Items where Author is "Potter, Dr Ben"
Group by: Item Type | No Grouping Number of items: 39. Article
Daneshzand, Farzaneh, Coker, Phil J., Potter, Ben and Smith, Stefan T.
Shariati, O.
Shariati, Omid
Rodriguez, Ana, Smith, Stefán Thor Shariati, Omid, Aghamohammadi, Mohammad Reza and Potter, Ben (2021) On-line determination of salient-pole hydro generator parameters by neural network estimator using operating data (PEANN). IEEE Access, 9. pp. 134638-134648. ISSN 2169-3536 doi: https://doi.org/10.1109/ACCESS.2021.3115783 Ritzmann, Deborah, Rens, Johan, Wright, Paul S., Holderbaum, William and Potter, Ben (2017) A novel approach to noninvasive measurement of overhead line impedance parameters. IEEE Transactions on Instrumentation and Measurement, 66 (6). pp. 1155-1163. ISSN 0018-9456 doi: https://doi.org/10.1109/TIM.2017.2665958 Daniels, Laura, Coker, Phil and Potter, Ben (2016) Embodied carbon dioxide of network assets in a decarbonised electricity grid. Applied Energy, 180. 142 - 154. ISSN 0306-2619 doi: https://doi.org/10.1016/j.apenergy.2016.07.044 Ritzmann, Deborah, Wright, Paul S., Holderbaum, William and Potter, Ben (2016) A method for accurate transmission line impedance parameter estimation. IEEE Transactions on Instrumentation and Measurement, 65 (10). pp. 2204-2213. ISSN 0018-9456 doi: https://doi.org/10.1109/TIM.2016.2556920 Zangs, Maximilian J., Adams, Peter B. E., Yunusov, Timur, Holderbaum, William and Potter, Ben A. (2016) Distributed energy storage control for dynamic load impact mitigation. Energies, 9 (8). 647. ISSN 1996-1073 doi: https://doi.org/10.3390/en9080647 Yunusov, Timur, Frame, Damien, Holderbaum, William and Potter, Ben (2016) The impact of location and type on the performance of Low-Voltage network connected Battery Energy Storage Systems. Applied Energy, 165. pp. 202-213. ISSN 03062619 doi: https://doi.org/10.1016/j.apenergy.2015.12.045 Daniels, Laura, Coker, Phil, Gunn, Alice and Potter, Ben (2016) Using proxies to calculate the carbon impact of investment into electricity network assets. Applied Energy, 162. pp. 551-560. ISSN 0306-2619 doi: https://doi.org/10.1016/j.apenergy.2015.10.111 Moorey, Charles, Holderbaum, William and Potter, Ben (2015) Investigation of high-efficiency Wireless Power Transfer criteria of resonantly-coupled loops and dipoles through analysis of the figure of merit. Energies, 8 (10). pp. 11342-11362. ISSN 1996-1073 doi: https://doi.org/10.3390/en81011342 Rowe, Matthew, Yunusov, Timur, Haben, Stephen, Singleton, Colin, Holderbaum, William and Potter, Ben (2014) A peak reduction scheduling algorithm for storage devices on the low voltage network. IEEE Transactions on Smart Grid, 5 (4). pp. 2115-2124. ISSN 1949-3053 doi: https://doi.org/10.1109/TSG.2014.2323115 Rowe, Matthew, Yunusov, Timur, Haben, Stephen, Holderbaum, William and Potter, Ben (2014) The real-time optimisation of DNO owned storage devices on the LV network for peak reduction. Energies, 7 (6). pp. 3537-3560. ISSN 1996-1073 doi: https://doi.org/10.3390/en7063537 Markakis, Antonios, Holderbaum, William and Potter, Ben (2014) Bond graph models of DC-DC converters operating in both CCM and DCM. International Journal of Power Electronics, 6 (1). pp. 18-41. ISSN 1756-6398 doi: https://doi.org/10.1504/IJPELEC.2014.060706 Cave-Ayland, Kim, Becerra, Victor, Potter, Ben and Shirsavar, Ali (2014) Systematic selection of analogue redesign method for forward-type digital power converters. International Journal of Electronics, 101 (5). pp. 667-680. ISSN 0020-7217 doi: https://doi.org/10.1080/00207217.2013.794486 Hallworth, Michael, Potter, Ben and Shirsavar, Ali (2013) Analytical calculation of resonant inductance for zero voltage switching in phase-shifted full-bridge converters. Power Electronics, IET, 6 (3). pp. 523-534. ISSN 1755-4543 doi: https://doi.org/10.1049/iet-pel.2012.0461 Potter, Benjamin Alexander and Shirsavar, Seyed Ali (2009) Contactless power transfer system for rotating applications. WindTech International. pp. 32-35. Potter, Benjamin Alexander, Shirsavar, Seyed Ali and McCulloch, M.D. (2007) Study of the variation of the input impedance of induction machines with frequency. IET Electric Power Applications, 1 (1). pp. 36-42. ISSN 1751-8660 doi: https://doi.org/10.1049/iet-epa:20050524 Shirsavar, S. A., Potter, Benjamin A. and Ridge, I. M. L. (2006) Three-phase machines and drives - equipment for a laboratory-based course. IEEE Transactions on Education, 49 (3). pp. 383-388. ISSN 0018-9359 doi: https://doi.org/10.1109/TE.2006.879266 Conference or Workshop Item
