Items where Division is "School of the Built Environment" and Year is 2007Number of items: 137. A
Abbott, C., Sexton, M., Jones, V. and Lu, S.-L. Alnaser, N. W. and Flanagan, R. (2007) The need of sustainable buildings construction in the Kingdom of Bahrain. Building and Environment, 42 (1). pp. 495-506. ISSN 0360-1323 doi: 10.1016/j.buildenv.2005.08.032 Alnaser, N. W., Flanagan, R., Al-Khalifa, S. E., Mumtaz, R., El-Masri, S. and Alnaser, W. E. (2007) Architectural, construction and environmental matters of Bahrain's international formula 1 circuit. Building and Environment, 42 (4). pp. 1783-1794. ISSN 0360-1323 doi: 10.1016/j.buildenv.2006.01.014
Ardehali, M. M., Shahrestani, M. B
Balakrishnan, B., Nikolic, D. Bonser, R. H. C. and Vincent, J. F. V. (2007) Technology trajectories, innovation, and the growth of biomimetics. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 221 (10). pp. 1177-1180. ISSN 0954-4062 doi: 10.1243/09544062jmes522 Boudeau, C. (2007) Producing threat assessments: an ethnomethodological perspective on intelligence on Iraq’s aluminium tubes. In: Rappert, B. (ed.) Technology and Security: Governing Threats in the New Millennium. New Security Challenges. Palgrave Macmillan, pp. 66-88. ISBN 9780230019706 Bradon, J. E., Chaplin, C. R. and Ermolaeva, N. S. (2007) Modelling the cabling of rope systems. Engineering Failure Analysis, 14 (5). pp. 920-934. ISSN 1350-6307 doi: 10.1016/j.engfailanal.2006.11.032 CCardellino, P. and Clements-Croome, D. (2007) Design quality in schools: Identifying suitable procurement and briefing processes. In: Proceedings of Clima 2007 Well-Being Indoors, Helsinki. Chaplin, C.R., Bradon, J.E. and Ridge, I.M.L. (2007) Modelling fatigue damage distribution to inform slip and cut policy for riser tensioner ropes. In: OIPEEC Conference: ‘How to get the most out of your ropes’, Johannesburg, pp. 15-26. Chen, Z. and Clements-Croome, D. (2007) An intelligent decision support system for the design and construction of building envelopes. In: Clima 2007 WellBeing Indoors, Helsinki. Chen, Z., Clements-Croome, D. J., Hong, J., Li, H. and Xu, Q. (2007) The closure of "A multicriteria lifespan energy efficiency approach to intelligent building assessment". Energy and Buildings, 39 (4). pp. 506-507. ISSN 0378-7788 doi: 10.1016/j.enbuild.2007.01.002 Cho, Y. and Awbi, H. B. (2007) A study of the effect of heat source location in a ventilated room using multiple regression analysis. Building and Environment, 42 (5). pp. 2072-2082. ISSN 0360-1323 doi: 10.1016/j.buildenv.2006.03.008 Clements-Croome, D. J. (2007) A triz based value management process for selecting façade solutions. The Value Manager, 13 (2). pp. 3-8. ISSN 1029-0982 Clements-Croome, D., Wu, S. and John, G. (2007) High-quality building services based on whole-life value. University of Reading, pp55. ISBN 9780704998865 Clements-Croome, D.J. (2007) Challenges and opportunities for intelligent buildings in the 21st Century. Magyar Epületgépészet, 3 (11). doi: 10.1049/ic.2009.0222 Clifford, C., Elmualim, A. A. and Child, F. (2007) Current challenges and novel solutions in workspace management at Nationwide Building Society. In: BIFM Annual Conference, Keble College, Oxford. Clifford, C., Elmualim, A. A. and Child, F. (2007) Pervasive technologies for workspace management at Nationwide Building Society. In: CIB World Building Congress: Construction for Development, Cape Town, South Africa, pp. 755-767. Cook, G. K., Le Scoullier, S. and Booy, D. A. (2007) Innovation in light reflectance value - measurement and application. In: 26th Session of the CIE, 4-11 July 2007, Beijing, China, pp. 130-133. D
Dainty, A., Green, S. Dainty, A., Green, S. and Bagilhole, B., eds. (2007) People and culture in construction: A Reader. Spon, London. ISBN 9780415348706
Dixon, T.
