pp. 197-213.
ISSN 1572-8757
doi: 10.1007/s10450-010-9223-4
Furmaniak, S., Terzyk, A. P., Gauden, P. A., Harris, P. J. F. and Kowalczyk, P.
(2009)
Can carbon surface oxidation shift the pore size distribution curve calculated from Ar, N(2) and CO(2) adsorption isotherms? Simulation results for a realistic carbon model.
Journal of Physics: Condensed Matter, 21 (31).
315005.
ISSN 1361-648X
doi: 10.1088/0953-8984/21/31/315005
Furmaniak, S., Terzyk, A. P., Gauden, P. A., Kowalczyk, P. and Harris, P. J. F.
(2011)
The influence of the carbon surface chemical composition on Dubinin-Astakhov equation parameters calculated from SF(6) adsorption data-grand canonical Monte Carlo simulation.
Journal of Physics: Condensed Matter, 23 (39).
395005.
ISSN 1361-648X
doi: 10.1088/0953-8984/23/39/395005
Gauden, P. A., Terzyk, A. P., Furmaniak, S., Harris, P. J. F. and Kowalczyk, P.
(2010)
BET surface area of carbonaceous adsorbents: verification using geometric considerations and GCMC simulations on virtual porous carbon models.
Applied Surface Science, 256 (17).
pp. 5204-5209.
ISSN 0169-4332
doi: 10.1016/j.apsusc.2009.12.097
Gkourmpis, T. and Mitchell, G.
(2011)
Three dimensional picture of the local structure of 1,4-Polybutadiene
from a complete atomistic model and neutron scattering data.
Macromolecules, 44 (8).
pp. 3140-3148.
ISSN 0024-9297
doi: 10.1021/ma102840p
Green, C.D., Vaughan, A.S., Mitchell, G. R. and Liu, T.
(2008)
Structure property relationships in polyethylene/montmorillonite nanodielectrics.
IEEE Transactions on Dielectrics and Electrical Insulation, 15 (1).
pp. 134-143.
ISSN 1070-9878
doi: 10.1109/T-DEI.2008.4446744
Harris, P.
(2013)
Fullerene-like models for microporous carbon: a review.
Journal of Materials Science, 48 (2).
pp. 565-577.
ISSN 1573-4803
doi: 10.1007/s10853-012-6788-1
Harris, P. J. F.
(2009)
Carbon nanotube science: synthesis, properties and applications.
Cambridge University Press, Cambridge, pp314.
ISBN 9780521828953
Harris, P. J. F.
(2012)
Hollow structures with bilayer graphene walls.
Carbon, 50 (9).
pp. 3195-3199.
ISSN 0008-6223
doi: 10.1016/j.carbon.2011.10.050
Harris, P. J. F.
(2011)
Structural transformation of graphite by arc-discharge.
Philosophical Magazine, 91 (18).
pp. 2355-2363.
ISSN 1478-6443
doi: 10.1080/14786435.2011.562250
Harris, P. J. F.
(2009)
Ultrathin graphitic structures and carbon nanotubes in a purified synthetic graphite.
Journal of Physics: Condensed Matter, 21 (35).
355009.
ISSN 1361-648X
doi: 10.1088/0953-8984/21/35/355009
Harris, P. J. F., Liu, Z. and Suenaga, K.
(2008)
Imaging the atomic structure of activated carbon.
Journal of Physics: Condensed Matter, 20 (36).
362201.
ISSN 1361-648X
doi: 10.1088/0953-8984/20/36/362201
Harris, P. J. F., Liu, Z. and Suenaga, K.
(2010)
Imaging the structure of activated carbon using aberration corrected TEM.
Journal of Physics: Conference Series, 241 (1).
012050.
ISSN 1742-6588
doi: 10.1088/1742-6596/241/1/012050
Hermida-Merino, D., Belal, M., Greenland, B. W., Woodward, P., Slark, A. T., Davis, F. J., Mitchell, G. R., Hamley, I. W. and Hayes, W.
(2012)
Electrospun supramolecular polymer fibres.
European Polymer Journal, 48 (7).
pp. 1249-1255.
