Items where Division is "Construction Management and Engineering"
Number of items at this level: 405. 2023
Al-Dmour, Youmna
Alencastro, Joao, Fuertes, Alba
Alfalah, Bashar, Shahrestani, Mehdi
Bruce-Konuah, Adorkor, Jones, Rory V. and Fuertes, Alba Connaughton, John (2023) Education for collaboration in construction: challenges for universities and institutions. In: Meikle, Jim and Best, Rick (eds.) Describing Construction: Industries, projects and firms. Routledge, Abingdon, Oxon, pp. 67-87. ISBN 9780367608903 doi: https://doi.org/10.1201/978 1003 102403
Coskun, Cansu, Dikmen, Irem
Di Fiore, Monica Donyavi, Sohrab, Flanagan, Roger, Assadi-Langroudi, Arya and Parisi, Luana (2023) Understanding the complexity of materials procurement in construction projects to build a conceptual framework influencing supply chain management of MSMEs. International Journal of Construction Management. ISSN 2331-2327 doi: https://doi.org/10.1080/15623599.2023.2267862
Fellows, Morwenna F., Phua, Florence T. T.
Green, Stuart D.
Green, Stuart D.
Han, Shiyu, Yao, Runming
Huan, Xizhen
Kaya, Hazal Deniz and Dikmen, Irem
Kumar, Prashant, Omidvarborna, Hamid and Yao, Runming
Lavor, Vitor
Li, Teng, Essah, Emmanuel A.
Lo Piano, Samuele
Ming, Ru, Li, Baizhan, Du, Chenqiu, Yu, Wei, Liu, Hong, Kosonen, Risto
Ming, Ru
Mohareb, Eugene
Nikolić, Dragana and Ewart, Ian
Ongel, Begum, Tanyer, Ali Murat and Dikmen, Irem
Phua, Florence T. T. Rao, Yongchao, Wang, Shuli, Yang, Yan, Jia, Ru, Zhou, Shidong, Zhao, Shuhua and Wen, Chuang (2023) Experimental study and chemical affinity model on the inhibition of CO2 gas hydrate formation. Chemical Engineering Science, 281. 119158. ISSN 0009-2509 doi: https://doi.org/10.1016/j.ces.2023.119158
Saltelli, Andrea, Kuc-Czarnecka, Marta, Lo Piano, Samuele Schweber, Libby and Chow, Vivien (2023) Theory and the contribution of qualitative research to construction management research. In: Leiringer, Roine and Dainty, Andy (eds.) A Research Agenda for Construction Management. Elgar Research Agendas. Elgar. ISBN 9781800375444 (In Press)
Shariati, O. Soman, Ranjith, Nikolic, Dragana and Sanchez, Benjamin (2023) Building a sustainable future: extended reality as a catalyst for circular economy transition in the built environment. In: De Wolf, Catherine, Çetin, Sultan and Bocken, Nancy M. P. (eds.) A Circular Built Environment in the Digital Age. Springer, Cham. ISBN 9783031396748 (In Press)
Tanko, Bruno Lot, Essah, Emmanuel A. Whang, Seoung-Wook and Flanagan, Roger (2023) Understanding the competitiveness factors of Korean contractors in the international construction market. International Journal of Construction Management. ISSN 2331-2327 doi: https://doi.org/10.1080/15623599.2023.2239483 Whang, Seoung-Wook, Donyavi, Sohrab, Flanagan, Roger and Kim, Sangyong (2023) Contractor-led design risk management in international large project: Korean contractor’s perspective. Journal of Asian Architecture and Building Engineering, 22 (3). pp. 1387-1398. ISSN 1347-2852 doi: https://doi.org/10.1080/13467581.2022.2085718
Wu, Wentao, Benner, Jingru and Luo, Zhiwen
Xie, Xiaoxiong
Xie, Xiaoxiong
Xu, Tiantian, Yao, Runming
Yilmaz, Derya, Tanyer, Ali Murat and Toker, İrem Dikmen
Zhang, Ji, Hu, Xudong, Wu, Ding, Huang, Xiaohui, Wang, Xuehui, Yang, Yan and Wen, Chuang
Zhang, Shaoxing, Yao, Runming
Zhang, Xiaohai, Ramírez-Mendiola, José Luis 2022
Agbonaye, Osaru
Albattah, Mohammed, Shibeika, Amna Alnaser, Naser W., Flanagan, Roger, Kazmerski, Lawrence, Sayigh, Ali A., Nayfeh, Munir H. and Alnaser, Waheeb E. (2022) Worrying about climate change. Atmospheric and Climate sciences, 12 (2). pp. 441-461. ISSN 2160 0422 doi: https://doi.org/10.4236/acs.2022.122026
Atasoy, Guzide, Ertaymaz, Ugurcan, Dikmen, Irem
Berger, Jenny, Essah, Emmanuel
Bilgin, Gozde, Dikmen, Irem
Bilgin, Gizem, Erol, Huseyin, Atasoy, Guzide, Dikmen, Irem
Butt, Thomas, Mohareb, Eugene
Cao, Xinyun, Wang, Kaixuan, Xia, Lin, Yu, Wei, Li, Baizhan, Yao, Jinyang and Yao, Runming Castronovo, Fadi, Mastrolembo Ventura, Silvia and Nikolic, Dragana (2022) Virtual reality engineering summer camp: a pathway to architecture, engineering, and construction. In: International Conference on Construction Applications of Virtual Reality, 16-18 Nov 2022, Chung-Ang University, South Korea, pp. 1169-1177. Dikmen, Irem, Atasoy, Guzide, Erol, Huseyin, Kaya, Hazal Deniz and Birgonul, M. Talat (2022) A decision-support tool for risk and complexity assessment and visualization in construction projects. Computers in Industry, 141. 103694. ISSN 0166-3615 doi: https://doi.org/10.1016/j.compind.2022.103694 Donyavi, Sohrab, Parisi, Luana and Flanagan, Roger (2022) The paradigm shift needed by micro, small and medium sized enterprises to operate in the international construction market. In: International conference on the leadership and management of international construction projects in the digital age, 27-28 Nov 2022, Bahrain, pp. 43-50. Dowsett, Ruth Mary, Green, Martin Steve and Harty, Christopher Francis (2022) Speculation beyond technology: building scenarios through storytelling. Buildings and Cities, 3 (1). pp. 534-553. ISSN 2632-6655 doi: https://doi.org/10.5334/bc.213 (Special collection: Modern methods of construction: beyond productivity improvement)
Du, Chenqiu, Li, Baizhan, Yu, Wei, Yao, Runming Erol, Huseyin, Dikmen, Irem, Atasoy, Guzide and Birgonul, M. Talat (2022) An analytic network process model for risk quantification of mega construction projects. Expert Systems with Applications, 191. 116215. ISSN 0957-4174 doi: https://doi.org/10.1016/j.eswa.2021.116215 EzzEldin, A. A., Alnaser, N. W., Flanagan, R. and Alnaser, W. E. (2022) The feasibility of using rooftop solar PV fed to the grid for Khalifa Town houses in the Kingdom of Bahrain. Energy and Buildings, 276. 112489. ISSN 0378-7788 doi: https://doi.org/10.1016/j.enbuild.2022.112489 Flanagan, Roger (2022) The race to the future for the construction sector. In: Best, Rick and Meikle, Jim (eds.) Describing Construction Industries Projects and Firms. Routledge, London, pp. 276-293. ISBN 9781003102403 doi: https://doi.org/10.1201/9781003102403 Flanagan, Roger and Jewell, Carol, (2022) Quality planning for micro, small and medium sized enterprises. Technical Information Sheet. 6. Technical Report. Chartered Institute of Building, London. pp28. ISBN 9781739959210
Green, Stuart D.
Green, Stuart D.
Heidrich, Oliver
Hughes, Will Jewell, Carol and Flanagan, Roger, (2022) Logistics. Technical Information Sheet. 5. Technical Report. Chartered Institute of Building, London. pp20. ISBN 9781739959203
Korsavi, Sepideh S., Jones, Rory V. and Fuertes, Alba
Korsavi, S. S., Jones, Rory V. and Fuertes, Alba
Lee, Cen-Ying
Lo Piano, Samuele
Lo Piano, S.
Lo Piano, Samuele
Otero Peña, Daniel, Perrotti, Daniela and Mohareb, Eugene
Puy, Arnald, Becker, William, Lo Piano, Samuele
Qin, Beibei and Green, Stuart D.