Dixon, T.
Dixon, T. Dunn, P.D., Burton, J.D., Xu, X. and Atkins, A. G. (2007) Paths swept out by initially slack flexible wires when cutting soft soliods; when passing through a very viscous medium; and during regelation. Proceedings of the Royal Society A, 463. pp. 1-20. ISSN 01364-502
Dutton, S. and Shao, L. EElmualim, A. A. (2007) Building performance measurements and the new paradigm of FM integration. In: International Networking for Young Scientists: Policy Issues of Sustainable Built Environment Research, The British Council Hong Kong and Hong Kong Polytechnic University, Hong Kong. Elmualim, A. A. (2007) Psycho-social approach for discerning the dichotomy of competition and collaboration to advance mutualistic relationships in construction. In: CME25: Construction Management and Economics: past, present and the future, University of Reading, Reading, UK. Elmualim, A. A. (2007) The sustainability debate within the UK and beyond. In: International Networking for Young Scientists: Policy Issues of Sustainable Built Environment Research, The British Council Hong Kong and Hong Kong Polytechnic University, Hong Kong. Ewenstein, B. and Whyte, J. (2007) Beyond words: Aesthetic knowledge and knowing in design. Organization Studies, 28 (5). pp. 689-708. ISSN 0170-8406 doi: 10.1177/0170840607078080 Ewenstein, B. and Whyte, J. K. (2007) Visual representations as 'artifacts of knowing'. Building Research and Information, 35 (1 (Special). pp. 81-89. ISSN 0961-3218 doi: 10.1080/09613210600950377 FFlanagan, R. (2007) An African perspective on changes influencing the construction sector. In: CIDB Annual Conference, University of Stellenbosch and CIDB South Africa.. Flanagan, R. (2007) Competitiveness of Nordic construction enterprises. In: Nordic Conference in construction economics and organisation, University of Technology, Lulea, p. 10. Flanagan, R. (2007) Creating competitive advantage for the engineering sector. In: Proceedings of Annual Conference of the New Zealand Association of Consulting Engineers, Napier. Flanagan, R. (2007) Drivers and issues for the Hong Kong construction sector. In: UNSPECIFIED, Hong Kong. Flanagan, R. (2007) Internationalisation of the Chinese construction sector. In: UNSPECIFIED, Chongqing University. Flanagan, R., (2007) Vision 2020 for procurement in the construction sector. CIDB Malaysia, Malaysian Association of Engineers, Kuala Lumpur, Malaysia. Flanagan, R. (2007) Trends shaping the construction sector. In: Innovations in Structural Engineering and Construction, The Netherlands, p. 1588. Flanagan, R. (2007) The drivers and issues shaping the construction sector. In: Innovations in structural engineering and construction, Melbourne, Australia, pp. 3-13. Flanagan, R., Lu, W., Shen, L. and Jewell, C.A. (2007) Competitiveness in construction: a critical review of research. Construction Management and Economics, 25 (9). pp. 989-1000. ISSN 0144-6193 doi: 10.1080/01446190701258039 GGoodacre, K., McCreadie, C., Flanagan, S. and Lansley, P. (2007) Enabling older people to stay at home: How adaptable are existing properties? British Journal of Occupational Therapy, 70 (1). pp. 5-15. ISSN 0308-0226 Goodier, C.I., Soetanto, R., Dainty, A. R.J., Larsen, G.D. and Quigley, M. (2007) Towards sustained competitiveness in UK construction: A multi-methodological approach. In: Proc of CIB World Building Congress: Construction for Development, Cape Town, pp. 915-927. Goulding, J., Sexton, M. G., Zhang, X., Kagioglou, M., Aouad, G. and Barrett, P. (2007) Technology adoption: breaking down barriers using a virtual reality design support tool for hybrid concrete. Construction Management and Economics, 25 (12). pp. 1239-1250. ISSN 0144-6193 doi: 10.1080/01446190701504234 Gray, C. (2007) The I-WASP Generation. Building (8). Gray, C., Al-Bizri, S. and Atkin, B. L. (2007) Web supported process management to achieve consistent international project team integration and performance. In: CIB World Congress, Cape Town, South Africa, pp. 1062-1071. Gray, C. and Al Bizri, S. (2007) Modelling trade contractor information production. Architectural Engineering and Design Management, 3 (1). pp. 39-48. ISSN 1745-2007 Gray, C. and Al-Bizri, S. (2007) Modelling trade contractor information production. Architectural Engineering and Design Management, 3 (1). pp. 39-48. ISSN 1745-2007 Gray, C. and Davies, R.J. (2007) Perspectives on experiences of innovation: the development of an assessment methodology appropriate to construction project organizations. Construction Management and Economics, 25 (12). pp. 1251-1268. ISSN 0144-6193 doi: 10.1080/01446190701573692
Green, S. D.