ISSN 0014-3057
doi: 10.1016/j.eurpolymj.2012.04.015
Hibble, S. J., Chippindale, A. M., Bilbé, E. J., Marelli, E., Harris, P. J.F. and Hannon, A. C.
(2010)
Structures of Pd(CN)2and Pt(CN)2: intrinsically nanocrystalline materials?
Inorganic Chemistry, 50 (1).
pp. 104-113.
ISSN 0020-1669
doi: 10.1021/ic101358q
Hosier, I.L., Vaughan, A.S., Mitchell, G.R., Siripitayananon, J. and Davis, F.J.
(2004)
Polymer characterization.
In: Davis, F. J. (ed.)
Polymer Chemistry: A Practical Approach.
Oxford University Press, pp. 1-42.
ISBN 9780198503095
Irmukhametova, G., Fraser, B., Keddie, J., Mun, G. and Khutoryanskiy, V. V.
(2012)
Hydrogen-bonding-driven self-assembly of PEGylated organosilica nanoparticles with poly(acrylic acid) in aqueous solutions and in layer-by-layer deposition at solid surfaces.
Langmuir, 28 (1).
pp. 299-306.
ISSN 0743-7463
doi: 10.1021/la2038735
Jones, R. R., Hamley, I. and Connon, C.
(2012)
Ex vivo expansion of limbal stem cells is affected by substrate properties.
Stem Cell Research, 8 (3).
pp. 403-409.
ISSN 1876-7753
doi: 10.1016/j.scr.2012.01.001
Kariduraganavar, M. Y., Davis, F. J., Mitchell, G. R. and Olley, R. H.
(2010)
Using an additive to control the electrospinning of fibres of poly(epsilon-caprolactone).
Polymer International, 59 (6).
pp. 827-835.
ISSN 0959-8103
doi: 10.1002/pi.2795
Koroleva, O. A., Gibson, T. M., Cramer, R. and Stain, C.
(2010)
Glucosinolate-accumulating S-cells in Arabidopsis leaves and flower stalks undergo programmed cell death at early stages of differentiation.
The Plant Journal, 64 (3).
pp. 456-469.
ISSN 0960-7412
doi: 10.1111/j.1365-313X.2010.04339.x
Kowalczyk, P., Gauden, P. A., Terzyk, A. P., Furmaniak, S. and Harris, P. J. F.
(2012)
Displacement of methane by coadsorbed carbon dioxide is facilitated in narrow carbon nanopores.
Journal of Physical Chemistry C, 116 (25).
pp. 13640-13649.
ISSN 1932-7447
doi: 10.1021/jp302776z
Liu, Z., Suenaga, K., Harris, P. J. F. and Iijima, S.
(2009)
Open and closed edges of graphene layers.
Physical Review Letters, 102 (1).
015501.
ISSN 1079-7114
doi: 10.1103/PhysRevLett.102.015501
Mateus, A., Bartolo, P. J., Mitchell, G., Silva, M., Pouzada, A. S. and Pontes, A. J.
(2007)
The effect of thermal conductivity of RIM moulds in kinetics cure.
In: Paulo, J. d. and Jorge, M.A. (eds.)
Virtual and Rapid Manufacturing.
Taylor and Francis, pp. 389-394.
ISBN 9780415416023
Mi, S., Chen, B., Wright, B. and Connon, C. J.
(2010)
Plastic compression of a collagen gel forms a much improved scaffold for ocular surface tissue engineering over conventional collagen gels.
Journal of Biomedical Materials Research Part A, 95A (2).
pp. 447-453.
ISSN 1549-3296
doi: 10.1002/jbm.a.32861
Mi, S., David, A. L., Chowdhury, B., Jones, R. R., Hamley, I., Squires, A. and Connon, C. J.
(2012)
Tissue engineering a fetal membrane.
Tissue Engineering Part A, 18 (3-4).
pp. 373-381.
ISSN 2152-4955
doi: 10.1089/ten.tea.2011.0194
Mi, S., Khutoryanskiy, V. V., Jones, R. R., Zhu, X., Hamley, I. W. and Connon, C. J.
(2011)
Photochemical cross-linking of plastically compressed collagen gel produces an optimal scaffold for corneal tissue engineering.
Journal of Biomedical Materials Research Part A, 99A (1).
pp. 1-8.