Ramirez-Mendiola, Jose Luis
Ramirez-Mendiola, Jose Luis, Yunusov, Timur
Sadrizadeh, Sasan
Shariati, Omid Tagg, Adrian (2022) Guiding surveyors and protecting the public: the new RICS guidance note ‘Planned preventative maintenance of commercial and residential property’. Journal of Building Survey, Appraisal & Valuation, 10 (4). pp. 343-357. ISSN 2046-9594 Tagg, Adrian, (2022) What are your responsibilities in a PPM survey? RICS.org
Tagg, Adrian Tanko, Bruno Lot and Mbugua, Lawrence (2022) BIM education in higher learning institutions: a scientometric review and the Malaysia perspective. International Journal of Built Environment and Sustainability, 9 (1). pp. 23-37. ISSN 2289-8948 doi: https://doi.org/10.11113/ijbes.v9.n1.864 Tanko, Bruno Lot, Zakka, Wyom Paul and Heng, Wee Nie (2022) BIM in the Malaysian construction industry: a scientometric review and case study. Engineering, Construction and Architectural Management. ISSN 1365-232X doi: https://doi.org/10.1108/ECAM-04-2021-0324 Whang, Seoung-Wook, Donyavi, Sohrab, Flanagan, Roger and Kim, Sangyong (2022) Balanced approach for tendering practice at the pre-contract stage: the UK practitioner's perspective. Journal of Civil Engineering and Management, 28 (5). pp. 338-348. ISSN 1822-3605 doi: https://doi.org/10.3846/jcem.2022.16580
Xie, Xiaoxiong, Luo, Zhiwen
Xu, Tiantian, Yao, Runming
Zhang, Hongjie
Zhang, Xiaohai, Ramirez-Mendiola, José Luis 2021Ayerra, Inez, Castronovo, Fadi, Mastrolembo Ventura, Silvia and Nikolic, Dragana (2021) Next steps in BIM execution planning: a review of guides in the USA. In: European Conference on Computing in Construction, JUL 26-28, 2021, Online, pp. 277-284. doi: https://doi.org/10.35490/EC3.2021.150
Ayhan, Murat, Dikmen, Irem
Butt, Ben, Jones, Rory V. and Fuertes, Alba
Green, S. D.
Korsavi, Sepideh S., Jones, Rory V. and Fuertes, Alba
Korsavi, S. S., Jones, Rory V., Bilverstone, P. A. and Fuertes, Alba
Laryea, Sam and Essah, Emmanuel
Laryea, Sam and Essah, Emmanuel
Mirshekarlou, Babak Rahmani, Budayan, Cenk, Dikmen, Irem Nikolic, Dragana and Whyte, Jennifer (2021) Visualizing a new sustainable world: toward the next generation of virtual reality in the built environment. Buildings, 11 (11). 546. ISSN 2075-5309 doi: https://doi.org/10.3390/buildings11110546
Okudan, Ozan, Budayan, Cenk and Dikmen, Irem
Shibeika, Amna
Siddall, Mark, Essah, Emmanuel
Sonet, Ungku Norani, Klufallah, Mustafa, Peters, Michael D. and Dixon, Tim J. Tagg, Adrian, (2021) Accessibility needs more than compliance. RICS.org
Tanriverdi, Cenk, Atasoy, Guzide, Dikmen, Irem
Yao, Runming 2020
Casals, Miquel, Gangolells, Marta, Macarulla, Marcel, Forcada, Núria, Fuertes, Alba
Hafner, Rebecca J., Pahl, Sabine, Jones, Rory V. and Fuertes, Alba
Hafner, Rebecca, Fuertes, Alba Pothitou, Maroudia (2020) Small power use and working practices in office buildings. EngD thesis, University of Reading. doi: https://doi.org/10.48683/1926.00103903 Tagg, Adrian, (2020) Public and Commercial Attitudes to Disability in the Built Environment. Technical Report. University College of Estate Management pp76. Ulutas Duman, Dilek (2020) Strategy narratives in Turkish international contracting: Mobilising the past as a means of creating a heroic identity. PhD thesis, University of Reading. doi: https://doi.org/10.48683/1926.00101612 2019
Alencastro, João, Fuertes, Alba
Boomsma, Christine, Jones, Rory V., Pahl, Sabine and Fuertes, Alba
Bruce-Konuah, Adorkor, Jones, Rory V. and Fuertes, Alba
Bruce-Konuah, Adorkor, Jones, Rory V.
Bruce-Konuah, Adorkor, Jones, Rory V.
Laryea, Sam and Essah, Emmanuel
Laryea, Sam and Essah, Emmanuel Medas, Michael A. (2019) Embodied carbon in building services systems. EngD thesis, University of Reading. doi: https://doi.org/10.48683/1926.00085245 Rodriguez-Arguelles, Ana (2019) Improving small power energy estimations for energy audits in offices. EngD thesis, University of Reading. doi: https://doi.org/10.48683/1926.00084920 Tagg, Adrian (2019) Technical Due Diligence and Building Surveying for Commercial Property. Routledge Taylor & Francis Group, pp408. ISBN 9781138745186 2018
Alencastro, João, Fuertes, Alba
Boomsma, Christine, Hafner, Rebecca, Pahl, Sabine, Jones, Rory V. and Fuertes, Alba
Bruce-Konuah, Adorkor, Jones, Rory V., Fuertes, Alba
Giretti, A., Vaccarini, M., Casals, M., Macarulla, M., Fuertes, A. Lu, Weisheng, Ye, Meng, Chau, K. W. and Flanagan, Roger (2018) The paradoxical nexus between corporate social responsibility and sustainable financial performance: evidence from the international construction business. Corporate Social Responsibility and Environmental Management, 25 (5). pp. 844-852. ISSN 1535-3958 doi: https://doi.org/10.1002/csr.1501 Ofetotse, Eng Lebogang (2018) Investigating and characterising household electricity use in Botswana. PhD thesis, University of Reading. 2017
Alencastro, João, Fuertes, Alba Algithami, Sultan M. (2017) The use of a system dynamics approach for modelling maturity of Total Quality Management in Saudi construction firms. PhD thesis, University of Reading. Alsharif, Mohammed Ambarak (2017) Improving sustainability on university campuses in Saudi Arabia - an assessment of organisational and decision-related opportunities and barriers. PhD thesis, University of Reading. Amakali, Tangi Rebekka (2017) Inclusive design policy implementation: an organizational knowledge creation perspective. PhD thesis, University of Reading. Balila, Amal (2017) Enhancing strength and durability of adobe bricks by introducing bio-inspired stabilisers. PhD thesis, University of Reading.
Boomsma, Christine, Pahl, Sabine, Jones, Rory V. and Fuertes, Alba Che Haron, Roziha (2017) Systems thinking paradigm in construction cost estimating reliability. PhD thesis, University of Reading. Dania, Afolabi A. (2017) Sustainable construction at the firm level: case studies from Nigeria. PhD thesis, University of Reading.
Jones, Rory V.
Jones, Rory V., Fuertes, Alba Keeling, Trevor (2017) Developing a holistic set of parameters to evaluate and monitor indoor environmental quality. EngD thesis, University of Reading. Lowe, Stephen Richard (2017) Developing a sustainable method for the determination of bioaccessibility of organic contaminants from polluted sites. EngD thesis, University of Reading. Sawaf, Sahm (2017) Investigation of current wind lobby layout on energy consumption within food supermarkets. EngD thesis, University of Reading. Singh, Ankit (2017) Corporate Social Responsibility in construction firms operating in the UK. PhD thesis, University of Reading. Smith, Matthew J. (2017) The function of a green wall system when integrated with greywater treatment, recycling, and irrigation; exploration of water quality, watre resources and planting media. PhD thesis, University of Reading. Whang, Seoung-wook (2017) The influence of design-production management at the pre-production stage for major international projects in Korea. PhD thesis, University of Reading. Ye, Meng, Lu, Weisheng and Flanagan, Roger (2017) Corporate social responsibility localization in international construction business. In: Proceedings of the 21st International Symposium on Advancement of Construction Management and Real Estate. Springer, pp. 553-564. ISBN 9789811061905 doi: https://doi.org/10.1007/978-981-10-6190-5_50 2016Bevan, Whitney (2016) An investigation of the required skills for the delivery of low and zero carbon buildings within a region. PhD thesis, University of Reading.
Boomsma, Christine, Goodhew, Julie, Pahl, Sabine and Jones, Rory V. Boyd, N. J. Philippa (2016) From bicycles to buildings: a SCOT analysis of project level adoption of BIPV. PhD thesis, University of Reading. Daniels, Laura, Coker, Phil and Potter, Ben (2016) Embodied carbon dioxide of network assets in a decarbonised electricity grid. Applied Energy, 180. 142 - 154. ISSN 0306-2619 doi: https://doi.org/10.1016/j.apenergy.2016.07.044 Daniels, Laura, Coker, Phil, Gunn, Alice and Potter, Ben (2016) Using proxies to calculate the carbon impact of investment into electricity network assets. Applied Energy, 162. pp. 551-560. ISSN 0306-2619 doi: https://doi.org/10.1016/j.apenergy.2015.10.111
Jones, Rory V.
Jones, Rory V., Fuertes, Alba
Jones, Rory V. Keeling, Trevor P., Roesch, Etienne B. and Clements-Croome, Derek (2016) Cognitive appraisals affect both embodiment of thermal sensation and its mapping to thermal evaluation. Frontiers in Psychology, 7. 800. ISSN 1664-1078 doi: https://doi.org/10.3389/fpsyg.2016.00800 Rawlings, Jeremy (2016) Developing a method to assess demand side energy management opportunities from small and medium sized enterprises. EngD thesis, University of Reading. Ritzmann, Deborah, Wright, Paul S., Holderbaum, William and Potter, Ben (2016) A method for accurate transmission line impedance parameter estimation. IEEE Transactions on Instrumentation and Measurement, 65 (10). pp. 2204-2213. ISSN 0018-9456 doi: https://doi.org/10.1109/TIM.2016.2556920 Rodriguez, Ana, Smith, Stefan Thor, Kiff, Alan and Potter, Ben (2016) Small power load disaggregation in office buildings based on electrical signature classification. In: IEEE International Energy Conference, EnergyCon, 4-8 April, Leuven, Belgium, pp. 1-6. Yunusov, Timur, Frame, Damien, Holderbaum, William and Potter, Ben (2016) The impact of location and type on the performance of Low-Voltage network connected Battery Energy Storage Systems. Applied Energy, 165. pp. 202-213. ISSN 03062619 doi: https://doi.org/10.1016/j.apenergy.2015.12.045 Zangs, Maximilian J., Adams, Peter B. E., Yunusov, Timur, Holderbaum, William and Potter, Ben A. (2016) Distributed energy storage control for dynamic load impact mitigation. Energies, 9 (8). 647. ISSN 1996-1073 doi: https://doi.org/10.3390/en9080647 2015
Jones, Rory V.