Gruneberg, S.L., Hughes, W.P. HHarty, C. (2007) Implementing innovation: Transforming practices and technologies in construction work. In: CIB World Congress, Cape Town, South Africa. Harty, C. (2007) Objects and subjects: The role of technology in the production of construction practice. In: Managing the construction of buildings, Copenhagen Business School. Harty, C. and Leiringer, R. (2007) Social science research and construction: Balancing rigour and relevance. In: Construction Management and Economics 25th Anniversary Conference, Reading. Harty, C., Goodier, C., Soetanto, R., Austin, S., Dainty, A. and Price, A.D.F. (2007) The futures of construction: A critical review of construction future studies. Construction Management and Economics, 25 (5). pp. 477-493. ISSN 0144-6193 doi: 10.1080/01446190600879117
Hillig, J.-B. and Hughes, W.P. Hillig, J.B. (2007) The contractor's quality obligations: different concepts under English and German contract law. In: Proceedings CIB World Construction Congress: Construction for Development, Cape Town, South Africa, pp. 2169-2181. Hou, J. P., Cherruault, J. Y., Nairne, I., Jeronimidis, G. and Mayer, R. M. (2007) Evolution of the eye-end design of a composite leaf spring for heavy axle loads. Composite Structures, 78 (3). pp. 351-358. ISSN 0263-8223 doi: 10.1016/j.compstruct.2005.10.008
Hughes, W. P.
Hughes, W.P. Humphries, S., Bonser, R. H. C., Witton, M. P. and Martill, D. M. (2007) Did pterosaurs feed by skimming? Physical modelling and anatomical evaluation of an unusual feeding method. PLoS Biology, 5 (8). pp. 1647-1655. ISSN 1544-9173 doi: 10.1371/journal.pbio.0050204 IIngirige, B. and Sexton, M. G. (2007) Understanding construction alliances: their rationale and design. RICS Research Paper Series, 7 (4). pp. 5-33. Ingirige, B. and Sexton, M. G. (2007) Intranets in large construction organizations: exploring advancements, capabilities and barriers. ITcon, 12. pp. 409-427. ISSN 1874-4753 JJewell, C.A., Flanagan, R. and Lu, W. (2007) Measuring competitiveness in the construction sector: a new perspective. In: CME 25 Conference, Reading, UK. Jiang, D., Bibas, A., Santuli, C., Donnelly, N., Jeronimidis, G. and O'Connor, A. F. (2007) Equivalent noise level generated by drilling onto the ossicular chain as measured by laser Doppler vibrometry: A temporal bone study. Laryngoscope, 117 (6). pp. 1040-1045. ISSN 0023-852X doi: 10.1097/MLG.0b013e3180459a10 KKao, C.C. and Larsen, G.D.. (2007) Competitiveness and procurement strategy: A client-contractor partnership. In: Proc of CIB W92 Symposium: Building Across Borders, Hunter Valley, Australia, pp. 335-343. Karimipanah, T., Awbi, H.B., Sandberg, M. and Blomqvist, C. (2007) Investigation of air quality, comfort parameters and effectiveness for two floor-level air supply systems in classrooms. Building and Environment, 42 (2). pp. 647-655. ISSN 0360-1323 doi: 10.1016/j.buildenv.2005.10.016 Klemeš, J., Bulatov, I. and Cockerill, T. (2007) Techno-economic modelling and cost functions of CO2 capture processes. Computers & Chemical Engineering, 31 (5/6 (Speci). pp. 445-455. ISSN 0098-1354 doi: 10.1016/j.compchemeng.2006.06.002