ISSN 1549-3296
doi: 10.1002/jbm.a.33152
Mitchell, G.
(2013)
Characterization of safe nanostructured polymeric materials.
In: Silvestre, C. and Cimmino, S. (eds.)
Ecosustainable polymer nanomaterials for food packaging.
CRC Press.
ISBN 9789004207370
Mitchell, G. R., Ahn, K.-h. and Davis, F. J.
(2011)
The potential of electrospinning in rapid manufacturing processes.
Virtual & Physical Prototyping, 6 (2).
pp. 63-77.
ISSN 1745-2767
doi: 10.1080/17452759.2011.590387
Mitchell, G. R., Bowron, D., Mateus, A., Bartolo, P., Gkourmpis, T., Phomphrai, K., Lopez, D. and Davis, F.
(2013)
SANS/WANS time-resolving neutron scattering studies of polymer phase transitions using NIMROD.
In: MRS Fall Meeting 2012, 25-30 Nov 2012, Boston, MA.
(MRS Online Proceedings Library, 1528, mrsf12-1528-vv06-04 )
Mitchell, G. R., Belal, M., Davis, F. J., Elliott, D. E., Kariduraganavar, M., Mohan, S. D., Olley, R. H. and Sen, S.
(2008)
Defining Structure in Electrospun Polymer Fibres.
In: Tunkasiri, T. (ed.)
Smart Materials.
Advanced Materials Research, 55-57.
Trans Tech Publications Ltd, Stafa-Zurich, pp. 33-36.
ISBN 9780878493562
doi: 10.4028/www.scientific.net/AMR.55-57.33
Mitchell, G.R., Saengsuwan, S. and Bualek-Limcharoen, S.
(2005)
Evaluation of preferred orientation in multi-component polymer systems using x-ray scattering procedures.
Progress in Colloid & Polymer Science, 130.
pp. 149-159.
Mohan, S. D., Davis, F. J., Olley, R. H. and Mitchell, G. R.
(2010)
Modelling small angle neutron scattering data from electrospun fibres.
Journal of Physics: Conference Series, 247 (1).
012042.
ISSN 1742-6596
doi: 10.1088/1742-6596/247/1/012042
Mohan, S. D., Mitchell, G. R. and Davis, F. J.
(2011)
Chain extension in electrospun polystyrene fibres: a SANS study.
Soft Matter, 7.
pp. 4397-4404.
ISSN 1744-683X
doi: 10.1039/c0sm01442g
Mulheran, P. .A., Pellenc, D., Bennett, R. A., Green, R. J. and Sperrin, M.
(2008)
Mechanisms and dynamics of protein clustering on a solid surface.
Physical Review Letters, 100 (6).
068102.
ISSN 0031-9007
doi: 10.1103/PhysRevLett.100.068102
Neuman, B. W., Kiss, G., Al-Mulla, H. M. N., Dokland, T., Buchmeier, M. J., Weikl, T. and Schley, D.
(2013)
Direct observation of membrane insertion by enveloped virus matrix proteins by phosphate displacement.
PLoS ONE, 8 (2).
e57916.
ISSN 1932-6203
Niemczyk, A. I., Williams, A. C., Rawlinson-Malone, C. F., Hayes, W., Greenland, B., Chappell, D. and Khutoryanskaya, O.
(2012)
Novel polyvinylpyrrolidones to improve delivery of poorly-water soluble drugs; from design to synthesis and evaluation.
Molecular Pharmaceutics, 9 (8).
pp. 2237-2247.
ISSN 1543-8392
doi: 10.1021/mp300079x
Nogales, A. and Mitchell, G. R.
(2005)
Development of highly oriented polymer crystals from row assemblies.
Polymer, 46 (15).
pp. 5615-5620.
Nogales, A., Mitchell, G.R. and Vaughan, A.S.
(2003)
Anisotropic crystallization in polypropylene induced by deformation of a nucleating agent network.
Macromolecules, 36.
pp. 4898-4906.
Nogales, A., Olley, R.H. and Mitchell, G.R.
(2003)
Directed crystallisation of synthetic polymers by low-molar-mass self-assembled templates.
Macromolecular Rapid Communications, 24.
pp. 496-502.