Jones, Rory V., Fuertes, Alba Kurokawa, Megumi (2015) Tracing client interests in the course of a project: why are some client interests incorporated whereas others are not? PhD thesis, University of Reading. doi: https://doi.org/10.48683/1926.00108318 Maradza, Energy Nyasha (2015) Adaptation of industry BIM process standards in a large construction firm. PhD thesis, University of Reading. Moorey, Charles, Holderbaum, William and Potter, Ben (2015) Investigation of high-efficiency Wireless Power Transfer criteria of resonantly-coupled loops and dipoles through analysis of the figure of merit. Energies, 8 (10). pp. 11342-11362. ISSN 1996-1073 doi: https://doi.org/10.3390/en81011342 2014Cave-Ayland, Kim, Becerra, Victor, Potter, Ben and Shirsavar, Ali (2014) Systematic selection of analogue redesign method for forward-type digital power converters. International Journal of Electronics, 101 (5). pp. 667-680. ISSN 0020-7217 doi: https://doi.org/10.1080/00207217.2013.794486 Daniels, Laura, Potter, Ben and Coker, Phil (2014) Exploring methods to evaluate the carbon impact of network investment deferral. In: Innovative Smart Grid Technologies Conference Europe (ISGT-Europe), 2014 IEEE PES, 12-15th October 2014, Istanbul, pp. 1-6. Daniels, Laura, Walton, Paul, Potter, Ben and Coker, Phil (2014) Using standby generators in support of an electricity network: logistics and experience. In: CIBSE Technical Symposium 2014, 3rd - 4th April 2014, Dublin Technical Institute, Dublin, Ireland. Dlamini, Sitsabo (2014) The relationship of the construction sector to economic growth: analysis of South African and UK construction sectors. PhD thesis, University of Reading. doi: https://doi.org/10.48683/1926.00109244 Markakis, Antonios, Holderbaum, William and Potter, Ben (2014) Bond graph models of DC-DC converters operating in both CCM and DCM. International Journal of Power Electronics, 6 (1). pp. 18-41. ISSN 1756-6398 doi: https://doi.org/10.1504/IJPELEC.2014.060706
Mihara, Hitoshi, Kurokawa, Megumi, Hughes, Will Rowe, Matthew, Yunusov, Timur, Haben, Stephen, Holderbaum, William and Potter, Ben (2014) The real-time optimisation of DNO owned storage devices on the LV network for peak reduction. Energies, 7 (6). pp. 3537-3560. ISSN 1996-1073 doi: https://doi.org/10.3390/en7063537 Rowe, Matthew, Yunusov, Timur, Haben, Stephen, Singleton, Colin, Holderbaum, William and Potter, Ben (2014) A peak reduction scheduling algorithm for storage devices on the low voltage network. IEEE Transactions on Smart Grid, 5 (4). pp. 2115-2124. ISSN 1949-3053 doi: https://doi.org/10.1109/TSG.2014.2323115 Wei, Shen, Jones, Rory and De Wilde, Pieter (2014) Driving factors for occupant-controlled space heating in residential buildings. Energy and Buildings, 70. pp. 36-44. ISSN 1872-6178 doi: https://doi.org/10.1016/j.enbuild.2013.11.001 2013Daniels, Laura, Potter, Ben and Coker, Phil (2013) Financial implications for companies running standby generators in support of a smart grid. In: CISBAT 2013: CleanTech for Smart Cities & Buildings, 4th-6th September 2013, Lausanne, Switzerland, pp. 727-732.
Forcada, N., Fuertes, Alba
Forcada, N., Macarulla, M., Gangolells, M., Casals, M., Fuertes, Alba
Fuertes, Alba
Gangolells, M., Casals, M., Forcada, N., Fuertes, Alba Haben, Stephen, Rowe, Matthew, Vukadinovic Greetham, Danica, Grindrod, Peter, Holderbaum, William, Potter, Ben and Singleton, Colin (2013) Mathematical solutions for electricity networks in a low carbon future. In: Electricity Distribution (CIRED 2013), 22nd International Conference and Exhibition on, 10-13 June 2013, Stockholm, 0857-0857. doi: https://doi.org/10.1049/cp.2013.0972 Hallworth, Michael, Potter, Ben and Shirsavar, Ali (2013) Analytical calculation of resonant inductance for zero voltage switching in phase-shifted full-bridge converters. Power Electronics, IET, 6 (3). pp. 523-534. ISSN 1755-4543 doi: https://doi.org/10.1049/iet-pel.2012.0461
Macarulla, M., Forcada, N., Casals, M., Gangolells, M., Fuertes, Alba
Morillas, R.M., Rubio-Romero, J.C. and Fuertes, Alba Rowe, Matthew, Holderbaum, William and Potter, Ben (2013) Control methodologies: Peak reduction algorithms for DNO owned storage devices on the Low Voltage network. In: Innovative Smart Grid Technologies Europe (ISGT EUROPE), 2013 4th IEEE/PES, 6-9 Oct, Denmark, pp. 1-5. doi: https://doi.org/10.1109/ISGTEurope.2013.6695291 2012Cave-Ayland, Kim, Becerra, Victor, Potter, Ben and Shirsavar, Ali (2012) Choosing the most suitable analogue redesign method for forward-type digital power converters. In: IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), December 16-19, 2012, Bengaluru, India, pp. 1-6. doi: https://doi.org/10.1109/PEDES.2012.6484259
Forcada, N., Macarulla, M., Fuertes, Alba Mitchell, Richard, Harwin, William, Cadenas Medina, Oswaldo, Guy, Chris, Gong, Alex, Potter, Ben and Warwick, Kevin, eds. (2012) Cybernetics, Circuits and Computing. Pearson, Harlow, pp499. ISBN 9781780160672 2011
Forcada, N., Casals, M., Roca, X., Gangolells, M. and Fuertes, Alba
Gangolells, M., Casals, M., Gassó, S., Forcada, N., Roca, X. and Fuertes, Alba Markakis, Antonios, Holderbaum, William and Potter, Ben (2011) A comparison between bond graphs switching modelling techniques implemented on a boost dc-dc converter. In: 2011 IEEE 33rd International Telecommunications Energy Conference (INTELEC), 9-13th October 2011, Amsterdam, Netherlands, pp. 1-7. Yunusov, Timur, Holderbaum, William and Potter, Ben (2011) Cost function for sub-agent elements in multi-agent energy management system. In: Innovative Smart Grid Technologies (ISGT Europe) 2011, 5-7 Dec 2011, Manchester, UK, pp. 1-8. doi: https://doi.org/10.1109/ISGTEurope.2011.6162783 Yunusov, Timur, Holderbaum, William and Potter, Ben (2011) Sub-agent elements for control methods in multi-agent energy management system. In: 2011 IEEE 33rd International Telecommunications Energy Conference (INTELEC), 9-13th October 2011, Amsterdam, Netherlands, pp. 1-7. 2010
Forcada, N., Casals, M., Fuertes, Alba
Gangolells, M., Casals, M., Forcada, N., Roca, X. and Fuertes, Alba PHILLIPS LYTLE LLP (2010) Wind turbine blade pitch control system. US20100061852. doi: US20100061852 2009
Gangolells, M., Casals, M., Gassó, S., Forcada, N., Roca, X. and Fuertes, Alba Giambona, G. and Birchall, D.W. (2009) The role of knowledge management in supporting innovation in service operations. In: ECKM 2009, Vicenza, Italy. Giambona, G, Silburn, N. J. L. and Birchall, D. W. (2009) Trust, virtual teams and grid technology. In: Bessis, N. (ed.) Grid Technology for Maximising Collaborative Decision Management and Support: Advancing Effective Virtual Organisations. IGI Global, Hershey, Pennsylvania. ISBN 1605663646 Leiringer, R. (2009) Policy, finance & management for public-private partnerships (review). Construction Management and Economics, 27 (6). pp. 609-610. ISSN 0144-6193 doi: https://doi.org/10.1080/01446190902912301 Li, Q. (2009) Power relation and its impact on innovative practice decisions in healthcare infrastructure project organisation. In: 5th Nordic Conference on Construction Economics and Organisation, Reykjavik, Iceland. Mann, P. and Denoncourt, J. (2009) Copyright issues on the protection of architectural work and designs. In: 25th Annual ARCOM Conference, Albert Hall, Nottingham. Moran, Stuart and Nakata, Keiichi (2009) Ubiquitous monitoring and behavioural change: a semiotic perspective. In: 11th ICISO (IFIP WG8.1 Working Conference): Information systems in the changing era: theory & practice, 11-12 Apr 2009, Beijing, China, pp. 449-456. doi: https://doi.org/10.1109/CSE.2009.46 Ness, K. (2009) Not just about bricks: the invisible building worker. In: 25th Annual ARCOM Conference, Nottingham, UK. Potter, Benjamin Alexander and Shirsavar, Seyed Ali (2009) Contactless power transfer system for rotating applications. WindTech International. pp. 32-35. Strang, M.A., Bonser, R.H.C. and Fitzgerald, A.M. (2009) Blended learning: what’s in it for me? In: 1st Defence Academies and Colleges e-Learning Conference. Wang, J. (2009) The measurement of healthcare delivery performance within a new built hospital. In: Taiwanese Symposium, Bristol. 