Kwawu, W. and Hughes, W.P. LLansley, P. (2007) Ageing research on the move, realities of action: Research into action. In: BSG Annual Conference, Sheffield. Lansley, P. (2007) Growing older but staying put. In: FICCDAT, Caregiving, Disability, Aging and Technology, Toronto. Lansley, P. and Smith, V. (2007) Building capacity for ageing and disability-related research. In: Include 2007: designing with people- An international conference on inclusive design, Royal College of Art, London, p. 5. Lansley, P. and Smith, V. (2007) Stimulating ageing research from the bottom up. In: FICCDAT, Caregiving, Disability, Aging and Technology, Toronto. Lansley, P. (2007) Making sense of research quality assessment. Engineering, Construction and Architectural Management, 14 (1). pp. 7-25. ISSN 0969-9988 doi: 10.1108/09699980710716954
Larsen, G. D., Green, S. D.
Larsen, G. D., Green, S. D. Laryea, S. (2007) The price of risk in construction projects: contingency approximation model (CAM). In: 5th International Conference on Construction Project Management / 2nd International Conference on Construction Engineering and Management, 1-2 March 2007, Nanyang Technological University, Singapore.
Laryea, S., Badu, E. and Hughes, W.P. Laryea, S. A. (2007) An experimental approach to project risk identification and prioritization. In: Construction Management and Economics 25th Anniversary Conference, 15-18 July 2007, University of Reading, UK. Lee, A. and Sexton, M. G. (2007) nD modeling: industry uptake considerations. Construction Innovation: Information, Process, Management, 7 (3). pp. 288-302. ISSN 1471-4175 doi: 10.1108/14714170710754768
Leiringer, R. and Green, S. D.
Leiringer, R., Green, S. D.
Leiringer, R., Green, S. D.
Li, B., Liu, J. and Yao, R.
Li, B., Yao, R. Li, Q., Ballal, T., Elhag, T. and Liyanage, C. (2007) Procurement for innovation: a theoretical proposition for enabling innovation diffusion in PFI projects. In: CIB W092: Interdisciplinarity in Built Environment Procurement conference, NSW, Australia.
Liang, J., Li, B. Z., Wu, Y. and Yao, R. M.
Liu, M., Li, B. Z. and Yao, R. M.
Lu, S.-L. Lu, W., Flanagan, R., Pekericli, M.K. and Jewell, C.A. (2007) From situation analysis to decision options: An improved SWOT approach. In: CME 25 Conference, Reading, UK. Lu, W., Yohannes, I., Pekericli, M.K. and Hillig, J.-B. (2007) Incentives to overcome barriers to information/knowledge sharing in construction. In: KIM Conference, Loughborough. Luck, R. (2007) Learning to talk to users in participatory design situations. Design Studies, 28 (3). pp. 217-242. ISSN 0142-694X doi: 10.1016/j.destud.2007.02.002 (special issue 'Participatory Design') Luck, R. (2007) Using artefacts to mediate understanding in design conversations. Building Research and Information, 35 (Special Is). pp. 28-41. ISSN 0961-3218 doi: 10.1080/09613210600879949 Ludlow, G. and Elmualim, A.A. (2007) Future tools for sustainable facilities management. In: BIFM Annual Conference: Shaping the future - the next five years, Keble College, Oxford. Ludlow, G. and Elmualim, A.A. (2007) Sustainable facilities management round table workshop. In: BIFM Annual Conference: Shaping the future - the next five years, Keble College, Oxford.
Luo, Z.