Pellenc, D., Bennett, R. A., Green, R. G., Sperrin, M. and Mulheran, P. A.
(2008)
New insights on growth mechanisms of protein clusters at surfaces: an AFM and simulation study.
Langmuir, 24 (17).
pp. 9648-9655.
ISSN 0743-7463
doi: 10.1021/la801246k
Rizi, K., Green, R. J., Khutoryanskaya, O., Donaldson, M. and Williams, A. C.
(2011)
Mechanisms of burst release from pH-responsive polymeric microparticles.
Journal of Pharmacy and Pharmacology, 63 (9).
pp. 1141-1155.
ISSN 0022-3573
doi: 10.1111/j.2042-7158.2011.01322.x
Rodriguez-Llansola, F., Escuder, B., Hamley, I. W., Hayes, W. and Miravet, J. F.
(2012)
Structural and morphological studies of the dipeptide based L-Pro-L-Val organocatalytic gels and their rheological behaviour.
Soft Matter, 8.
pp. 8865-8872.
ISSN 1744-683X
doi: 10.1039/c2sm25647a
Rodriguez-Llansola, F., Hermida-Merino, D., Nieto-Ortega, B., Ramirez, F. J., Lopez Navarrete, J. T., Casado, J., Hamley, I. W., Escuder, B., Hayes, W. and Miravet, J. F.
(2012)
Self-assembly studies of a chiral bisurea-based superhydrogelator.
Chemistry - A European Journal, 18 (46).
pp. 14725-14731.
ISSN 1521-3765
doi: 10.1002/chem.201200707
Saengsuwan, S., Bualek-Limcharoen, S., Mitchell, G.R. and Olley, R.H.
(2004)
Thermotropic liquid crystalline polymer (Rodrun LC5000)/polypropylene in situ composite films: reology, morphology, molecular orientation and tensile properties.
Polymer, 44.
pp. 3407-3415.
Saengsuwan, S., Mitchell, G.R. and Bualek-Limcharoen, S.
(2003)
Determination of orientation parameters in drawn films of thermotropic liquid crystalline polymer/polypropylene blends using WAXS.
Polymer, 44.
5951-5969..
Santulli, C., Patel, S. I., Jeronimidis, G., Davis, F. J. and Mitchell, G. R.
(2005)
Development of smart variable stiffness actuators using polymer hydrogels.
Smart Materials & Structures, 14 (2).
pp. 434-440.
ISSN 0964-1726
doi: 10.1088/0964-1726/14/2/018
Siripitayananon, J., Wangsoub, S., Olley, R. H. and Mitchell, G. R.
(2004)
The use of a low-molar-mass self-assembled template to direct the crystallisation of poly(epsilon-caprolactone).
Macromolecular Rapid Communications, 25 (15).
pp. 1365-1370.
Sogias, I., Williams, A. and Khutoryanskiy, V.
(2012)
Chitosan-based mucoadhesive tablets for oral delivery of ibuprofen.
International Journal of Pharmaceutics, 436 (1-2).
pp. 602-610.
ISSN 0378-5173
doi: 10.1016/j.ijpharm.2012.07.007
Terzyk, A. P., Furmaniak, S., Gauden, P. A., Harris, P. J. F. and Wloch, J.
(2008)
Testing isotherm models and recovering empirical relationships for adsorption in microporous carbons using virtual carbon models and grand canonical Monte Carlo simulations.
Journal of Physics: Condensed Matter, 20 (38).
385212 .
ISSN 1361-648X
doi: 10.1088/0953-8984/20/38/385212
Terzyk, A. P., Furmaniak, S., Gauden, P. A., Harris, P. J. F., Wloch, J. and Kowalczyk, P.
(2007)
Hyper-parallel tempering Monte Carlo simulations of Ar adsorption in new models of microporous non-graphitizing activated carbon: effect of microporosity.
Journal of Physics: Condensed Matter, 19 (40).
406208.
ISSN 1361-648X
doi: 10.1088/0953-8984/19/40/406208
Terzyk, A. P., Gauden, P. A., Furmaniak, S., Wesolowski, R. P. and Harris, P. J. F.