2008Arkani, S. (2008) Innovation in the planning and delivery of infrastructure in the National Health Service. In: Redefining healthcare infrastructure, integrating services, technologies and the built environment, Imperial College, London. Arkani, S. (2008) The business case development process in the delivery of NHS infrastructure. In: Building abroad, procurement of construction and reconstruction projects in the international context i-Rec, CIB W92, CIB TG63 and CIB W107, University of Montreal, Canada, p. 14. Birchall, D. W. and Giambona, G. (2008) Who is on the other side of the screen? Learning in a virtual environment. In: Kautonen, T. and Karjaluoto, H. (eds.) Trust and New Technologies: Marketing and Management on the Internet and Mobile Media. Edward Elgar Publishing, Cheltenham, pp. 205-226. ISBN 9781847205681 Birchall, D. W. and Giambona, G. (2008) The impact of ICT on the work patterns of managers and their organisations. EuroMed Journal of Business, 3 (3). pp. 244-262. ISSN 1450-2194 doi: https://doi.org/10.1108/14502190810906428 Cardellino, P. (2008) Understandings of design quality: The cases of the buildings schools for the future programme. In: CIB2008 Transformation through Construction, Dubai. Chakinala, A. G., Bremner, D. H., Gogate, P. R., Namkung, K. C. and Burgess, A. E. (2008) Multivariate analysis of phenol mineralisation by combined hydrodynamic cavitation and heterogeneous advanced Fenton processing. Applied Catalysis B-Environmental, 78 (1-2). pp. 11-18. ISSN 0926-3373 doi: https://doi.org/10.1016/j.apcatb.2007.08.012 Dikmen, I., Birgonul, M. T., Anac, C., Tah, J. H. M. and Aouad, G. (2008) Learning from risks: A tool for post-project risk assessment. Automation in Construction, 18 (1). pp. 42-50. ISSN 0926-5805 doi: https://doi.org/10.1016/j.autcon.2008.04.008 Ejohwomu, O.A., Proverbs, G.D. and Olomolaiye, P.O. (2008) The impact of multiskilling on UK construction manpower. ICE Management, Procurement and Law, 161 (1). pp. 25-30. ISSN 1751-4304 doi: https://doi.org/10.1680/mpal.2008.161.1.25
Forcada, N., Casals, M., Gangolells, M., Roca, X. and Fuertes, Alba Giambona, G. and Birchall, D. W. (2008) How to engage SMEs through a development programme based on virtual action learning – A cross-country study. In: ICELW 2008, Columbia University, New York. Giambona, G., Birchall, D. W. and Silburn, N. L. J. (2008) Collaborative e-learning and SME managers – An Italian case. In: ICL2008, Villach, Austria. Giambona, G. and Birchall, D.W. (2008) Developing an engaging virtual action learning programme for SME managers – A UK perspective. International Journal: Advanced Corporate Learning, 1 (1). pp. 9-16. ISSN 1867-5565 Hillig, J.B. and W.P., Hughes (2008) Ownership rights in performance-based contracting: A case study of English law. In: COBRA RICS Construction and Building Research Conference, Dublin, Ireland. Hoezen, M. and Hillig, J.B. (2008) The competitive dialogue procedure: Advantages, disadvantages, and its implementation into English and Dutch law. In: COBRA RICS Construction and Building Research Conference, Dublin, Ireland. Leiringer, R. (2008) Adapting to PFI: substantive and symbolic management of legitimacy in construction. Journal of Construction Procurement, 14 (1). pp. 51-65. ISSN 1358-9180 Leiringer, R. (2008) Book review: Redefining the corporation: Stakeholder management and organizational wealth: James E. Post, Lee E. Preston and Sybille Sachs. Construction Management and Economics, 26 (6). p. 671. ISSN 0144-6193 doi: https://doi.org/10.1080/01446190802108968 Leiringer, R. (2008) Book review: Stakeholder theory and organizational ethics. Construction Management and Economics, 26 (6). pp. 671-672. ISSN 0144-6193 doi: https://doi.org/10.1080/01446190802108968 Leiringer, R. and Cardellino, P. (2008) Tales of the expected: investigating the rhetorical strategies of innovation champions. Construction Management and Economics, 26 (10). pp. 1043-1054. ISSN 0144-6193 doi: https://doi.org/10.1080/01446190802389394 Lu, W., Shen, L. and Yam, M. (2008) Critical success factors for competitiveness of contractors: A China study. Journal of Construction Management and Engineering, 134 (2). pp. 972-982. ISSN 1943-7862 doi: https://doi.org/10.1061/(ASCE)0733-9364(2008)134:12(972) Odeh, N. A. and Cockerill, T. T. (2008) Life cycle GHG assessment of fossil fuel power plants with carbon capture and storage. Energy Policy, 36 (1). pp. 367-380. ISSN 0301-4215 doi: https://doi.org/10.1016/j.enpol.2007.09.026 Odeh, N. A. and Cockerill, T. T. (2008) Life cycle analysis of UK coal fired power plants. Energy Conversion and Management, 49 (2). pp. 212-220. ISSN 0196-8904 doi: https://doi.org/10.1016/j.enconman.2007.06.014 Shipworth, D. (2008) Models, mathematics and meaning in interdisciplinary research. In: European Consortium for Mathematics in Industry conference (ECMI 2008) - Mini-Symposium 31 on ‘The Social Life of Mathematics’, University College, London. Spinks, N., Reid, B. and Giambona, G. (2008) Getting the facts straight: evidence and the semiotic triangle. In: BAM 2008 - Research Methodology track, Harrogate. Wang, J. (2008) Comparative performance of UK PFI and non-PFI hospitals. In: CIB 2008 Transformation through Construction, Dubai. Wu, S. and Noy, P. (2008) A conceptual design of a wireless sensor actuator system for optimising energy and well-being in a building. Intelligent Buildings International, 2 (1). pp. 41-56. ISSN 1750-8975 doi: https://doi.org/10.3763/inbi.2009.0032 Wyeth, D. J. (2008) An investigation into the mechanics of cutting using data from orthogonally cutting Nylon 66. International Journal of Machine Tools & Manufacture, 48 (7-8). pp. 896-904. ISSN 0890-6955 doi: https://doi.org/10.1016/j.ijmachtools.2007.11.001 2007Bonser, R. H. C. and Vincent, J. F. V. (2007) Technology trajectories, innovation, and the growth of biomimetics. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 221 (10). pp. 1177-1180. ISSN 0954-4062 doi: https://doi.org/10.1243/09544062jmes522 Hillig, J.B. (2007) The contractor's quality obligations: different concepts under English and German contract law. In: Proceedings CIB World Construction Congress: Construction for Development, Cape Town, South Africa, pp. 2169-2181. Humphries, S., Bonser, R. H. C., Witton, M. P. and Martill, D. M. (2007) Did pterosaurs feed by skimming? Physical modelling and anatomical evaluation of an unusual feeding method. PLoS Biology, 5 (8). pp. 1647-1655. ISSN 1544-9173 doi: https://doi.org/10.1371/journal.pbio.0050204 Klemeš, J., Bulatov, I. and Cockerill, T. (2007) Techno-economic modelling and cost functions of CO2 capture processes. Computers & Chemical Engineering, 31 (5/6 (Speci). pp. 445-455. ISSN 0098-1354 doi: https://doi.org/10.1016/j.compchemeng.2006.06.002 Lu, W., Yohannes, I., Pekericli, M.K. and Hillig, J-B. (2007) Incentives to overcome barriers to information/knowledge sharing in construction. In: KIM Conference, Loughborough. Potter, Benjamin Alexander, Shirsavar, Seyed Ali and McCulloch, M.D. (2007) Study of the variation of the input impedance of induction machines with frequency. IET Electric Power Applications, 1 (1). pp. 36-42. ISSN 1751-8660 doi: https://doi.org/10.1049/iet-epa:20050524 Santulli, C. (2007) Impact properties of glass/plant fibre hybrid laminates. Journal of Materials Science, 42 (11). pp. 3699-3707. ISSN 0022-2461 doi: https://doi.org/10.1007/s10853-006-0662-y Shen, L., Bao, H., Wu, Y. and Lu, W. (2007) Using bargaining-game theory for negotiating concession period for BOT-type contract. Journal of Construction Management and Engineering, 133 (5). pp. 385-392. ISSN 1943-7862 doi: https://doi.org/10.1061/(ASCE)0733-9364(2007)133:5(385) Shipworth, D. (2007) Forum - The Stern review: implications for construction. Building Research and Information, 35 (4 (Special). pp. 478-484. ISSN 0961-3218 doi: https://doi.org/10.1080/09613210701330123 Shipworth, D. (2007) Truth in complex adaptive systems models should be based on truth by constructive verification. In: Aerts, D., Edmonds, B. and Gershenson, C. (eds.) Worldviews, Science and Us: Philosophy and Complexity. World Scientific, New York, pp. 141-155. ISBN 9789812705488 9789812707420 (ebook) Shipworth, M. (2007) Changes in English home heating practices from 1984 to 2007: empirical data from a replication survey. In: The 7th biennial conference on Environmental Psychology, Bayreuth, Germany. Wu, S. M. and Li, H. Q. (2007) Warranty cost analysis for products with a dormant state. European Journal of Operational Research, 182 (3). pp. 1285-1293. ISSN 0377-2217 doi: https://doi.org/10.1016/j.ejor.2006.09.056 2006Bonser, R.H.C. (2006) Patented biologically-inspired technological innovations: A twenty year view. Journal of Bionic Engineering, 3 (1). pp. 39-41. ISSN 1672-6529 doi: https://doi.org/10.1016/S1672-6529(06)60005-X Cardellino, P. and Finch, E. (2006) Mapping IT innovation in Facilities Management. Electronic Journal of Information Technology in Construction, 11 (Specia. pp. 673-684. Cardellino, P. and Finch, E. (2006) Evidence of systematic approaches to innovation in facilities management. Journal of Facilities Management, 4 (3). ISSN 1472-5967 doi: https://doi.org/10.1108/14725960610673742 Chen, Z. and Li, H. (2006) Discussion of “Risks