Shariati, O., Coker, P., Smith, S. T. Yunusov, Timur, Zangs, Maximilian J., Holderbaum, William, Fila, Maciej and Potter, Ben (2018) Online control algorithm for sub-half-hourly operation of LV-connected energy storage device owned by DNO. In: CIRED 2017, 12-15 June 2017, Glasgow, UK, pp. 1342-1346. Yunusov, Timur, Haben, Stephen, Lee, Tamsin, Ziel, Florian, Holderbaum, William and Potter, Ben (2017) Evaluating the effectiveness of storage control in reducing peak demand on low voltage feeders. In: CIRED 2017, 12-15 Jun 2017, Glasgow, UK, pp. 1745-1749. Zangs, Maximilian J, Yunusov, Timur, Holderbaum, William and Potter, Ben (2016) On-line adjustment of battery schedules for supporting LV distribution network operation. In: Energy and Sustainability Conference (IESC), 2016 International, 30 Jun -1 Jul 2016, Koln, Germany. Rodriguez, Ana, Smith, Stefan Thor, Kiff, Alan and Potter, Ben (2016) Small power load disaggregation in office buildings based on electrical signature classification. In: IEEE International Energy Conference, EnergyCon, 4-8 April, Leuven, Belgium, pp. 1-6. Daniels, Laura, Potter, Ben and Coker, Phil (2014) Exploring methods to evaluate the carbon impact of network investment deferral. In: Innovative Smart Grid Technologies Conference Europe (ISGT-Europe), 2014 IEEE PES, 12-15th October 2014, Istanbul, pp. 1-6. Daniels, Laura, Walton, Paul, Potter, Ben and Coker, Phil (2014) Using standby generators in support of an electricity network: logistics and experience. In: CIBSE Technical Symposium 2014, 3rd - 4th April 2014, Dublin Technical Institute, Dublin, Ireland. Rowe, Matthew, Holderbaum, William and Potter, Ben (2013) Control methodologies: Peak reduction algorithms for DNO owned storage devices on the Low Voltage network. In: Innovative Smart Grid Technologies Europe (ISGT EUROPE), 2013 4th IEEE/PES, 6-9 Oct, Denmark, pp. 1-5. doi: https://doi.org/10.1109/ISGTEurope.2013.6695291 Daniels, Laura, Potter, Ben and Coker, Phil (2013) Financial implications for companies running standby generators in support of a smart grid. In: CISBAT 2013: CleanTech for Smart Cities & Buildings, 4th-6th September 2013, Lausanne, Switzerland, pp. 727-732. Haben, Stephen, Rowe, Matthew, Vukadinovic Greetham, Danica, Grindrod, Peter, Holderbaum, William, Potter, Ben and Singleton, Colin (2013) Mathematical solutions for electricity networks in a low carbon future. In: Electricity Distribution (CIRED 2013), 22nd International Conference and Exhibition on, 10-13 June 2013, Stockholm, 0857-0857. doi: https://doi.org/10.1049/cp.2013.0972 Cave-Ayland, Kim, Becerra, Victor, Potter, Ben and Shirsavar, Ali (2012) Choosing the most suitable analogue redesign method for forward-type digital power converters. In: IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), December 16-19, 2012, Bengaluru, India, pp. 1-6. doi: https://doi.org/10.1109/PEDES.2012.6484259 Yunusov, Timur, Holderbaum, William and Potter, Ben (2011) Cost function for sub-agent elements in multi-agent energy management system. In: Innovative Smart Grid Technologies (ISGT Europe) 2011, 5-7 Dec 2011, Manchester, UK, pp. 1-8. doi: https://doi.org/10.1109/ISGTEurope.2011.6162783 Yunusov, Timur, Holderbaum, William and Potter, Ben (2011) Sub-agent elements for control methods in multi-agent energy management system. In: 2011 IEEE 33rd International Telecommunications Energy Conference (INTELEC), 9-13th October 2011, Amsterdam, Netherlands, pp. 1-7. Markakis, Antonios, Holderbaum, William and Potter, Ben (2011) A comparison between bond graphs switching modelling techniques implemented on a boost dc-dc converter. In: 2011 IEEE 33rd International Telecommunications Energy Conference (INTELEC), 9-13th October 2011, Amsterdam, Netherlands, pp. 1-7. Potter, B. A. and Shirsavar, S. A. (2006) Design, implementation and characterisation of a contactless power transfer system for rotating applications. In: IECON 2006 32nd Annual Conference on IEEE Industrial Electronics, pp. 2168-2173. Potter, B., Shirsavar, S. and Ridge, I. (2004) Purpose built teaching equipment for a laboratory based course in three phase machines and drives. In: Proceedings of the IEEE International Conference on Mechatronics 2004 ICM 04, pp. 503-508. Potter, B. A., Shirsavar, S. A. and McCulloch, M. D. (2003) Optimal inverter design for an induction machine using resonant frequency matching. In: Electric Machines and Drives Conference 2003 IEMDC03 IEEE International. BookMitchell, Richard, Harwin, William, Cadenas Medina, Oswaldo, Guy, Chris, Gong, Alex, Potter, Ben and Warwick, Kevin, eds. (2012) Cybernetics, Circuits and Computing. Pearson, Harlow, pp499. ISBN 9781780160672 PatentPHILLIPS LYTLE LLP (2010) Wind turbine blade pitch control system. US20100061852. doi: US20100061852 |