Luo, Z. MMahyuddin, N. and Awbi, H. B. (2007) Developing a method to characterize indoor environmental parameters in naturally ventilated classrooms. In: Braganca, L., Pinheiro, M., Jalali, S., Mateus, R., Amoeda, R. and Guedes, M. C. (eds.) Portugal Sb07 - Sustainable Construction, Materials and Practices: Challenge of the Industry for the New Millennium, Pts 1 and 2. I O S Press, Amsterdam, pp. 411-417. ISBN 9781586037857 Mao, W., Clements-Croome, D. and Mao, L. (2007) A sense diary system for intelligent buildings. In: Proc of Clima 2007 WellBeing Indoors, Helsinki.
Mohareb, E. N
Ndekugri, I., Smith, N. and Hughes, W.P. Nielsen, P.V., Allard, F., Awbi, H.B., Davidson, L. and Schälin, A. (2007) Computational fluid dynamics in ventilation design. REHVA Guide Book 10. RHEVA (Federation of European Heating and Air-Conditioning Association), Brussels. ISBN 9782960046892 Noy, P., Liu, K. and Clements-Croome, D. (2007) Using semiotics to understand the interplay between people and buildings. In: Proc of Clima 2007 WellBeing Indoors, Helsinki. PPekericli, M.K., Lu, W., Flanagan, R. and Jewell, C.A. (2007) A review of decision theory and decision support systems. In: KIM Conference, Loughborough.
Phua, F.
Phua, F. T. T. Potter, B. A., Shirsavar, S. A. and McCulloch, M.D. (2007) Study of the variation of the input impedance of induction machines with frequency. IET Electric Power Applications, 1 (1). pp. 36-42. ISSN 1751-8660 doi: 10.1049/iet-epa:20050524 RRadosavljevic, M. (2007) General systems perspective on achieving continuous synergy in a project organisation. In: Construction Management and Economics 25th Anniversary Conference, 16-18 July 2007, University of Reading, UK. Radosavljevic, M. (2007) Promoting innovation and exceptional performance in the Scottish construction industry. In: 27th Conference on Entrepreneurship and Innovation, 21-22 March 2007, Maribor, Slovenia. Radosavljevic, M. and Horner, R. M. W. (2007) Process planning methodology: dynamic short-term planning for off-site construction in Slovenia. Construction Management and Economics, 25 (2). pp. 143-156. ISSN 0144-6193 doi: 10.1080/01446190601026494 SSantulli, C. (2007) Impact properties of glass/plant fibre hybrid laminates. Journal of Materials Science, 42 (11). pp. 3699-3707. ISSN 0022-2461 doi: 10.1007/s10853-006-0662-y
Sexton, M., Kähkönen, K. and Lu, S.-L. Shen, L., Bao, H., Wu, Y. and Lu, W. (2007) Using bargaining-game theory for negotiating concession period for BOT-type contract. Journal of Construction Management and Engineering, 133 (5). pp. 385-392. ISSN 1943-7862 doi: 10.1061/(ASCE)0733-9364(2007)133:5(385) Shipworth, D. (2007) Forum - The Stern review: implications for construction. Building Research and Information, 35 (4 (Special). pp. 478-484. ISSN 0961-3218 doi: 10.1080/09613210701330123 Shipworth, D. (2007) Truth in complex adaptive systems models should be based on truth by constructive verification. In: Aerts, D., Edmonds, B. and Gershenson, C. (eds.) Worldviews, Science and Us: Philosophy and Complexity. World Scientific, New York, pp. 141-155. ISBN 9789812705488 9789812707420 (ebook) Shipworth, M. (2007) Changes in English home heating practices from 1984 to 2007: empirical data from a replication survey. In: The 7th biennial conference on Environmental Psychology, Bayreuth, Germany. Smith, S. T., Wu, S. and Riffat, S. (2007) Case Study: Method of investigation of a commercial building's comfort levels. Highlighting energy efficiency concerns. In: 6th International Conference on Sustainable Energy Technologies, Santiago Chile. TTamás, G., Clements-Croome, D. and Wu, S. (2007) The use of wireless data communication and body sensing devices to evaluate occupants' comfort in buildings. In: Clima 2007 WellBeing Indoors, Helsinki.