in Chinese construction market—contractors' perspective” by Dongping Fang, Mingen Li, Patrick Sik-wah Fong, and Liyin Shen. Journal of Construction Management and Engineering, 132 (3). pp. 327-328. ISSN 1943-7862 doi: https://doi.org/10.1061/(ASCE)0733-9364(2006)132:3(327) Chen, Z. and Li, H. (2006) Environmental management in construction. Spon Press, London and New York, pp211. ISBN 9780415370554 Chen, Z., Hong, J., Li, H. and Zu, Q. (2006) A case study of intelligent buildings: Manchester stadium. In: Proceedings of the Sixth International Conference for Enhanced Building Operations: Intelligent Stadia and Sports Buildings, Shenzhen, China. Chen, Z., Li, H. and Baldwin, A. N. (2006) Discussion of "Waste-based management in residential construction" by Jing Zhang, Danelle L. Eastham, and Leonhard E. Bernold. Journal of Construction Management and Engineering, 132 (9). p. 1019. ISSN 1943-7862 doi: https://doi.org/10.1061/(asce)0733-9364(2005)131:4(423) Chen, Z., Li, H., Fan, L.C.N. and Xu, Q. (2006) Environmental ethics and key performance management in China. The Construction Information Quarterly, 8 (1). pp. 77-84. ISSN 1469-4891 Chen, Z., Li, H., Kong, S. C. W., Hong, J. and Xu, Q. (2006) E-commerce system simulation for construction and demolition waste exchange. Automation in Construction, 15 (6). pp. 706-718. ISSN 0926-5805 doi: https://doi.org/10.1016/j.autcon.2005.09.003 Chen, Z., Li, H., Kong, S.C.W. and Xu, Q. (2006) An analytic knowledge network process for construction entrepreneurship education. Journal of Management Development, 25 (1). pp. 11-27. ISSN 0262-1711 doi: https://doi.org/10.1108/02621710610637936 Chen, Z., Li, H., Kong, S.C.W., Hong, J. and Xu, Q. (2006) Process simulation for e-commerce systems: a case study of a sustainable construction industry. In: Khosrow-Pour, M. (ed.) Encyclopedia of E-Commerce, E-Government and Mobile Commerce. Information Resources Management Association, USA, Hershey, pp. 933-940. ISBN 9781591407997 Chung, J.K.H., Shen, G., Kumaraswamy, M.M., Ekambaram, P. and Chen, Z. (2006) A value framework for contractor selection. In: 8th International Value Management Conference & Inaugural Asia Pacific Value Convention, Hong Kong, pp. 396-306. Cockerill, T.T., Klemes, J. and Bulatov, I. (2006) A model for the whole-system assessment of Carbon Dioxide Capture and Storage options for deployment in the UK. In: Eighth Greenhouse Gas Abatement Technologies Conference (GHGT-8), Trondheim, Norway. Croome, D. C., Wu, M. and Li, S. R. (2006) A sensor based intelligent building assessment model. In: Zhao, Z. Y., Yu, M. X., Feng, C. C. and Duan, L. L. (eds.) Proceedings of CRIOCM 2006 International Research Symposium on Advancement of Construction Management and Real Estate, Vols 1 and 2. Hong Kong Polytechnic Univ, Kowloon, pp. 91-99. ISBN 9623675364 Czaban, L. and Li, Q. (2006) Why does home country influence disappear in international business research?- the evidence from distribution channel management in foreign companies in China. In: Asia Academy of Management 5th Conference, Tokyo. Fernie, S., Leiringer, R. and Thorpe, T. (2006) Change in construction: a critical perspective. Building Research and Information, 34 (2). pp. 91-103. ISSN 0961-3218 doi: https://doi.org/10.1080/09613210500491639 Gough, C., Shackley, S., Holloway, S., Cockerill, T.T., Bentham, M., Bulatov, I., McLachlan, C. and Klemes, J. (2006) An integrated assessment of carbon dioxide capture and storage in the UK. In: Eighth Greenhouse Gas Abatement Technologies Conference (GHGT-8), Trondheim. Hillebrandt, P.M. (2006) The construction industry and its resources: a research agenda. Journal of Construction in Developing Countries, 11 (1). pp. 37-51. ISSN 1823-6499 Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) Information visualization approach to intelligent buildings assessment. Journal of Harbin Institute of Technology. ISSN 1005-9113 Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) A data and knowledge management system for intelligent buildings. In: 6th International Conference for Enhanced Building Operations, Shenzhen, China. Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) A decision-making model for the Asian Intelligent Building Index. Journal of Harbin Institute of Technology. ISSN 1005-9113 Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) A decision-making model for the Asian Intelligent Building Index. In: 6th International Conference for Enhanced Building Operations, Shenzhen, China. Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) An integrative methodology of intelligent buildings assessment. In: 2nd International Conference on Intelligent Green and Energy Efficient Buildings, Beijing, China. Hong, J., Chen, Z., Li, H. and Xu, Q. (2006) A review of quantitative approaches to intelligent buildings assessment. In: 6th International Conference for Enhanced Building Operations, Shenzhen, China. Klemes, J., Bulatov, I. and Cockerill, T. T. (2006) The engineering feasibility of CCS in the UK. In: Shackley, S. (ed.) Carbon Capture and its Storage. Ashgate, pp. 43-87. ISBN 9780754644996 Langston, C. and Wu, M. (2006) A comparative study of construction industry size and structure between the UK and Australia and the significance of industry fragmentation. International Journal of Construction Management, 6 (1). pp. 45-61. Leiringer, R. (2006) Technological innovation in the context of PPPs: incentives, opportunities and actions. Construction Management and Economics, 24 (3). pp. 301-308. ISSN 0144-6193 doi: https://doi.org/10.1080/01446190500435028 Liu, G.W., Luo, Q., Shen, Q.P. and Wu, M. (2006) The need for value management in the process of construction project developments in China: A systematic perspective. In: Chinese Research Institute of Construction Management 2006 Annual Conference, Beijing, China, pp. 275-284. Liu, T. and Wu, M. (2006) Alliance in supply chain management. Journal of Supply Chain Science and Technology (8). pp. 6-9. Lomas, K., Oreszczyn, T., Shipworth, D., Wright, A.J. and Summerfield, A.J. (2006) Carbon reduction in buildings (CaRB) - Understanding the social and technical factors that influence energy use in UK buildings. In: RICS Annual Conference Cobra 2006, University College, London, p. 14. Lowe, D. and Leiringer, R., eds. (2006) Commercial management of projects: Defining the discipline. Wiley-Blackwell, London. ISBN 9781405124508 Lowe, D. and Leiringer, R. (2006) Commercial management – defining the discipline? In: Lowe, D. and Leiringer, R. (eds.) Commercial management of projects: Defining the discipline. Wiley-Blackwell, London, pp. 1-17. ISBN 9781405124508 Paxton, H., Bonser, R. H. C. and Winwood, K. (2006) Regional variation in the microhardness and mineralization of vertebrae from brown and rainbow trout. Journal of Fish Biology, 68 (2). pp. 481-487. ISSN 0022-1112 doi: https://doi.org/10.1111/j.1095-8649.2006.00926.x Potter, B. A. and Shirsavar, S. A. (2006) Design, implementation and characterisation of a contactless power transfer system for rotating applications. In: IECON 2006 32nd Annual Conference on IEEE Industrial Electronics, pp. 2168-2173. Santulli, C. (2006) Post-impact flexural tests on jute/polyester laminates monitored by acoustic emission. Journal of Materials Science, 41 (4). pp. 1255-1259. ISSN 0022-2461 doi: https://doi.org/10.1007/s10853-005-4235-2 Shen, L., Lu, W. and Yam, M. (2006) Contractor key competitiveness indicators: A China study. Journal of Construction Management and Engineering, 132 (4). pp. 416-424. ISSN 1943-7862 doi: https://doi.org/10.1061/(ASCE)0733-9364(2006)132:4(416) Shen, Qiping and Chung, Jacky K. H. (2006) The use of information technology by the quantity surveying professionals in Hong Kong. International Journal of Project Management, 25 (2). pp. 134-142. ISSN 0263-7863 doi: https://doi.org/10.1016/j.ijproman.2006.09.005 Shipworth, D. (2006) Qualitative modelling of sustainable energy scenarios: An application and extension of the Bon Qualitative Input-Output model. Construction Management and Economics, 24 (7 (Special). pp. 695-703. ISSN 0144-6193 doi: https://doi.org/10.1080/01446190600658917 Shirsavar, S. A., Potter, Benjamin A. and Ridge, I. M. L. (2006) Three-phase machines and drives - equipment for a laboratory-based course. IEEE Transactions on Education, 49 (3). pp. 383-388. ISSN 0018-9359 doi: https://doi.org/10.1109/TE.2006.879266 Shirsavar, S. A., Potter, B. A. and Ridge, I. A. L. (2006) Three-phase machines and drives - Equipment for a laboratory-based course. IEEE Transactions on Education, 49 (3). pp. 383-388. ISSN 0018-9359 doi: https://doi.org/10.1109/te.2006.879266 Wu, M. (2006) The EOQ-JIT cost indifference point. In: 5th Chinese Supply