(2010)
Molecular dynamics simulation insight into the mechanism of phenol adsorption at low coverages from aqueous solutions on microporous carbons.
Physical Chemistry Chemical Physics, 12 (4).
pp. 812-817.
ISSN 1463-9084
doi: 10.1039/B919794J
Terzyk, A. P., Gauden, P. A., Furmaniak, S., Wesolowski, R. P., Harris, P. J. F. and Kowalczyk, P.
(2009)
Adsorption from aqueous solutions on opened carbon nanotubes: organic compounds speed up delivery of water from inside.
Physical Chemistry Chemical Physics, 11 (41).
pp. 9341-9345.
ISSN 1463-9084
doi: 10.1039/B916067A
Tiltson, E.M., Collins, C., Mitchell, G., Princivalle, J. and Shaw, L.
(2012)
Nanoscale zerovalent iron alters soil bacterial community structure and inhibits chloroaromatic biodegradation potential in Aroclor 1242-contaminated soil.
Environmental Pollution.
(In Press)
Vaiyapuri, R., Greenland, B. W., Rowan, S. J., Colquhoun, H. M., Elliott, J. M. and Hayes, W.
(2012)
A thermoresponsive supramolecular polymer network comprising pyrene-functionalized gold nano-particles and a chain-folding polydiimide.
Macromolecules, 45 (13).
pp. 5567-5574.
ISSN 0024-9297
doi: 10.1021/ma300796w
Vaiyapuri, S., Jones, C. I., Sasikumar, P., Moraes, L. A., Munger, S. J., Wright, J. R., Ali, M. S., Sage, T., Kaiser, W. J., Tucker, K. L., Stain, C. J., Bye, A. P., Jones, S., Oviedo-Orta, E., Simon, A. M., Mahaut-Smith, M. P. and Gibbins, J. M.
(2012)
Gap junctions and connexin hemichannels underpin hemostasis and thrombosis.
Circulation, 125 (20).
pp. 2479-2491.
ISSN 0009-7322
doi: 10.1161/CIRCULATIONAHA.112.101246
Waheed, A., Forsyth, D., Watts, A., Saad, A. F., Mitchell, G. R., Farmer, M. and Harris, P. J. F.
(2009)
The track nanotechnology.
Radiation Measurements, 44 (9-10).
pp. 1109-1113.
ISSN 1350-4487
doi: 10.1016/j.radmeas.2009.10.055
Wangsoub, S., Davis, F. J., Mitchell, G. R. and Olley, R. H.
(2008)
Enhanced Templating in the Crystallisation of Poly(E-caprolactone) Using 1,3:2,4-di(4-Chlorobenzylidene) Sorbitol.
Macromolecular Rapid Communications, 29 (23).
pp. 1861-1865.
ISSN 1022-1336
doi: 10.1002/marc.200800497
Wangsoub, S., Olley, R. H. and Mitchell, G. R.
(2005)
Directed crystallisation of poly(epsilon-caprolactone) using a low-molar-mass self-assembled template.
Macromolecular Chemistry And Physics, 206 (18).
pp. 1826-1839.
Wright, B., Cave, R. A., Cook, J. P., Khutoryanskiy, V. V., Mi, S., Chen, B., Leyland, M. and Connon, C. J.
(2012)
Enhanced viability of corneal epithelial cells for efficient transport/storage using a structurally-modified calcium alginate hydrogel.
Regenerative Medicine, 7 (3).
pp. 295-307.
ISSN 1746-076X
doi: 10.2217/rme.12.7
Zhang, X. T., Song, W. H., Harris, P. J. F. and Mitchell, G. R.
(2007)
Electrodeposition of chiral polymer-carbon nanotube composite films.
ChemPhysChem, 8 (12).
pp. 1766-1769.
ISSN 1439-4235
doi: DOI: 10.1002/cphc.200700213
Zhang, X., Song, W. H., Harris, P. J. F., Mitchell, G. R., Bui, T. T. T. and Drake, A. F.
(2007)
Chiral polymer-carbon-nanotube composite nanofibers.
Advanced Materials, 19 (8).
pp. 1079-1083.
ISSN 0935-9648
doi: 10.1002/adma.200601886
This list was generated on Sat May 18 14:26:21 2013 BST.