Torriti, J.
Torriti, J. Turner, W. and Awbi, H. (2007) Hybrid ventilation for cooling application. In: ROOMVENT 2007, Helsinki.
Tutt, D. Tzortzopoulis, P. and Sexton, M. G. (2007) An investigation on the implementation on product development process models in construction companies. Construction Management and Economics, 25 (11). pp. 1153-1164. ISSN 0144-6193 doi: 10.1080/01446190701468851 Täube, F.A. and Whyte, J.K. (2007) Technology sourcing, knowledge management and governance in international inter-organizational innovation networks. In: DRUID - Summer Conference 2007 on appropriability, proximity, routines and innovation. WWhyte, J. and Hargadon, A. (2007) Technological change as a process of inquiry: re-imagining glass as a structural material. In: Managing the Construction of Buildings, Copenhagen, Denmark. Whyte, J., Ewenstein, B.E., Hales, M. and Tidd, J. (2007) Visual practices in two contrasting design settings. In: Managing the Construction of Buildings, Copenhagen, Denmark. Whyte, J. (2007) Evolutionary theories and design practices. Design Issues, 23 (2). pp. 46-54. ISSN 0747-9360 doi: 10.1162/desi.2007.23.2.46 Whyte, J.K. (2007) Book review: The Oxford handbook of innovation management edited by Jan Fagerberg, David C. Mowery and Richard R. Nelson. Organization Studies, 28 (4). pp. 589-593. Whyte, J.K., Ewenstein, B.E., Hales, M. and Tidd, J. (2007) Knowledge and innovation through visual practices. In: EGOS 2007: Dances of Individuals and Organization, Vienna, Austria. Whyte, J.K., Ewenstein, B., Hales, M. and Tidd, J. (2007) Visual practices and the objects of design. Building Research and Information, 35 (1 Special ). pp. 18-27. ISSN 0961-3218 doi: 10.1080/09613210601036697 Wu, S. M. and Li, H. Q. (2007) Warranty cost analysis for products with a dormant state. European Journal of Operational Research, 182 (3). pp. 1285-1293. ISSN 0377-2217 doi: 10.1016/j.ejor.2006.09.056 Wu, S. and Clements-Croome, D. (2007) Burn-in policies for products having dormant states. Reliability Engineering & System Safety, 92 (3). pp. 278-285. ISSN 0951-8320 doi: 10.1016/j.ress.2006.04.003 Wu, S. and Clements-Croome, D. (2007) Estimating the relationship among occupant behaviours and indoor environmental parameters using Bayesian networks. In: Clima 2007 Wellbeing Indoors, Helsinki. Wu, S. and Clements-Croome, D. (2007) Understanding the indoor environment through mining sensory data - a case study. Energy and Buildings, 39 (11). pp. 1183-1191. ISSN 0378-7788 doi: 10.1016/j.enbuild.2006.07.011 Y
Yang, Y., Li, B. and Yao, R. Yong, C.Y., Qiao, B., Wilson, D.J., Wu, M., Clements-Croome, D.J., Liu, K., Egan, R. and Guy, C.G. (2007) Coordinated management of intelligent pervasive spaces. In: Proc of the 5th IEEE International Conference on Industrial Informatics (INDIN), Vienna, Austria. doi: 10.1109/INDIN.2007.4384813 ZZhao, Y., Tang, L. C. M., Darlington, M. J., Austin, S. A. and Culley, S. J. (2007) Establishing information valuing characteristics for engineering design information. In: Proceedings of the 16th International Conference on Engineering Design (ICED07). The Design Society, pp. 537-538. ISBN 1904670016 (Full paper number: DS42_P_144) Zhao, Y., Tang, L. C. M., Darlington, M. J., Austin, S. A. and Culley, S. J. (2007) High value information in engineering organisations. In: KIM Project Conference 2007, 28-29 March 2007, Loughborough University, UK. |