Chain Management Annual Conference, Wu Han, China, pp. 497-507. Wu, M. and Dai, X.F. (2006) An investigation: JIT implementation status in the ready-mixed concrete industry. In: Modern Supply Chain Management, Qwenming, P.R. China, pp. 308-312. Wu, M. and Du, C.L. (2006) Assessing material suppliers using a fuzzy analytical hierarchy process approach. In: Modern Supply Chain Management, Qwenming, P.R. China, pp. 254-259. Wu, M. and Low, S. P. (2006) JIT purchasing versus EOQ with a price discount: An analytical comparison of inventory costs in the ready mixed-concrete industry. Journal of Building & Construction Management, 10 (1). pp. 28-37. Wu, M. and Low, S.P. (2006) EOQ, JIT and fixed costs in the Ready-mixed concrete industry. International Journal of Production Economics, 102 (1). pp. 167-180. ISSN 0925-5273 doi: https://doi.org/10.1016/j.ijpe.2005.03.002 Wu, M. and Xu, M.Z. (2006) A model for comparative analysis of inventory costs of JIT and EOQ purchasing in the ready mixed concrete industry. Materials Science Forum, 532-533. pp. 1020-1023. ISSN 1662-9752 doi: https://doi.org/10.4028/www.scientific.net/MSF.532-533.1020 Wu, M. and Zhang, Y.L. (2006) EOQ-JIT cost indifference point in the ready-mixed concrete industry. In: Modern Supply Chain Management, Qwenming, P.R. China, pp. 249-253. Wu, M., Liu, C.L. and Picken, D. (2006) Discussion of 'modelling a contractor's markup estimation' by Min Liu and Yean Yng Ling. Journal of Construction Management and Engineering, 132 (6). pp. 658-661. ISSN 1943-7862 doi: https://doi.org/10.1061/(ASCE)0733-9364(2005)131:4(391) Wu, M., Xu, M.Z. and Liu, G.W. (2006) An integrated theory for construction project logistics management. In: Chinese Research Institute of Construction Management 2006 Annual Conference, Beijing, China, pp. 122-127. Wu, M., Zhang, Y. and Xu, M.Z. (2006) EOQ-JIT cost indifference point under a price discount scheme. In: Logistics Research Network Annual Conference, Newcastle, UK, pp. 512-516. Wu, M., Zhang, Y. and Xu, M.Z. (2006) The theoretical advantage of JIT purchasing is probably overstated. In: Chinese Research Institute of Construction Management 2006 Annual Conference, Beijing, China, pp. 117-121. Xu, M.Z. and Wu, M. (2006) A cash flow state equation of construction project based on interim payment estimates and its application. In: Chinese Research Institute of Construction Management 2006 Annual Conference, Beijing, China, pp. 219-225. Xu, M.Z. and Wu, M. (2006) The evaluation of Ro-Ro shipment in Yangtze River and its development policy. In: Logistics Research Network Annual Conference 2006, Newcastle, UK, pp. 517-521. Xu, M.Z., Liang, Y.X., Wu, M. and Li, S.Y. (2006) The assessment of Ro-Ro shipments in Yangzhu River and the strategy. In: 5th Chinese Supply Chain Management Annual Conference, Wu Han, China. 2005Ancell, D. (2005) Reducing costs: a practical application of performance-based specification and transaction cost theories. In: ARCOM, School of Oriental and African Studies, London. Avdelidis, N.P., Nelson, L.J. and Almond, D.P. (2005) Quantitative thermal imaging analysis of aircraft materials: through skin sensing (Invited Paper). Thermosense XXVII, 5782. pp. 324-333. doi: https://doi.org/10.1117/12.592437 Bakó-Biró, Z. and Olesen, B. W., (2005) Effects of indoor air quality on health, comfort and productivity. Velux Danmark A/S, International Centre for Indoor Environment and Energy (ICIEE), Technical University of Denmark. Bakó-Biró, Zs., Wargocki, P., Wyon, D.P. and Fanger, P.O. (2005) Poor indoor air quality slows down metabolic rate of office workers. In: Indoor Air 2005, Beijing, The 10th International Conference on Indoor Air Quality and Climate, Beijing, China. Bakó-Biró, Zs., Weschler, C.J., Wargocki, P. and Fanger, P.O. (2005) Effects of indoor pollution sources and ventilation rate on ozone's surface removal rate and the occurrence of oxygenated VOCs in an office space. In: Indoor Air 2005 The 10th International Conference on Indoor Air Quality and Climate, Beijing. Barrett, J. (2005) Support and information needs of older and disabled older people in the UK. Applied Ergonomics, 36 (2). pp. 177-183. ISSN 0003-6870 doi: https://doi.org/10.1016/j.apergo.2004.10.006 Bonser, R.H.C. (2005) What is biomimetics? Biological Sciences Review, 17 (4). pp. 21-23. Bonser, R.H.C. (2005) A design for life. Materials World, 13 (4). p. 21. ISSN 0967-8638 Bonser, R.H.C. (2005) Science to get one's teeth into. Journal of Experimental Biology, 208 (17). iv. ISSN 0022-0949 doi: https://doi.org/10.1242/jeb.01801 Cardellino, P. and Finch, E. (2005) The nature of innovation cultures in facilities management. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki. Carvajal, A. (2005) Quantitative comparison between the use of 3D vs 2D visualization tools to present building design proposals to non-spatial skilled end users. In: Banissi, E., Sarfraz, M., Roberts, J. C., Loften, B., Ursyn, A., Burkhard, R. A., Lee, A. and Andrienko, G. (eds.) Ninth International Conference on Information Visualisation, Proceedings. Ieee Computer Soc, Los Alamitos, pp. 291-294. ISBN 0769523978 doi: https://doi.org/10.1109/IV.2005.103 Chen, Z. (2005) A knowledge-driven multicriteria decision support system for intelligent building assessment. In: International Conference on Construction and Real Estate Management, Penang, Malaysia. Chen, Z. and Li, H. (2005) Discussion: ISO 14000 and the construction industry: survey in China. Journal of Management in Engineering, 21 (3). pp. 107-115. ISSN 0733-9364 doi: https://doi.org/10.1061/sASCEd0742-597Xs2003d19:3s107d Chen, Z. and Li, H. (2005) EnvironalPlanning: an analytical network process model for environmentally conscious construction planning. Journal of Construction Management and Engineering, 131 (1). pp. 92-101. ISSN 1943-7862 doi: https://doi.org/10.1061/(ASCE)0733-9364(2005)131:1(92) Chen, Z. and Li, H. (2005) A knowledge-driven management approach to environmental-conscious construction. Construction Innovation, 5 (1). pp. 27-39. Chen, Z., Abdullah, A., Anumba, C., Li, H. and Xu, Q. (2005) Deconstruction plan assessment using multi-criteria decision-making methods. In: Wang, Y. (ed.) Proceedings of 2005 International Conference on Construction & Real Estate Management, Vols 1 and 2 - CHALLENGE OF INNOVATION IN CONSTRUCTION AND REAL ESTATE. China Architecture & Building Press, Beijing, pp. 465-469. ISBN 7112078717 Chen, Z., Abdullah, A., Chimay, A., Li, H. and Xu, Q. (2005) A decision support system for sustainable deconstruction and demolition projects. Computer-Aided Civil and Infrastructure Engineering. Chen, Z., Bakker, H.C., Kong, S.C.W., Chung, J.K.H., Li, H., Shen, G.Q.P. and Xu, Q. (2005) A remote expert system model for concrete crack diagnosis. In: AEC2005: the 3rd International Conference on Innovation in Architecture, Engineering and Construction, Rotterdam, The Netherlands. Chen, Z., Li, H., Khalfan, M. and Kong, S. (2005) GreenPartner: A decision-making model for sustainable partnerships in construction. In: 2nd International SCRI Research Symposium, University of Salford, UK. Chen, Z., Li, H., Kong, S. and Xu, Q. (2005) A decision support model for partner selection in sustainable construction. In: Bear 2006: Construction Sustainability and Innovation, Hong Kong. Cotton, J.R., Winwood, K., Zioupos, P. and Taylor, M. (2005) Damage rate is a predictor of fatigue life and creep strain rate in fatigue of tensile human cortical bone samples. Journal of Biomechanical Engineering, 127 (2). pp. 213-210. ISSN 0148-0731 doi: https://doi.org/10.1115/1.1865188 Flanagan, S.C. (2005) Obtaining guidance. In: Bright, K. (ed.) Disability: Making Buildings Accessible Special Report, 2003. Workplace Law Network, pp. 147-151. ISBN 1900648482 Gough, C., Shackley, S., Holloway, S., Cockerill, T.T., Bentham, M., Bulatov, I., McLachlan, C. and Klemes, J., (2005) An integrated assessment of carbon dioxide capture and storage in the UK. Report. Tyndall Centre Gruneberg, S. (2005) Migrant construction workers before and after EU Expansion: Report on a seminar held at the University of Reading, 26th November 2004. Construction Labour Review, 4. pp. 52-4. Gruneberg, S. (2005) Output differences of specialist firms in the UK building industry. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki. Gruneberg, S. (2005) Review: Peter Reed, "Railtracks in the Sky: ‘New’ Labour, Air Transport Deregulation and the Competitive Market". Journal of Air Transport Management, 11 (4). pp. 297-298. ISSN 0969-6997 doi: https://doi.org/10.1016/j.jairtraman.2004.11.004 Gruneberg, S. (2005) The economics of construction labour - a discussion paper. In: CIB, Helsinki. Gruneberg, S., (2005) The management of site management training: The national construction college site management course. CITB-Construction Skills, Bircham Newton. Gruneberg, S. (2005) The performance of major firms in the heating and ventilating industry. In: ARCOM, School of Oriental and African Studies, London. Gruneberg, S. (2005) The requirements and expectations of site management training courses in Britain: do courses meet the requirements? The case of the CITB site management course. In: EPSRC Seminar, University of Westminster. Henricsson, J.P.E. and Ericsson, S. (2005) Measuring construction industry competitiveness: A holistic approach. In: QUT Research Week 2005, Brisbane. Hobbs, R. E. and Ridge, I. M. L. (2005) Torque in mooring chain. Part 1: Background and theory. Journal of Strain Analysis for Engineering Design, 40 (7). pp. 703-713. ISSN 0309-3247 doi: https://doi.org/10.1243/030932405x30867 Hong, J., Chen, Z., Li, H., Shen, G.Q.P., Chung, J.K.H. and Xu, Q. (2005) A multicriteria lifespan energy efficiency approach to intelligent building assessment. In: The 5th China Urban Housing Conference, Hong Kong. Huang, C. and Fisher, N. (2005) An alternative methodology for selecting enterprise resource planning systems. International Journal of Construction Management, 5 (1). pp. 39-57. Ibarra-Castanedo, C., Avdelidis, N.P. and Maldague, X. (2005) Quantitative pulsed phase thermography applied to steel plates. Thermosense XXVII, 5782. pp. 342-351. doi: https://doi.org/10.1117/12.602360 Khalfan, M., Kashyap, M. and Chen, Z. (2005) Readiness assessment for sustainable construction. In: 2nd International SCRI Research Symposium, University of Salford, UK. Klemeš, J., Bulatova, I. and Cockerill, T. (2005) Economic modelling and cost functions of CO2 capture processes. In: European Symposium on Computer Aided Process Engineering. Kong, S., Anumba, C., Li, H. and Chen, Z. (2005) Adopting standardized construction products information for interoperable catalogue. In: AEC2005: the 3rd International Conference on Innovation in Architecture, Engineering and Construction, Rotterdam, The Netherlands. Kong, S.C.W., Li, H., Hung, Y.L.T., Anumba, C. and Chen, Z. (2005) Web services enhanced interoperable construction products catalogue. Automation in Construction, 14 (3). pp. 343-352. doi: https://doi.org/10.1016/j.autcon.2004.08.008 Leiringer, R., Fernie, S. and Sörensen, N. (2005) Adopting partnering in Sweden: A critical perspective. In: Combining Forces, Advancing Facilities Management and Construction through Innovation, Helsinki. Li, H., Chen, Z. and Kong, S. (2005) Application of integrated GPS and GIS technology for reducing construction waste and improving construction efficiency. Automation in Construction, 14 (3). pp. 323-331. ISSN 0926-5805 doi: https://doi.org/10.1016/j.autcon.2004.08.007 Lowe, D.J. and Leiringer, R. (2005) Commercial management in project-based organisations. Journal of Financial Management of Property and Construction, 10 (1). pp. 4-18. ISSN 1366-4387 Moropoulou, A., Avdelidis, N.P. and Delegou, E.T. (2005) NDT and planning on historic buildings and complexes for the protection of cultural heritage. In: van Grieken, R. and Janssens, K. (eds.) Cultural Heritage Conservation and Environmental Impact Assessment by Non-Destructive Testing and Micro-Analysis. Taylor and Francis, pp. 67-76. ISBN 9780849307324 Moropoulou, A., Avdelidis, N.P., Labropoulos, K., Moundoulas, P., Polymenakou, D., Stavrakas, D. and Terezakis, P. (2005) Use of thermography and fibre optics microscopy for the evaluation of railway structures in the Athens Metro in Greece (Invited Paper). Thermosense XXVII, 5782. pp. 371-378. doi: https://doi.org/10.1117/12.601085 Nanayakkara, L. (2005) An empirically grounded framework for human resource management in the Sri Lankan construction industry. In: ARCOM, School of Oriental and African Studies. Plummer, S.F., Garaiova, I., Sarvotham, T., Cotterel, L., Le Scouiller, S., Weaver, M.A., Tang, J., Dee, P. and Hunter, J. (2005) The effects of probiotics on the composition of the intestinal microbiota following antibiotic therapy. International Journal of Antimicrobial Agents, 26 (1). pp. 69-74. ISSN 0924-8579 doi: https://doi.org/10.1016/j.ijantimicag.2005.04.004 Ridge, I. M. L. and Hobbs, R. E. (2005) Torque in mooring chain. Part 2: Experimental investigation. Journal of Strain Analysis for Engineering Design, 40 (7). pp. 715-728. ISSN 0309-3247 doi: https://doi.org/10.1243/030932405x30876 Shipworth, D. (2005) Integrating sustainable consumption and production: Linking models of the sociology of consumption with the national environmental accounting of production. In: 37th World Congress of the International Institute of Sociology, Stockholm, Sweden. Shipworth, D. (2005) Synergies and conflicts on the landscape of domestic energy consumption: beyond metaphor. In: 7th European Council for an Energy Efficient Economy Summer Study, Mandelieu, France. Shipworth, D. (2005) Truth in complex adaptive systems models should be based on truth by constructive verification. In: Complexity, Science and Society Conference, Liverpool, UK. doi: https://doi.org/10.1142/9789812707420_0009 Shipworth, M. (2005) Transdisciplinarity in the sociology of energy use. In: 37th World Congress of the International Institute of Sociology, Stockholm, Sweden. Shipworth, M. (2005) Translating research into practice: Lessons from a report to the Australian Greenhouse Office. In: EPUK4 - 4th Environmental Psychology in the UK Conference: Putting research into practice, Glasgow. Tiburcio, T. (2005) Improving learning environment. In: ICL 2005 - Interactive Computer Aided Learning; School and IT, Austria. Tiburcio, T. (2005) The future of the classroom: Changes and challenges. In: CIB W096 - Architectural Management, Lyngby, Denmark. Tiburcio, T. and Finch, E. (2005) The impact of an intelligent classroom on pupils' interactive behaviour. Facilities, 23 (5/6). pp. 262-278. ISSN 0263-2772 doi: https://doi.org/10.1108/02632770510588664 Tiburcio, T. and Finch, E. (2005) The impact of high-tech learning environments on pupils' interactions. In: Combining Forces- Advancing Facilities Management & Construction through Innovation Series; Facilities Business and its Management, Helsinki. Wu, S. M. (2005) Joint importance of multistate systems. Computers & Industrial Engineering, 49 (1). pp. 63-75. ISSN 0360-8352 doi: https://doi.org/10.1016/j.cie.2005.02.001 2004Baldock, A. and Fulford, D. (2004) Economic potential of large-scale biomass to electricity conversation technologies. In: 2nd World Conference and Technology Exhibition on Biomass for Energy, Industry and Climate Protection, Palazzo dei Congressi, Rome, Italy. Barnett, J.R. and Bonham, V.A. (2004) Cellulose microfibril angle in the cell wall of wood fibres. Biological Reviews, 79 (2). pp. 461-472. ISSN 1464-7931 doi: https://doi.org/10.1017/S1464793103006377 Bonser, R. H. C., Deaton, K. E., Bishop, C. M. and Butler, P. J. (2004) The effect of impaired thyroid function during development on the mechanical properties of avian bone. Journal of Experimental Zoology Part a-Comparative Experimental Biology, 301A (8). pp. 636-641. ISSN 0022-104X doi: https://doi.org/10.1002/jez.a.112 Campbell, L. and Finch, E. (2004) Customer satisfaction and organisational justice. Facilities, 22 (7). pp. 178-189. ISSN 0263-2772 doi: https://doi.org/10.1108/02632770410547543 Campbell, L. and Finch, E. (2004) The development of service level agreements for relocation management - A preliminary framework. In: CIB W70 International Symposium on Facilities Management & Asset Maintenance, Hong Kong. Collis, V.J., Blowey, R.W., Packington, A.J. , Bonser, R.H.C. and Green, L.E. (2004) Testing white line strength in the dairy cow. Journal of Dairy Science, 87 (9). pp. 2874-2880. ISSN 0022-0302 Evans, J.J. and Ridge, I.M.L. (2004) Rope and rope like structures. In: Jenkins, C.J.M. (ed.) Compliant Structures in Nature and Engineering. The International Series on Design & Nature. Vol. 5. WIT press. ISBN 9781853129414 Fisher, N. (2004) A critical review of the management of construction projects. In: International Symposium on the Advancement of Construction management and Real Estate, Hong Kong, China. Flanagan, S. (2004) The REKI project. Access by Design (99). pp. 126-31. Inalhan, G. and Finch, E. (2004) What impact does place attachment have on employees' perception of change? In: EuroFM Conference, Copenhagen. Inalhan, G. and Finch, E. (2004) Place attachment and sense of belonging in the offices. Facilities, 22 (5/6). pp. 120-128. ISSN 0263-2772 Khoo, I. and Cook, M. (2004) Web-based occupant feedback for building energy management systems using fuzzy logic. In: ESDA 2004 on CD-Rom, 7th Biennial ASME Conference, Manchester UK. doi: https://doi.org/10.1115/ESDA2004-58137 Milner, J. and Allen, C. (2004) "I don't know what you are trying to establish": The socio-environmental 'problems' of visual impaired children. Journal of Social Policy and Society, 3 (1). pp. 1-10. ISSN 1474-7464 doi: https://doi.org/10.1017/S1474746403001441 Moore, M. and Finch, E. (2004) Facilities management in South East Asia. Facilities, 22 (9/10). pp. 259-270. ISSN 0263-2772 doi: https://doi.org/10.1108/02632770410555986 Potter, B., Shirsavar, S. and Ridge, I. (2004) Purpose built teaching equipment for a laboratory based course in three phase machines and drives. In: Proceedings of the IEEE International Conference on Mechatronics 2004 ICM 04, pp. 503-508. Potter, B., Shirsavar, S.A. and Ridge, I.M.L. (2004) Purpose built teaching equipment for a laboratory based course in three phase machines and drives. In: International Conference on Mechatronics 2004 (ICM'04), Istanbul, Turkey. Prescott, N. B. and Bonser, R. H. C. (2004) Beak trimming reduces feeding efficiency of hens. Journal of Applied Poultry Research, 13 (3). pp. 468-471. ISSN 1056-6171 Santulli, C. (2004) Biomimetic clues for tissue engineering materials. In: 6th Summer School on Materials, Jesi, Italy. Santulli, C. (2004) Biomimetic interest and possibilities for replacement of glass fibres with plant fibres in composite materials: the case of impact damage. In: Proceedings 5th Summer School on Materials, Jesi. Santulli, C. (2004) Critical length measurements in carbon fibers during single fiber fragmentation tests using acoustic emission. Journal of Materials Science, 39 (8). pp. 2905-2907. ISSN 0022-2461 doi: https://doi.org/10.1023/B:JMSC.0000021477.09656.97 Taylor, A.M., Bonser, R.H.C. and Farrent, J.W. (2004) The influence of hydration on the tensile and compressive properties of avian keratinous tissues. Journal of Materials Science, 39 (3). pp. 939-942. ISSN 0022-2461 doi: https://doi.org/10.1023/B:JMSC.0000012925.92504.08 Vanucci, P. and Vincenti, A. (2004) Recent advances in the optimal design of laminates by the polar-genetic approach. In: 21st ICTAM (XXI International Congress of Theoretical and Applied Mechanics), Warsaw, Poland. Wheal, R, Fulford, D, Wheldon, A. and Oldach, R. (2004) Photovoltaics (PV) in social housing. International Journal of Ambient Energy, 25 (1). ISSN 0143-0750 Winwood, K., Zioupos, P. and Gresle, M. (2004) Microstructural and physical effects in the fatigue behaviour of human cortical bone. Journal of Biomechanics, 41 (Supplement). doi: https://doi.org/10.1016/S0021-9290(08)70385-3 2003Arranz-Piera, P., Fulford, D.J. and Wheldon, A. (2003) Research model for the diffusion of PV: Application to social housing. In: ISES Solar World Congress 2003, Göteborg, Sweden. Bartolo, H. and Bartolo, P. J. S. (2003) COMPUTER assisted technologies to enhance CONCURRENce in building DESIGN. In: Uwakweh, B. O. and Minkarah, I. A. (eds.) Construction Innovation and Global Competitiveness, Vols 1 and 2 - the Organization and Management of Construction. Crc Press-Taylor & Francis Group, Boca Raton, pp. 143-157. ISBN 0849314496 Bonser, R. H. C. and Casinos, A. (2003) Regional variation in cortical bone properties from broiler fowl - a first look. British Poultry Science, 44 (3). pp. 350-354. ISSN 0007-1668 doi: https://doi.org/10.1080/0007166031000085571 Bonser, R. H. C., Farrent, J. W. and Taylor, A. M. (2003) Assessing the frictional and abrasion-resisting properties of hooves and claws. Biosystems Engineering, 86 (2). pp. 253-256. ISSN 1537-5110 doi: https://doi.org/10.1016/s1537-5110(03)00136-3 Bradon, J. E. and Ridge, I. M. L. (2003) Comparison of white metal and resin socket terminations for wire ropes. Journal of Strain Analysis for Engineering Design, 38 (2). pp. 149-160. ISSN 0309-3247 doi: https://doi.org/10.1243/030932403321163677 Bright, K.T. (2003) Housing for older people with sensory impairments. In: 10th Annual Conference of the Housing, Care and Support Journal, UMIST, UK. Bright, K.T. (2003) Inclusive environments - Including everyone. Directions 29, Newsletter of the Sign Design Society. pp. 5-7. Cameron, G. J., Wess, T. J. and Bonser, R. H. C. (2003) Young's modulus varies with differential orientation of keratin in feathers. Journal of Structural Biology, 143 (2). pp. 118-123. ISSN 1047-8477 doi: https://doi.org/10.1016/s1047-8477(03)00142-4 Cotton, J.R., Zioupos, P., Winwood, K. and Taylor, M. (2003) Analysis of creep strain during tensile fatigue of cortical bone. Journal of Biomechanics, 36 (7). pp. 943-949. ISSN 0021-9290 doi: https://doi.org/10.1016/S0021-9290(03)00063-0 Finch, E. (2003) The untethered facilities manager. Facilities, 21 (5/6). pp. 126-133. ISSN 0263-2772 doi: https://doi.org/10.1108/02632770310476958 Hilburn, H. (2003) The Budapest Arena - an international sporting challenge. APM Yearbook 2003/2004. pp. 39-40. Huang, C. , Fisher, N. , Suchocki, M. and Spreadborough, A. (2003) IT innovation adoption within AEC sector: Using the analytic network process. In: The International Symposium on "Advancement of Construction Management and Real Estate", Macau. Huang, C., Fisher, N. , Spreadborough, A. and Suchocki, M. (2003) Identifying the critical factors of IT innovations adoption and implementation within construction industry. In: Second International Conference on Construction in the 21st Century (CITC-II) "Sustainability and Innovation in Management and Technology", Hong Kong.
Hughes, Will Jackson, S. (2003) A whole life design appraisal tool. In: Uwakweh, B. O. and Minkarah, I. A. (eds.) Construction Innovation and Global Competitiveness, Vols 1 and 2 - the Organization and Management of Construction. Crc Press-Taylor & Francis Group, Boca Raton, pp. 698-709. ISBN 9780849314490 Milner, J. (2003) Housing quality and design: The invisible children. In: Include 2003, Roal College of Art, London. Milner, J. (2003) The children that time forgot: Reframing housing standards to incorporate children's needs. In: Healthy Housing: Promoting Good Health Conference, Warwick University, UK. Milner, J. and Madigan, R. (2003) Regulation and innovation: Rethinking 'inclusive' housing design. Housing Studies, 19 (5). pp. 727-744. ISSN 0267-3037 doi: https://doi.org/10.1080/0267303042000249170 Potter, B. A., Shirsavar, S. A. and McCulloch, M. D. (2003) Optimal inverter design for an induction machine using resonant frequency matching. In: Electric Machines and Drives Conference 2003 IEMDC03 IEEE International. Santulli, C. (2003) Impact damage characterisation of thermoplastic matrix composites using transmission transient thermography. Nondestructive Testing and Evaluation, 19 (3). 79 - 90. ISSN 1058-9759 doi: https://doi.org/10.1080/10589759310001642206 Santulli, C. (2003) Study of impact hysteresis curves on e-glass reinforced polypropylene laminates. Journal of Materials Science Letters, 22 (22). pp. 1557-1562. ISSN 0261-8028 doi: https://doi.org/10.1023/A:1026315920448 Santulli, C. (2003) Uso della termografia per la valutazione del danneggiamento dopo impatto di compositi e componenti automobilistici (IR Thermography for impact damage evaluation of automotive composites and components. Giornale delle Prove Non Distruttive. Monitoraggio e Diagnostica, 24 (3). pp. 27-31. Shipworth, D. (2003) A stochastic LCA framework for embodied greenhouse gas analysis: Integrating process and I-O data within a Bayesian graphical model. In: The International Life Cycle Assessment/Life Cycle Management 2003 conference, Seattle, USA. Shipworth, D. (2003) Book review: Sustainable development: Understanding the green debates. Construction Management and Economics, 21 (5). pp. 544-545. ISSN 0144-6193 doi: https://doi.org/10.1080/0144619032000093332 Shipworth, D. (2003) Eco-design: Reflecting a nascent field. Building Research & Information, 31 (6). pp. 489-494. ISSN 0961-3218 doi: https://doi.org/10.1080/0961321031000066516 Shipworth, D. (2003) Hitting emissions targets with (statistical) confidence in multi-instrument Emissions Trading Schemes. Climate Policy, 352 (Special Su). pp. 575-587. ISSN 1469-3062 doi: https://doi.org/10.1016/j.clipol.2003.09.007 Wheal, R. , Fulford, D., Wheldon, A. and Oldach, R. (2003) Photovoltaics (PV) in Social Housing. In: Conference C79 of the Solar Energy Society, Loughborough. Yohannes, I., Gillham, S.A., Bright, K.T. and Baldwin, S., (2003) The gaps in information provision to travellers with disabilities in London: Exploratory study report. TfL, London. 1996Hughes, Will, (1996) EIC/FIDIC questionnaire survey: the use of the FIDIC red book - final report. Project Report. Department of Construction Management & Engineering, Reading. pp47. 1992
Murdoch, John and Hughes, Will |